Fluids & Lubricants

NuSil™ MED-4162 is a silicone dispersion.

Greasil 9000 is a stiff water repellent non-melting silicone grease lubricant.

Lubrajel MG is a proprietary hydrojel formulation that was developed in the early 1970's as a non-drying, water-soluble lubricant for the medical industry. Lubrajel MG has been marketed since its development in 1973 as a medical lubricant. It has been used as a general and instrument lubricant for use during physical exams, and applied to catheters, thermometers and a host of other instruments to aid in use and patient comfort.

NuSil™ MED-361 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: DIMETHYL POLYMER.

Lubrajel RR is clear and colorless, and virtually odorless and remains so after sterilization by gamma radiation. An initial apparent viscosity of about 25,000 cps (Brookfield RVT or equivalent, spindle #7, 50 rpm, 22º C) exhibits practically no change upon irradiation. Temperature stressed stability studies indicate that pH, viscosity, color, clarity and lubricating qualities are not sacrificed.

NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.

NuSil™ MED-460 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: METHYL FLUORO COPOLYMER (HIGH FLUORO).

NuSil™ EPM-2410 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and SealantsComments: Ideal for Static Mix and Dispense Applications. Available in Black and White.

SILWA® TL 100 is water-free formulation of silicones, waxes and additives with antistatic properties.