Products in Infrastructure, Roads & Paving

MultiTech MultiFunctional Q is a highly versatile simple carboxylic acid used in a wide variety of applications. Formic Acid is miscible with water and other organic substances. It is inherently biodegradable and meets the sustainability requirements to be considered a low carbon footprint product.

Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

MultiTech Solvent D meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of: Building and Construction Construction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks. Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products. Automotive & Transportation Automotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications. Electrical & Electronics Devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications. Healthcare & Pharma Oral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications.  Paints & Coatings Architectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.

Composite Materials Reinforcement A is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Composite Materials Core Material C is an ideal material for making permeable surfaces. Combined with IG040 slabs, it allows the creation of parking spaces or even stable access routes while maintaining soil permeability in urban areas. Flexible and fitted with thick walls, IG040 tiles guarantee the strength and longevity of your projects. Between the walls of the slab, the gravel remains in place and increases the stability of the whole. IG040 tiles, easy to install, are delivered pre-assembled by 4 and are assembled using a simple and robust fixing system. The lightness of the slabs and their preassembly ensure a quick installation allowing you to carry out several hundreds of m² per day.

DiTech Rheology Modifier is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals.

Plastics Dye is a soluble organic dye used for coloring a wide range of thermoplastic polymers and fibers (PS, SB, SAN, PMMA, PC, ABS and their blends, PPO, rigid PVC, PET, PBT, PLA, polyamides). They have a very high coloring strength and high heat stability.

DiTech Effect Pigment A are rare earth alkaline mineral crystals. They are manufactured to the highest standards and can be charged an infinite number of times. Afterglow is up to 50 times longer than traditional phosphorescent zinc sulfide pigments. Their light fastness is also considerably higher when compared to zinc sulfide pigments

IAM Cationic Surfactant is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

DiTech MultiFunctional D is a polyhydric alcohol that creates a foam with high expansion factor. It is used for intumescent coating systems. Benefits Allows customization of the intumescent system performance Provides increased thermal insulation in confined spaces Features Contains four primary hydroxyl groups, milled into small, controlled particles (less than 15 microns)

MultiTech MultiFunctional R is a highly versatile simple carboxylic acid used in a wide variety of applications. Formic Acid is miscible with water and other organic substances. It is inherently biodegradable and meets the sustainability requirements to be considered a low carbon footprint product.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

ETONIS® 1400 S is a polymer dispersion designed for soil stabilization purposes. When applied to the soil, this product creates polymer bridges between the soil or aggregate particles and the hydrated cement particles. These bridges contribute to the formation of a flexible and strong network that is both durable and resistant to water.

SILRES® BS 280 CF is a solvent-free silicone concentrate based on silane or siloxane. Like SILRES® BS 280, it can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 CF serve as high-quality water repellents for impregnating mineral building materials, particularly silicate-free natural stones like limestone or gypsum. It also develops its water-repellent effect through a reaction with atmospheric humidity.

SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).

SILRES® BS 1316 is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It is a mixture of isomeric octyltrimethoxysilanes, with isooctyltrimethoxysilane as the main component. SILRES® BS 1316 is specifically recommended as a water-repellent impregnating agent and primer for normal and reinforced concrete in various applications such as bridges, roads, and buildings.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

ETONIS® 7445 A is a rapid-setting vinyl acetate-ethylene copolymer with unique properties. Unlike a high-solids version of the ETONIS® series dispersion, it is specially formulated to provide excellent adhesion and cohesion to challenging substrates such as aggregate, base and sub-base material, and asphalt emulsion. Its superior bonding capabilities make it an ideal choice for various applications.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

SILRES® BS 280 is a solvent-free silicone concentrate based on silane or siloxane. It can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 are high-quality water repellents for impregnating mineral building materials, especially silicate-free natural stones like limestone or gypsum. The water-repellent effect develops after application through a reaction with atmospheric humidity.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

ETONIS® 5150 P is a ready-to-use polymer dispersion specifically designed for special concrete applications. It is particularly well-suited for modifying concrete, especially in shotcrete applications for underground construction, tunneling, and mining. The primary applications of ETONIS® 5150 P include concrete protection and concrete repair.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

ETONIS® 1450 S is a liquid additive designed for soil stabilization. When used in combination with the dispersion ETONIS® 1400 S, the additive ETONIS® 1450 S enhances the performance, especially with soils that have finer particle sizes. To stabilize the soil, ETONIS® 1450 S is added to ETONIS® 1400 S at a dosage of 5 to 10% of the volume of ETONIS® 1400 S, depending on the characteristics of the soil.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

T-Det® 1330 is a nonionic surfactant in liquid form, ideal for industrial additives. With high HLB, it enhances latex emulsion polymers, asphalt emulsions, and offers reduced viscosity creep and good shear stability.

T-Det® 1340 is a liquid surfactant for industrial additives. With high HLB, reduced viscosity creep, and good shear stability, it is ideal for latex emulsion polymers and asphalt emulsions. Excellent freeze/thaw stability ensures durability in various applications.