Products in Composite Materials: Molding Compound

Polynt Group HUP 10/25 RN-Color is generally used in electronic and electrical, foundries, peroxides applications.

Polynt Group BMC RF 9/35 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties and good fire protection grade are combined into the BMC RF 9/35. BMC RF 9/35 is certified V0 3,0 mm by UL laboratories. BMC RF 9/35 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC RF 9/20 UNI CEI is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for railway electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 9/20. BMC RF 9/20 complies with uni cei 11170-3. BMC RF 9/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 17/18 RN-5001-PL is generally used in electronic and electrical applications.

Quantum Composites QC-2150LD is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.

Brandonite® 1511-80D contains features such as Outstanding lubricity and wear resistance.

Polynt Group BMC S 1850 RF Structural is a bulk molding compound based on a blend of different thermoset resins, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC S 1850 rf. BMC S 1850 RF is certified V0 3,0 mm by UL laboratories. BMC S 1850 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Toray Toray Cetex® MC1100 PPS is a thermoplastic bulk molding compound (BMC) based upon Toray Cetex® TC1100 PPS thermoplastic uni-directional tape. Toray Cetex® MC1100 PPS is offered on standard-modulus fibers in lengths of up to 25.4 mm (1”). Intermediate-modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. Many composite compression molded parts are used to replace metal parts for weight savings or replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1100-4A, PPS, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Polynt Group HUP 22/50 RB-Color is generally used in industrial sector applications.

Polynt Group HUP 13/35 RN Color is generally used in building and construction, cosmetics, foundries, peroxides, railway sector applications.

Polynt Group SMC 3381 RF UNI CEI is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC 3381 RF joint good mechanical properties and good fire protection grade. SMC 3381 RF complies with uni cei 11170-3. SMC 3381 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Resinoid Compound 1322 is a glass reinforced, two step molding compound. It may be preformed. Recommended for transfer, injection or compression molding

Polynt Group HUP 12/30 LE RB-9500 is generally used in automotive, foundries, mass transports, peroxides, railway sector applications.

Voltoid® D-100 is an economical electrical and flame barrier, including Underwriters Laboratories’ flame class rating of 94 V-0. D-100 is recommended for applications where long exposure to high humidity is not anticipated. It is a versatile material which can be riveted, stitched, stapled, and formed.

menzolit® BMC 1400 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

Resinoid 1528 is a glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated for use in automotive applications. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment

Quantum Composites QC-2550 is a chopped E-glass fiber reinforced ESC® molding compound. It exhibits outstanding low flammability characteristics. It is recommended for applications such as aircraft interiors and public transportation components requiring composite materials having very low flammability, low smoke, and minimal generation of toxic gasses.

menzolit® BMC 0300 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Resinoid 1382 is a glass reinforced, two-step phenolic molding compound formulated for applications requiring exceptional tensile strength. It has been used to replace cast aluminum in certain applications. Resinoid 1382 exhibits excellent dimensional stability, electrical and thermal properties. It is supplied in pelletized form for use in injection, transfer, and compression molding. It can be preformed on automatic equipment.

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

Polynt Group BMC RF 9/25 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 9/25. BMC RF 9/25 is certified V0 3,0 mm by UL laboratories. BMC RF 9/25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 25/35 RB-Color is generally used in cosmetics applications.

Polynt Group SMC LS 3300 R25 RF is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC LS 3300 R25 RF joint good mechanical properties and good fire protection grade. SMC LS 3300 R25 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

UDCarbon® 24CF60-12K is generally used in automotive, industrial sector, leisure and clothing applications.

Polynt Group CBC-7000MR is generally used in electronic and electrical applications.

Polynt Group SMC LPMC 7000 LP is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7000 LP is studied to be molded at low pressure. This SMC has been developed for structural parts SMC LPMC 7000 LP joint good mechanical properties and good varnish adhesion. SMC LPMC 7000 LP is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC 700-23 VE C is a bulk molding compound based on vinylester resin and reinforced with glass fibers. BMC 700-23 VE C joint good mechanical properties and high chemical resistance. This BMC has been developed for application where is requested anti-static protection. BMC 700-23 VE C is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group BMC 1150 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

menzolit® BMC 1100 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Polynt Group SMC SF 12/25 RN-1090 is generally used in automotive, foundries, peroxides applications.

Mar-Bal MB2000-10 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

menzolit® BMC 0800 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Polynt Group HUP 90366/27 RN-Color is generally used in home and domestic applications applications.