Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Most effective general purpose silicone-free air release
- agent for UPR and vinyl ester based composites
- Demonstrated equivalent air release results in
- comparative applications testing with a wide range of
- UPR resins using the recommended dosage
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Composites End Use
- Plastics & Elastomers End Uses
- Applications
- Cast polymer
- Gel coat
- Coatings
- Marine
- Marine Laminate
- Tubs & showers
- Dosage
- For optimum performance, mix Borchi® A-111 EU into resin before the addition of other formulation components. This process prevents bubble formation during compounding and application processes. 0.1 – 0.5 % additive by weight (as supplied) based on total formulation.
Properties
- Physical Form
- Appearance
- Yellow liquid
- Physical Properties
Value Units Test Method / Conditions Color (APHA) max. 250 - ISO 6271 Density (at 25°C) 0.860 - 0.900 g/cm³ DIN 51757 (A) Non-volatile Content (0.4g, 10min at 150°C) 36.00 - 40.00 % ASTM D 1644 B Refractive Index (at 25°C) 1.5000 - 1.5140 - DIN 51423 Solvent(s) Aromatic petroleum solvent - - Turbidity max. 10.0 NTU DIN EN ISO 7027 - Media
- Solvent-based
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety
Packaging & Availability
- Country Availability
- Regional Availability
- Availability
- Americas, Asia, EMEA
Storage & Handling
- Storage
- Please consult Borchi® A-111 EU product label for storage and handling instructions. Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. Store in tightly closed container. Store in a well-ventilated place. Keep in an area equipped with sprinklers. Store away from incompatible materials (see Section 10 of the SDS).