Products in Building Materials: Resins, Binders & Matrix Materials

DISTITRON® 5119 DSX21ZQ - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

ENYDYNE® T 67665 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Norsodyne® 3338LSE is general purpose laminating resin with low styrene emission, good water resistance, promoted and non-waxed and it is generally used in automotive, building and construction, industrial sector, marine applicatons.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Norsodyne® G-160HV is used for general purpose coatings applicatons.

ASTAMITE C3909 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE C910B is a Pre-Catalyzed Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

G-Etronax® PM GPO 3 is the composite material that does it all. G-Etronax® PM GPO 3 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® PM GPO 3 suitable for countless applications.

SWANCOR 2554-N is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula. It is halogen-free flame retardant products, passed EN45545-2 HL2 flame retardant test, also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

NORSODYNE® C 13133 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Rhino Linings USA, Inc. 1401-21 Resin is a 1401-21 Resin is a Epoxy System for Infusion. Multifunctional epoxy and cycloaliphatic-amine blend hardener for high performance composite parts.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

CHS-EPOXY 512 is a Solvent–free epoxy system with high chemical resistance. Special solvent–free epoxy system, low temperature, wet condition, very fast hardening. Epoxy bonding agent for fixing of metal parts into mortar constructions. Epoxy resin modified with non-reactive modifier, flexibilized.

NORSODYNE® C 16237 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Lattice Composites LCWR250-TT is highly toughened, single component, long shelf life winding resin.

Norsodyne® 2112 - thixotropic, promoted and waxed, lloyd's approved.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.

ISOPHTHALATES IP1029 has Chemical Resistance.

BRE 816 is used as Liner resin and for a high flexibility.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Fiberglass (A/Asia) Sales Pty 901 Swancor VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. Swancor 901 Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 183 CS - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

ASTAMITE C510M is a Melamine Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.