Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features & Benefits
Features
- ISO - NPG base resin
- Special Pigments
- Easy to apply
- Low styrene content
Benefits
- Excellent water resistanceExcellent chemical resistance
- Longer resistance to whitening
- Excellent surface aspect
- Better comfort for the workers and for the environment
Applications & Uses
- Markets
- Applications
- Application Method
- Composites Processing Methods
- Gel time
Catalyst level and temperature will influence the gel time. At 25°C, typical gel time of Crystic Gelcoat G 976SMK with 2% Butanox M50 is 8 to 10 minutes.
- Application Guidelines
Crystic Gelcoat G 976SMK has been specially designed for the molding of swimming pools. It will provide high chemical and hydrolysis resistance.
Application Temperature 18 – 20°C Dilution Ready for use Catalyst 2% Butanox M50 Nozzle Airless Gun 423 – 631 Pressure 3 to 4.5 bars Distance to Mold 50 cm minimum Wet Film Thickness 600 – 800 microns - Applications
- Crystic Gelcoat G 976SMK has been specially designed for the molding of swimming pools. It will provide high chemical and hydrolysis resistance.
- Formulation Guidelines
Crystic Gelcoat G 976SMK must be allowed to attain workshop temperature before use (18 – 20°C). It is highly recommended to stir the product with a low shear mixer and then to let it rest before use. The product only requires the addition of catalyst to start curing. The recommended catalyst is Butanox M50 (or other equivalent catalyst) which should be added at 2% in the gelcoat.
Properties
- Cured Properties
Value Units Test Method / Conditions Barcol Hardness (Model GYZ 934-1) 45 - - Heat Deflection Temperature (1.8 MPa) 90 °C - Elongation (at break) 3 - 4 % - Tensile Strength 70 MPa - Tensile Modulus 3400 MPa - - Typical Gelcoat Properties (Uncured)
Value Units Test Method / Conditions Viscosity (at 25°C, Brookfield RVT, Sp n°5, 2.5 rpm) 260 - 360 dPa.s - Index of Thixotropy 5.3 - 5.9 - - Specific Gravity (at 25°C) 1.18 - 1.25 - - Stability (at 20°C) 3 Months - Styrene Content 34 - 36 % - - Note
- Curing schedule - Test According to BS 2782:1976
- 1MPa = 1MN/m2 = 1N/mm2 = 10.2 kgf/cm
Technical Details & Test Data
- Recommended Testing
- It is recommended that customers test all pigmented gelcoats before use under their own conditions of application to ensure the required surface finish is achieved.
Packaging & Availability
- Packaging Type
- Packaging
- Crystic Gelcoat G 976SMK is supplied in 25 kg kegs and 200 kg drums
- Variants
Crystic Gelcoat G 976SMK is also available in brush version under the reference Crystic Gelcoat G 976KH.
Storage & Handling
- Storage
- Crystic Gelcoat G 976SMK should be stored in its original container and out of direct sunlight. It is recommended that the storage temperature should be less than 20°C where practical, but should not exceed 30ºC. Ideally, containers should be opened only immediately prior to use.