Products in Functional Additives

BactiBlock® 920 B0 is an antimicrobial additive suitable to be used in a broad variety of materials by compounding such as polyolefins and other polymers.

Conductive Silver Spheres (CHS) are highly conductive, low density, spherical powders and particles with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight. The CHS additives are noticeably lighter than solid silver in paints, Composites and adhesive, while providing excellent conductivity, the low particle density of the CSGS and large surface area facilitates slow phase separation in paints and adhesives compared to heavy metallic and organic fillers. The CHS also works well when used as catalysts, laser fusion targets, and electrically conducting bond line spacers in advanced electronics and other applications. The CHS additives are engineered for high conductivity and shielding electromagnetic interference while improving the applications impact strength. The spheres can be customized from size to silver % to fit the application.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers a superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

SR3604-35 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Aminoethylaminopropyltrimethoxysilane (technical grade). Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Silicone-free, rapid air release agent for use with a wide variety of unsaturated polyester and vinyl ester resins.

Nanjing Union Silicon Chemical Amino Silane USi-D1301 appears as colorless transparent liquid.

SR3602-35W is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

AL 160 is a bifunctional organosilane with a reactive epoxide and inorganic methoxysilyl groups that promote adhesion by the ability to chemically bind to inorganic materials and organic polymers.

Coupling agent in filled polymer systems, which cure via free radical mechanisms, copolymerization or grafting and as a surface modifier. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

BactiBlock® 920 B4 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

OPTIM® E-152 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.

AL180 is a water-white to light straw liquid. It is a mercapto-functional silane that finds use as a coupling agent in polysulfide and polyurethane caulks and sealants.

USI Chemical Silane USi-402, as a co-monomer in polymers, can improve wet scrub resistance and abrasion resistance thanks to crosslinking and better adhesion to the substrate.

Progressive Fillers International offers a solution to the industrial standard dark color of conductive and anti-state applications by offering a radiant shine to conductive additives, the CSL lines are conductive synthetic flakes with an adjustable specific gravity and density to fit the project. Having full control designing the weight, dimensions and over all parameters of the flake gives the customer full control over their original design and cost.

Epoxy functional silane used as a coupling agent for unsaturated polyester-fiberglass composites, and for polysulfide/polyurethane caulks & sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

USI Chemical Silane USi-2301 improves both adhesion to the substrate and mechanical properties such as flexural strength, tensile strength and modulus of elasticity.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

Nanjing Union Silicon Chemical Vinyl Silane USi-401 appears as colorless transparent liquid.

IsoCoat 401 is an aqueous aromatic polyamide- imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact. MicroFLON 1437FG is designed for food contact applications. These applications include: food processing, machine parts, and medical devices.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

USI Chemical Silane USi-3301, as a coupling agent in glass fiber-reinforced or filler-modified plastics improves filler dispersibility while reducing the filler's sedimentation tendency.

USI Chemical Silane USi-1301 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties - such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. USi-1301 also greatly increases water (vapor) and corrosion resistance.

Conductive Silver Spheres (CHS) are highly conductive, low density, spherical powders and particles with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight. The CHS additives are noticeably lighter than solid silver in paints, Composites and adhesive, while providing excellent conductivity, the low particle density of the CSGS and large surface area facilitates slow phase separation in paints and adhesives compared to heavy metallic and organic fillers. The CHS also works well when used as catalysts, laser fusion targets, and electrically conducting bond line spacers in advanced electronics and other applications. The CHS additives are engineered for high conductivity and shielding electromagnetic interference while improving the applications impact strength. The spheres can be customized from size to silver % to fit the application.

Aminopropyltriethoxysilane. Maximizes the physical and electrical properties thermoset and thermoplastic composites. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

OPTIM® E-118 is a maleic anhydride modified linear low-density polyethylene. It has been designed to promote adhesion between carrier polymer and high loading of mineral fillers in HFFR cable compounds. Without this coupling agent, it is not possible to achieve the required mechanical properties in the cable compound.

BactiBlock® 101 R4.47 is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.