Products in Fluids & Lubricants: Polyglycols

PROGILINE® Gear 680 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

PROGILINE® Gear 460 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

ZEROL® PAG 150 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 150 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.

PROGILINE® Gear 320 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

ZEROL® PAG 100 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 100 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.

PROGILINE® Gear 1000 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

PROGILINE® Gear 220 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

PROGILINE® Gear 68 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

PROGILINE® Gear 150 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

ZEROL® PAG 46 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 46 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.

JEFFCOOL® P150 is an inhibited propylene glycols used as industrial coolants and heat transfer agents.

Duratherm G is a polyalkylene glycol based fluids such as UCON 500® are a widely used form of heat transfer fluid that until now offered only average performance, short fluid life and have not been compatible with most other types of heat transfer fluids. Duratherm G’s exclusive additive system now allows for its successful use in high demand applications like those found in the plastic industry, die casting and even performs and lasts exceptionally well in open baths.

Quechem SGL-100G Synthetic Lubricant is a 100% Synthetic lubricant that will outperform any petroleum base product known on the market today because it has a flat viscosity curve versus temperature. The polymer based blend has been designed in such a way to take high loads and high and low temperatures without losing it’s film strength. It consists of polyalkyleneglycol (PAG) base stock which has been blended to produce a high performance synthetic lubricant. These lubricants are used in variety of applications and offer better performance at low and high operating temperatures.

ACEMIRE® AUTO HFO is a premium polyalkylene glycol synthetic oil. For air system use conditioning, this is the option for the new gas R-1234yf, for lubrication in air compressors automotive conditioning. Acemire Auto HFO ISO 46 is a non-flammable polyalkylene glycol-based lubricant. Formulated and designed to be applied with HFO 1234yf refrigerant in air conditioning systems. Acemire Auto HFO ISO 46 is not capable of working with other existing refrigerants.

Quechem SGL-100 Synthetic Lubricant is a 100% Synthetic lubricant that will outperform any petroleum base product known on the market today because it has a flat viscosity curve versus temperature. The polymer based blend has been designed in such a way to take high loads and high and low temperatures without losing it’s film strength. It consists of polyalkyleneglycol (PAG) base stock which has been blended to produce a high performance synthetic lubricant. These lubricants are used in variety of applications and offer better performance at low and high operating temperatures.

WearMaster® KF 102 is a high temperature, synthetic-based fluid compounded for chain and conveyor lubrication where ambient temperatures can cause severe and premature lubricant failure and conveyor chain wear.

Dynalene EG-XT is a high-temperature inhibited ethylene glycol. Dynalene ethylene glycol (EG), also known as monoethylene glycol (MEG) or 1,2-ethanediol, is a naturally colorless, odorless, slightly viscous fluid that is miscible in water. Dynalene ethylene glycol products include both inhibited and uninhibited solutions. Dynalene glycols are blended with specially formulated additive packages depending on your system specifications.

Shamrock Chicago Corp Rockfrost HD Heat Transfer Fluid is a formulation of propylene glycol and a specially designed package of industrial corrosion inhibitors. The fluid is dyed for leak detection purposes (yellow is standard). Rockfrost is preferred for use where low toxicity is desired.

Quechem SPG 300 Synthetic Lubricant consists of polyethylene Glycol base stock which has been blended to produce a high performance synthetic lubricant. This lubricant is used in variety of applications and offer better performance at low and high operating temperatures. SPG 200 Synthetic Lubricant is clear, odorless and viscous liquid. They are heat stable and hygroscopic with a low vapor pressure.

RECOFREEZE AL® 50/50 is a premixed, ready to use, pH neutral heat transfer fluid specifically designed for use in aluminum boiler and heat exchanger systems. It is especially suited to combat acidic corrosion of aluminum and other system metals utilizing a proprietary combination of corrosion inhibitors in a blend of virgin propylene glycol and high quality de-ionized water. The additive system used is free of amine, borate, nitrate, nitrite, phosphate or silicate and formulated to provide corrosion protection to copper, solder, brass, steel, cast iron and aluminum components.

Dynalene TEG (High-Temperature, Inhibited Triethylene Glycol Heat Transfer Fluid). Dynalene TEG is an inhibited triethylene glycol heat transfer fluid offered in pre-mixed solutions up to 60%. Dynalene TEG offers users a stable, safe, and efficient product for applications where freeze protection is needed. It has a much higher thermal stability than propylene and ethylene glycol and can safely be used up to 204°C (400°F). Properly used and maintained, Dynalene TEG offers excellent thermophysical heat transfer properties all while protecting your system from corrosion and degradation for years.

Dynalene PG-XT is an Inhibited propylene glycol.Propylene glycol (PG), also known as monopropylene glycol or 1,2-propanediol, is a colorless, odorless, slightly viscous fluid that is miscible in water. Dynalene propylene glycol products are comprised of inhibited and uninhibited non-toxic propylene glycol solutions from <10% PG to up to 100% PG. Dynalene also offers raw or inhibited USP (United States Pharmacopeias) food grade propylene glycol (with purity greater than 99.8%) depending on your application.

JEFFCOOL® P200 is an inhibited propylene glycols used as industrial coolants and heat transfer agents. JEFFCOOL P200 coolant is used where accidental contact with food is possible and toxicological properties must be considered.

Dynalene LC-PG (propylene glycol-based) is specially designed for cooling PEM fuel cells, electronics, computers, and other applications requiring low electrical conductivity coolants. It provides efficient heat transfer that prevents your system from overheating while simultaneously acting as an electrical insulator. LC products use a non-ionic corrosion inhibitor package that prevents corrosion and contaminants from degrading your system.

Quechem SPG 200 Synthetic Lubricant consists of polyethylene Glycol base stock which has been blended to produce a high performance synthetic lubricant. This lubricant is used in variety of applications and offer better performance at low and high operating temperatures. SPG 200 Synthetic Lubricant is clear, odorless and viscous liquid. They are heat stable and hygroscopic with a low vapor pressure.

GEO-FLO™ SAFE includes a specially formulated inhibitor package to help prevent corrosion and extend the life of the fluid, promoting long-term Geothermal system operation. It meets ASTM D1384 corrosion protection performance requirements and as a PG based fluid, GEO-FLO™ SAFE is compatible with all materials in geothermal installation including plastic pipes and metal components. Since it is propylene glycol based, GEO-FLO™ SAFE is nonflammable, resulting in improved safety, both for system installation and operation compared to alcohol-based fluids. s GEO-FLOTM SAFE, a premium propylene glycol based geothermal heat transfer fluid designed for use in all residential geothermal installation systems.

Lubriplate® Bio-Synxtreme HF-32 ISO Grade 32, Polyalkylene Glycol (PAG)-Based Synthetic oil is high performance hydraulic fluid designed for demanding industrial and marine (Vessel General Permit) applications requiring environmental sensitivity, water solubility, fire resistance, and excellent anti-wear properties over wide temperature ranges.

Caldera 6 is a high-quality, PAG Heat Transfer Fluid used in open bath systems. The formulation is highly resistant to oxidative degradation resulting from exposure to the atmosphere. Caldera 6’s proprietary formulation is more oxidatively stable than other glycol-based heat transfer fluids, and provides hours of trouble-free service, even in the most demanding applications.

GEO-FLO™ ALL includes a specially formulated inhibitor package to help prevent Geothermal unit corrosion and fluid degradation, key aspects in maintaining efficiency and extending system operation. As an ethanol based fluid, GEO-FLO™ ALL is a competitive heat transfer fluid for the geothermal installation market.

RECOFREEZE PG® contains specially formulated inhibitor packages to help prevent corrosion and extend the life of the fluid. Propylene glycol based heat transfer fluids are commonly used in applications where low acute oral toxicity is a requirement or when a potential exists for contact with food or potable water. All RECOFREEZE PG® heat transfer fluids come in concentrate or pre-diluted solutions, are biodegradable and will not concentrate in water systems.