ENYDYNE® I 65133 A

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

Brand: ENYDYNE (33 products)

Polymer Name: Polyester (unspecified)

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

Processing Methods: Resin Transfer Molding (RTM)

End Uses: Pipes, Tanks

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyesters,
Unsaturated Polyester (UPE)
Polymer Name: Polyester (unspecified)
Composite Materials Functions: Resins, Binders & Matrix Materials
Technologies: Composite Materials
Product Families: Composite Materials — Polymers & Resins
Thermoset Resins

Features & Benefits

Product Highlights

Preaccelerated
Medium reactivity
Low viscosity

Properties

Typical Properties


	Value	Units	Test Method / Conditions
Solid Content	57 - 61	%	MT-CU001C
Specific weight at 20°C	1,10	g/cm3	-
Brookfield Viscosity at 23°C, sp 1 rpm 50	120 - 160	mPa.s	MT-CU023V
Gel Time	5:30 - 7:30	minutes	MT-CU151R
Exothermic peak	145 - 165	°C	MT-CU151R
Reactivity at 23°C	+ 1,2 Co 1 + 1,5	%	MEKP50
Peak (23°C)	14 - 20	-	-

Cured Properties


	Value	Units	Test Method / Conditions
Elongation at break	1,19	%	ISO 527 (2012)
Curing Cycle at 40°C + 2 h at 90°C (at 120°C for HDT))	16 (2)	hr	-
Tensile strength	38	MPa	ISO 527 (2012)
Tensile Modulus	3848	MPa	ISO 527 (2012)
Flexural strength	62	MPa	ISO 178 (2011)
Flexural modulus	3548	MPa	ISO 178 (2011)
HDT	61	°C	ISO 75 -2A (2013)

Storage & Handling

Shelf Life

6 Months (23°C in Dark )

Handling and Storage

Store in the shade, out of direct sunlight
Keep storage temperature below 25°C
Unseal container just before use
Shelf life will be reduced reaching higher temperature