Products in Monomers & Oligomers: Resins

Guangzhou Flying Dragon Chemical Ltd. Vinyl Acetate is a special material that has been widely used in the production of a series of chemicals such as polyvinyl acetate emulsion (PVAc), polyvinyl alcohol, vinyl acetate ethylene (VAE) emulsion, vinyl copolymer resins, acetal resins, etc.

BR-542MB is a difunctional, aliphatic polyether urethane methacrylate. BR-542MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. As a primary oligomer, BR-542MB offers excellent properties of adhesion and optical clarity. As a co-oligomer, BR-542MB can be used to improve an existing formulation's glass adhesion.

BR-741D is a low-molecular—weight, difunctional, aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to cold rolled steel, glass, PMMA, PET, PC, and stainless steel. The resulting hard and tough film makes an effective protective glossy coating which will be nonyellowing, abrasion resistant, and have good weatherability. This is the low-viscosity version of BR-741.

Tack-free gel polish top coats are highly desired in the nail coating industry because they provide a durable, high-gloss finish to a manicure without an IPA wipe step. Removing this step from the process saves time and allows the coating to exhibit its natural gloss. Like all nail coatings, tack-free top coats require a gloss finish, superior hardness, and most importantly, low yellowing properties. Bomar has developed a model formula using a new oligomer which provides exceptionally low colop in a tack-free top coat. The model formula requires this new oligomer, a trifunctional methacrylate monomer, a difunctional methacrylate monomer, and photoinitiatop. The formula performed exceptionally well when compared to competitor top coats in areas of yellowness, viscosity, and hardness.

BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device.

Methacrylic anhydride is a reactive monomer used for the preparation of different type of monomers under mild reaction conditions. It finds applications in light-curing coatings, cross-linked materials like synthetic resin. It acts as an intermediate for the preparation of fibers, resins and pharmaceuticals.

BR-146, a high molecular weight, trifunctional, aliphatic polyether urethane methacrylate, provides low formulation viscosity and moderate elongation with nonyellowing properties appropriate to soft touch glass coatings and impact resistant coatings. BR-146 shows adhesion to a variety of substrates, making it a candidate for consideration in mixed surface adhesion applications.

BR-990S2 is a dual-functional urethane acrylate with isocyanate functional groups. While products formulated with BR-990S2 can be cured with a UV light source, a free isocyanate can also react with ambient moisture to complete the curing process. This UV+moisture curing process will benefit applications where shadow areas are present. BR—990S2 can also be used as a component in a 2K UV+Heat curable product, the other component being a polyol, glycol, or other compound with OH functional groups. A diol, or compound with two OH groups, will exhibit the best properties because it enables chain growth rather than chain termination. BR-990S2 exhibits good flexibility and develops good tensile strength when cured using both UV light and moisture. More flexible products can also be formulated with BR-990S2, different polyols, and UV+heat curing processes.

MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate [UDMA], BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resistivity. When compared to FDM-printed ESD parts, ESD resins produced with MechT E35A can achieve fully isotropic conductivity with high resolution and isotropic mechanical properties.

Styrene is the most used name of phenylethene, an organic compound and has the chemical formula C8H8.

BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of biobased content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balnce of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality and tin-free nature make this an excellent choice for consumer applications with low irritancy.

BR-581MT is an oligomer blend that provides a low color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating for nail applications, please see our sell sheet for a starting point formula.

BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact resistant coatings, and provides low color and excellent non-yellowing performance.

BR-582 is a 2.4 average functional aliphatic polyether urethane acrylate. As with other BR-500 series materials, BR-582 is designed to offer a balance of benefits between toughness and flexibility. While only slightly lower in tensile strength and hardness than BR-571, BR-582 has almost double the total elongation at break. BR-582 responds quickly to UV cure, owing to its elevated functionality.

BRC-842MB is a difunctional, hydrophobic urethane methacrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. Its ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications.

BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing.

BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. Ifs ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications.

CA - 2520 is Applied In PU Resins, Elastomer.

Proman Melamine is a constant presence in our everyday lives. All sorts of household items, from kitchen surfaces and dinnerware to cooking utensils and flooring, owe their durability and heat-resistance to melamine’s binding properties.

Swisloyd First Special Grade SL-CO-FSG is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, ricinus communis, is not a member of the bean family.

ELAPOL 4010 A is a linear, saturated polyester polyol by Elachem. It contains aliphatic acid & diethylene glycol (DEG).

ELAPOL 6520 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

ELAPOL 5520 A by Elachem is an aliphatic, saturated polyester polyol. It contains 1,4-butanediol and mono-ethylene glycol (BDO,MEG).

CA - 2410 is Applied In Adhesives, PU Resins,Elastomer, PU Elastomer Fiber.

NIPPOLLAN N-965 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Prasol Chemicals ETHYLENEDIAMINE is used to manufacture chelating agents like EDTA.

ELAPOL 11110 B by Elachem is a linear, saturated polyester polyol. It is manufactured with synthetic aromatic , aliphatic acid and diethylene glycol (DEG​).

Merginol 901 is a branched Polyester/-etherpolyol. It is free of aromatics.

Merginol 207 is a polyol based on vegetable oil with primary and secondary hydroxyl groups. The renewable content is very high.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

ELAPOL 10020 A is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and 1,6-hexanediol.

bossin® W-30 has a high elastic and low temperature flexibility with carboxyl react, with hardener of amino resin and polyurethane resin. The crosslinking reaction is very well, form a toughness and elastic film.

CA - 4010 is Applied In Adhesives, PU Resins, Paints Coating, Elastomer, PU Elastomer Fiber.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Swisloyd Dehydrated Castor Oil SL-DCO is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.