Products in Building & Construction: Resins, Binders & Matrix Mater...

Astaply HL4645 offers thermosetting liquid resins, specially formulated for the manufacturing of interior grade plywood. In the cured state, the resin is a cross-linked, insoluble, infusible material.

Distitron® 412 V2 - resin for body, good mechanical properties. Main applications areas are agrochemical, agrobusiness, building and construction, industrial sector etc.

BRE PW05 is used as Filament winding for high mechanical properties.

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

G-Etronax® EP 11 is the composite material that does it all. G-Etronax® EP 11 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® EP 11 suitable for countless applications.

Norsodyne® 2802Base - non-promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Lerpol RS 48 Alogen free, filled resin suitable for HLU/SLU , RTM , Infusion and press molding.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

NORSODYNE® H 32433 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

ASTAMITE C501 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

Ilkalem AS P-1920 is ortho unsaturated polyester resin for GRP applications.

DISTITRON® 5119 DSX21ZQ - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

ENYDYNE® T 67665 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Norsodyne® 3338LSE is general purpose laminating resin with low styrene emission, good water resistance, promoted and non-waxed and it is generally used in automotive, building and construction, industrial sector, marine applicatons.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Norsodyne® G-160HV is used for general purpose coatings applicatons.

ASTAMITE C3909 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE C910B is a Pre-Catalyzed Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

G-Etronax® PM GPO 3 is the composite material that does it all. G-Etronax® PM GPO 3 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® PM GPO 3 suitable for countless applications.

SWANCOR 2554-N is a hot-melt epoxy resin, no Diuron and volatile ingredients in the formula. It is halogen-free flame retardant products, passed EN45545-2 HL2 flame retardant test, also has features such has light weight, excellent mechanical strength, heat resistance and corrosion resistance.

NORSODYNE® C 13133 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Rhino Linings USA, Inc. 1401-21 Resin is a 1401-21 Resin is a Epoxy System for Infusion. Multifunctional epoxy and cycloaliphatic-amine blend hardener for high performance composite parts.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.