Products in Siding & Trim: Resins, Binders & Matrix Materials

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Terratek® WC200312 is a proprietary blend of wood flour and polypropylene. WC200312 contains 30% wood flour by weight.

Terratek® WC200122 is a proprietary blend of maple wood fiber and polypropylene for injection molding applications. WC200122 contains 15% wood fiber by weight.

Terratek® WC200118 is a proprietary blend of maple wood fiber and polypropylene for injection molding applications. WC200118 contains 30% wood fiber by weight.

Terratek® WC200112 is a proprietary blend of pine wood fiber and polypropylene for injection molding applications. WC200112 contains 15% wood fiber by weight.

Terratek® WC200300 is a proprietary blend of pine wood fiber and reprocessed polypropylene for injection molding applications. WC200300 contains 30% wood fiber by weight.

Terratek® WC200180 is a proprietary blend of wood fiber and nylon for injection molding applications.

Terratek® WC200145 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200145 contains 30% wood flour and with Braskem GreenPE this formulation is fully biobased.

Terratek® WC200140 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200140 contains 15% wood flour and with Braskem GreenPE this formulation is fully biobased.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

ENYDYNE® H 66126 TAE - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

NORSODYNE® F 16207 AEL - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in filament winding,injection molding,rtm method.

Stypol® RSP10022 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polydyne® 6082 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

ENYDYNE® H 66233 TA - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Norsodyne® BR-235A - good workability, flexible type, for rods production. Main applications areas are leisure and clothing etc.

DISTITRON® VE 100 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce reinforced plastics,general purpose,profiles,pipes and tanks through filament winding,pultrusion method.

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

DISTITRON® 3501 S - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through casting method.

Stypol® 040-8086 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 1404 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

DISTITRON® 100 BSX15 - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

NORSODYNE® H 13212 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

EPOVIA RF-2000SE is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

DISTITRON® 120 SV8 - Unsaturated polyester resin in styrene,DCPD. It is used to produce mastics through mix with fillers and/or additives.