Products in Building Materials: Resins, Binders & Matrix Materials

Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Decorative Casting Resin 911PA is a pre-accelerated, orthophthalic, unsaturated polyester resin. Its low viscosity helps to accept the maximum level of filler particles. This product is designed for the casting of small details, including collectibles and figurines. It has an 11-minute gel time.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 702PAX is a pre-accelerated orthophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Polyester Resin 703PA is a pre-accelerated dicyclopentadiene (DCPD)-based polyester resin primarily designed for vacuum injection. With its low viscosity and controlled exotherm characteristics, it is particularly suited for large vacuum injections, although other techniques can be used. This resin is approved by Lloyd’s Register of Shipping and has excellent impact resistance, especially due to its compatibility with most reinforcement types. Because of this, it is suitable for a number of heavy-duty applications within the marine, building and construction, and transportation industries. The curing reaction requires only the addition of a catalyst to begin and should be carried out at workshop temperature. The resin, mold, and workshop should all be allowed to reach at least 15°C before the process is carried out. This resin is not ideally suited for the addition of fillers or pigments, and you should get in touch with one of our technical experts before using any additives.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® FR1166 PAK is a filled, orthophtalic, pre accelerated, low styrene content and thixotropic unsaturated polyester resin. It has to be used when excellent low smoke and fire resistant laminates are required. Crystic PD1166 PAK is halogen free and does not contain heavy metals.

Texicryl® 17-0376 is a modified styrene acrylic copolymer emulsion designed for use in high performance anticorrosive primers. It has been specifically designed for the formulation of low VOC waterbased anticorrosive primers which provide excellent salt spray (to ASTM B117), humidity and prohesion resistance on clean metal substrates.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Terratek® WC200312 is a proprietary blend of wood flour and polypropylene. WC200312 contains 30% wood flour by weight.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

Terratek® WC200118 is a proprietary blend of maple wood fiber and polypropylene for injection molding applications. WC200118 contains 30% wood fiber by weight.

NYCOTUFF 2176 is a high viscosity resin particularly suitable for extrusion processing. Its high melt viscosity and extremely good melt strength provides ease of processing for tubing, complex profile, and mandrel extrusion.

XECARB® 2-C30 is a 30% carbon fiber reinforced PA6

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

NYCOTUFF 1595 HS is a medium viscosity Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

Terratek® WC200122 is a proprietary blend of maple wood fiber and polypropylene for injection molding applications. WC200122 contains 15% wood fiber by weight.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

Terratek® WC200112 is a proprietary blend of pine wood fiber and polypropylene for injection molding applications. WC200112 contains 15% wood fiber by weight.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

XECARB® 30-C30 is a 30% carbon fiber reinforced PA6.10

Terratek® WC200300 is a proprietary blend of pine wood fiber and reprocessed polypropylene for injection molding applications. WC200300 contains 30% wood fiber by weight.

Terratek® WC200180 is a proprietary blend of wood fiber and nylon for injection molding applications.

USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.

USP-EAGLE (GP60-65) is Unsaturated Polyester resin pre-accelerated, thixotropic and excellent adhesion to acrylic sheetit is used in a spray, hand lay-up and glass fiber reinforced back lamination for sanitary ware.

USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.

USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

USP-EAGLE (GP35-55) is an Unsaturated Polyester resin non pre-accelerated, thixotropic, very good adhesion to acrylic sheets, good wett-ability, and low viscosity.It is used in a spray, hand lay-up, glass fiber reinforced back lamination for sanitary ware.

Terratek® WC200140 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200140 contains 15% wood flour and with Braskem GreenPE this formulation is fully biobased.

NYCOTUFF 1595 HS Black B14 is a medium viscosity, impact toughened Nylon 6 based compound. It offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles.

Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing

USP-EAGLE (GP30-65) is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.

Terratek® WC200145 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200145 contains 30% wood flour and with Braskem GreenPE this formulation is fully biobased.