Products in Base Coats & Undercoats

Domacryl 9948 is a reactive 2-pack methacrylate resin, hardened with dibenzoyl peroxide designed for flooring. The resin is suitable for mortar, self-leveling, smooth and broadcasted floor coatings. Features and BenefitsFlexible base coat for flooring systemsVery fast curing even at low temperaturesLow VOCApplication with trowels or rollers.

ME-565 broadband electrically conductive isolation coating is a carbon-based paint in a proprietary water based acrylic resin system. It provides broadband RFID area isolation across all RFID frequencies in a thin, easy to apply format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush, roller or sprayed on. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-565 acts as a ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

ME-505 broadband Electrical isolation coating is a coated carbon based paint in a proprietary urethane (solvent based) resin. It provides broadband RF isolation in a thin format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush or sprayer or screen printed. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-505 is a lossy ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

Vapor-Guard R5341B is a water-based coating designed for corrugated board liners and other paper-based substrates. It can be used for any packaging application that requires excellent water resistance, and a low rate of moisture vapor transmission (MVTR).

Kemperol® 022 is a two-component, high performance, cold-liquid applied, solvent-free, low VOC, crack-spanning resin for waterproofing beneath tile and stone applications.

ChemSystems Cemseal WB is a high quality pure acrylic water-based sealer designed to protect both interior and exterior concrete and masonry surfaces. CemSeal WB forms a tough water clear semi-gloss protective acrylic film that resists water, dirt and common day-to-day contamination at the same time eliminating concrete dusting. This product is a good choice for sealing all types of gray or colored concrete and masonry surfaces. It can be tinted using Helix water-based Tint Packs to achieve a translucent tinted sealer.

Colorfast™ strengthens the glue that binds the wood cells together, called lignin, preventing yellowing of the underlying wood cells to help maintain a consistent color year after year. Before staining, Colorfast™ evens out wood porosity, creating a smoother surface for stain application and preventing over-absorption and a too-dark color. After staining, the lignin stabilizers prevent the wood underneath from getting sunburned, leaving the stain applied on top looking the same year after year. Colorfast delivers the ideal canvas for stain application and leaves behind the strong foundation necessary for long-lasting color.

Kemperol® BRM is a two-component including catalyst, high performance seamless and self-terminating cold-liquid applied, reinforced unsaturated polyester membrane system for exterior applications.

KARNAK 405 Bond-N-Shield is a 100% elastomeric acrylic, co-polymer emulsion, specifically designed as a base coating that will provide excellent adhesion to asphalt surfaces. The coating contains stain blockers that prevent asphalt bleed through thus producing a brighter white coating over these surfaces. Technological advances in the KARNAK laboratory also give this acrylic coating improved water blistering resistance in temporary ponding areas versus traditional acrylic coatings.

BASECOAT color system offers solid color basecoat (pigmented), metallic and Pearlescent/special effect basecoat. Revvin base is used in combination with recommended Genteel Coatings clear coats to give durable, hard and gloss finish.

Geomet® 720 is a completely chrome-free, water-based coating passivated with zinc and aluminum flakes in a binder. This high-performance, low-film, functional zinc flake coating is designed to protect fasteners, stampings, and a variety of metallic hardware. Geomet® 720 is the preferred zinc flake coating widely used by Asian OEMs.

Red Spot Paint & Varnish Co. 364W is thermal cure monocoat with PP and Rigid TPO substrates.

Tech Line Coatings Black High Heat Base Coat (HHBK) is a metallic ceramic coating capable of providing extremely high levels of thermal protection in very thin films. When applied to exhaust systems HHBK will withstand substrate temperatures of over 2000°F. in addition direct flame will not cause delamination as long as substrate temperatures do not exceed this temperature. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

PREP COAT NCP, Non-cementitious Prep Coat, is formulated with a 100% styrene acrylic emulsion. It is a trowelapplied high performance coating for use as an optional base coat on the DuROCK PUCCS RMC and InsulROCK RMC Systems, as well as the DuROCK Exterior Finish Systems. NCP is a factory-mixed base coat that does not require the addition of water or Portland cement. NCP is normally used only as a base coat on combustible construction. However, on existing EIFS installations where it may be necessary to re-finish the system, NCP is recommended for skimming over-top of existing EIFS finish coats to level the surface prior to application of a new DuROCK Finish. NCP is a flexible and durable base coat that has greater flexibility than polymer based cement base coats, hence, it is ideal for areas where greater flexibility may be required. When used as a skim coat, it is intended to be applied very tight.

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

Red Spot Paint & Varnish Co. 192S is thermal cure basecoat with Noryl GTX and Nylon substrates.

OneTex 2000 has been formulated for use over interior plaster and drywall surfaces. The outstanding combination of pigments and resin has yielded excellent results on jobs where good scrub resistance and economy are of prime importance.

Red Spot Paint & Varnish Co. 460S is thermal cure monocoat with SMC substrate.

Kool Seal® Elastomeric Base Coat is a 100% acrylic roofing coating designed to provide maximum adhesion to all surfaces. Its ability to expand and contract with the roof provides long-lasting protection and provides an excellent surface for application of Kool Seal Elastomeric Finish Coats.

QuestMark Flooring High Build Epoxy Coating - CM3707 is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. Recommended for a high build topcoat or basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.

PREP COAT D is dry polymer based dry-mix material that is field-mixed with water. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat D is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site. This is a non combustible material.

Geomet® 430 is a black appearance basecoat applied to protect fasteners and various types of metallic parts from corrosion. Geomet 430 is always combined with nof metal coatings group black topcoats (plus or P-series) to provide a very broad range of friction coefficients. This new black-on-black system with geomet 430 will enhance cosmetic appearance even after mechanical damage and automatic sorting.

Automotive International VG-160 Military Spec Solvent Undercoating is a high performance solvent-based wax-based coating for inner body panels and/or the underside of automotive vehicles, bus bodies, motor homes, and other similar structures. It provides a waxy flexible and abrasion-resistant coating for superior corrosion protection against moisture, salt, alkalis, and galvanic reaction.

PREP COAT Q is a fast drying, dry polymer based dry-mix material that is field-mixed with water. It is ideal for use in cold temperature, high humidity conditions. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat Q is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.

PREP COAT PLUS is 100% styrene acrylic emulsion that is field-mixed with Portland cement. It is a trowel-applied high performance coating for use on DuROCK PUCCS RMC and InsulROCK RMC Systems as a base coat and adhesive with enhanced flexibility and strength. Prep Coat Plus is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, and breathable to water vapor. Prep Coat Plus can be applied as a high-build leveling coat, for added impact resistance on EIFS or to make a wall plumb and flat, applied up to 6.4 mm (¼ inch) thick in a single pass if required.

Tique Ground Coat is an elastomeric weather resistive air barrier, adhesive and base coat combined with Portland Cement. Tique Ground Coat is used in the Tique Continuous Insulation Systems, as well as in the direct applied application on vertical wall assemblies. It is a two component product.

Coelan® Balcony Base is a moisture cured basecoat used as the intermediate and aggregate bonding layer for use in the balcony coating systems.

406 Tru-Grip is a 100% acrylic elastomeric co-polymer emulsion, specifically designed as a base coating for adhesion to weathered TPO, Hypalon, and PVC roofing membranes. When applied to a suitably cleaned, weathered TPO or PVC roof and top coated with a durable acrylic elastomeric topcoat such as 535 QS Enviro-Lastic, 505HS Mohave Coat, 501 Elasto-Brite or 529 Renu-White, the basecoat can extend the life of the existing roof membrane. The technology used in 406 Tru-Grip enables the coating to have very good adhesion and resistance to blistering when applied to weathered TPO and PVC.

ERS-Ecothane Basecoat is a coating system made up of high solids, moisture-catalyzed, single component, polyurethane components. The system consists of ERS-Ecothane Basecoat (an aromatic polyurethane) and ERS-Ecothane Topcoat, a UV-resistant, 100% aliphatic polyurethane. This combination provides an excellent balance of tensile strength, elongation and hardness, resulting in long term flexibility and impact resistance. High abrasion resistance results in protection from maintenance traffic and severe weather conditions. Non-migrating fire retardant chemicals are permanently locked into the coating, ensuring long-term fire retardance. The ERS-Ecothane System is a permanently flexible “breathing” membrane, allowing moisture vapor from within the substrate or building interior to escape though the coating, while remaining impervious to mass water penetration from the exterior. The ERS-Ecothane products are single-component elastomers, which are catalyzed through exposure to moisture in the air. They are designed for application through standard airless spray equipment, as well as by brush or roller.

EP 600 Series is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed.

Geomet® 360 has been specifically formulated to protect brake disks against corrosion. Applied from a chrome-free, water-based dispersion system of zinc and aluminum flakes, the surface of the brake disk can be treated with a thin layer of coating and still provide a high-performance level without any influence on normal braking characteristics.

Red Spot Paint & Varnish Co. 206LE is thermal cure basecoat with ABS, PC/ABS, PC/PBT, Primed TPO, PVC and Xenoy substrates.

Foam-kote is a cement, silica sand and 100% acrylic polymer based material that is used as an EPS insulation board adhesive and / or a base coat.

DISSCO® 511 Paint Base is a thin non-fibered asphalt base compound designed to be used in the manufacture of asphalt base pigmented paints. It is manufactured from the highest quality industrial grade blown asphalt and mineral spirits available to produce the best paints possible. It is made with slow drying solvents that enable the pigments to have more time to leaf out, therefore producing a brighter paint. It will produce a tough but pliable coating therefore producing a product that will last several years.