Products in Building & Construction: Resins, Binders & Matrix Mater...

MultiTech MultiFunctional L is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparency LED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs MultiTech MultiFunctional L is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Thermoset Resin C is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Akulon® K224-HG6 is a polyamide 6 (PA 6) resin that offers a cost-effective solution and is known for being heat stabilized, lightweight, and having reduced friction properties. They are UL flame-rated as well. They find applications in various markets, including automotive and transportation, building and construction, consumer goods, and industrial sectors.

ForTii® Ace WX53-FC is a high-temperature polyamide with halogen-free and halogen-containing flame retardant grades. It is designed for demanding applications in the electronics, lighting, automotive, white goods, industrial, and aerospace industries. It exhibits best-in-class high-temperature and wet mechanical performance, weldline strength, and weldline strength retention in hot water and steam. ForTii® Ace WX53-FC is a PPA with a high glass transition temperature and extreme chemical resistance, making it suitable for applications requiring high mechanical strength at elevated temperatures. It is processed using injection molding technology and features a USP class VI classification, making it suitable for drinking water contact.

EcoPaXX® Q-HG6 is a long aliphatic polyamide with excellent chemical and hydrolysis resistance. It is suitable for thermal management applications and other structural parts. It offers exceptional chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. The material can be processed using injection molding technology. It is heat stabilized and contains 30% glass reinforcement.

EcoPaXX® Q-DWX10 is a long aliphatic polyamide with excellent mechanical and flow performance, specifically designed for food contact and drinking water applications. It offers exceptional chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. The material can be processed using injection molding technology. It has good surface properties and meets the requirements for drinking water contact quality as well as food contact quality.

LRBG Chemicals USA MUF 400PC is a light tan, free-flowing melamine-urea resin powder designed as an adhesive for hot-press or high-frequency wood bonding systems. When used correctly, it provides a waterproof bond and meets the requirements of the ANSI/AITC A190.1-1992 Standard for Structural Glued Laminated Timber. This resin is ideal for high-frequency, high-strength gluing of truck flooring, rail decks, and other laminated wood structures due to its fast cure and low arcing. However, LRBG Chemicals USA MUF 400PC is not suitable for cold-cure applications.

LRBG Chemicals USA MUF 400-15 is a melamine urea formaldehyde resin spray-dried powder, appearing as a tan to white free-flowing powder. It forms a crust on the surface by absorbing moisture from the air. This powdered resin can be used in container wood flooring adhesive, wood adhesive, and compression molding of wood articles.

LRBG Chemicals USA MF 817 is a melamine resin powder designed for use where superior penetration is needed to impregnate pattern sheets in the production of decorative laminates to achieve optimal craze resistance. Furthermore, LRBG Chemicals USA MF 817 is highly recommended for use in the manufacture of abrasives, including precision diamond cutting wheels, and has been successfully used as a modifier for phenolic resins in the production of sandpaper.

LRBG Chemicals USA MUF 400-6 is a melamine -urea formaldehyde resin spray-dried powder. It appears as a tan to white, free-flowing powder that forms a crust on the surface when exposed to moisture in the air. This powdered resin can be used in container wood flooring adhesives, wood adhesives, and for the compression molding of wood articles.

Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.

Crestapol® 1211A Urethane Acrylate Resin is a partially accelerated, filled, tough urethane acrylate resin designed for applications requiring the highest levels of fire and smoke performance. It incorporates a selected grade of alumina trihydrate (ATH), which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke and toxic fumes are required. This product is halogen-free and does not contain heavy metals.

Crestafire® P1-3001E is a filled, fire retardant unsaturated polyester resin. It incorporates a special grade of alumina trihydrate (ATH), which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. Crestafire® P1-3001E is extra stabilized for transport, storage, and use in high-temperature climates. It is halogen free and does not contain heavy metals.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Fire Retardant Resin 5046PA is a filled, orthophthalic, pre-accelerated, unsaturated polyester resin suitable for fire retardant applications. It is designed for manufacturing composite parts using hand layup or injection processes. This product is ideal for demanding applications in buildings, public transport, and railways. It has excellent fire resistance and a Q rating of 0.53, achieving M1/F2 standards as a fully cured laminate with Gelcoat 967 PA FR. This product has a low viscosity, which lowers consumption and enhances suitability for RTM processes. The low styrene content also provides better comfort for users, and the stability provides low filler sedimentation. Pigments and additional fillers can be added to this resin. However, their effects should be tested in workshop conditions before being added to the formulation.

Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.

Crystic® Transfer Moulding Resin 783PA is a pre-accelerated, isophthalic polyester resin, designed for use in RTM (Resin Transfer Molding). It is a versatile resin, with good mechanical properties and impact resistance, recommended for the manufacture of mouldings for use in structural, high performance applications.

Crystic® Polyester Resin 198 is a medium-viscosity orthophthalic polyester resin with good heat and chemical resistance properties. This product was developed for use in the chemical industry (tanks, pipes, fume stacks, etc.), where heat and chemical resistance are both required, but it can also be used in industrial, transportation, and building and construction applications. It can be used with glass fiber-backed polypropylene and suitably treated uPVC. This product has a high HDT of 112°C and a 12-minute gel time.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin R115NT is a general purpose non thixotropic, non accelerated, orthophthalic, unsaturated polyester resin. It has a gel time of 10 minutes and can be used for the production of filled castings or for reinforced laminates on flat molds.

Crystic® Decorative Casting Resin 911PASA is a pre-accelerated, orthophthalic, unsaturated polyester resin. Its low viscosity helps to accept the maximum level of filler particles. This product is designed for the casting of small details, including collectibles and figurines. It has a 20-minute gel time.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

Crystic® Polyester Resin 474PA is a pre-accelerated, thixotropic version of Crystic 198. Crystic 474PA is an exceptionally versatile resin suitable for the fabrication of laminates for a wide variety of applications throughout the chemical industry, particularly in environments where resistance to heat and chemicals is required.

Crystic® Spray Gelcoat 92PA is a chemical resistant spray gelcoat. It is suitable for the manufacture of bathroom products such as sinks, baths, shower trays and water slides and has been used successfully in the industry for many years. It is easy to use and repair.

Texicryl® AD9122 is a modified styrene acrylic copolymer emulsion that offers excellent water resistance and adhesion to various substrates including wood, rubber and metal. It has been designed for the formulation of low VOC waterbased coatings and can be formulated as mulch coatings for various mulch subatrates.

Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Polyester Resin 2.420PA is a long gel time, low styrene emission, pre-accelerated orthophthalic polyester resin. This laminating resin has a 45-minute gel time and low exotherm, making it suitable for the molding of large structures and thick laminates. Crystic® Polyester Resin 2.402PALV is the low-viscosity version of this product. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications.

Crystic® Fireguard Gelcoat 73PA is a new technology fire retardant brush gelcoat that is halogen free. It has a number of fire approvals with different crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.