Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Base Chemicals Features
- CASE Ingredients Features
- Features
- Very excellent optical clarity
- Extremely high tensile strength
- Exhibits hydrolytic stability
- Non-yellowing
- Good impact resistance
- Provides weatherability
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- High-impact 3D printing resins
- Tough adhesive applications
- Optically clear coatings
- Impact resistant coatings
- Provides good impact resistance and weatherability
- Exhibits hydrolytic stability
- High tensile strength
- Excellent optical clarity
Properties
- Typical Properties
Value Units Test Method / Conditions Density (at 25°C) 1.08 g/cm3 - Durometer Hardness 84D - - Elongation at Break 7.5 % - Nominal Viscosity (at 60°) 4000 cP - Nominal Viscosity (at 25°C) 5100 cP - Refractive Index (at 25°C) 1.49 - - Tensile at Break 35 MPa - Glass Transition Temperature (DMA) 98 °C - Viscosity (at 60°C) 4000 cP -
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 5,100 7,500 6,700 4,500 6,200 3,000 Elongation, %** 8 5 3.5 4.9 6.7 25 Elastic Modulus, ksi* 220 300 290 180 210 130 Durometer Hardness 84D 850 890 83D 830 850 Water Absorption, % (24 hrs) 0.28 0.17 0.34 0.39 0.25 1.35 MEK Double Rubs (#) 94 22 >200 100 >200 60 Tg(DMA)=98°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS *** *** Aluminum Cold Rolled Steel
Glass HDPE PET * * ** ** ** *** PMMA ** * * Polycarbonate * ** *** *** *** Polypropylene PVC * * ** ** Stainless Steel * Recommended ** Highly Recommended *** Strongly Recommended
- Typical Formulations
Test Formulation Name I30 I60 TM50 TP50 H50 HE30 BR-146 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HODA 50 HEMA 30 Omniradw 184 2 2 2 2 2 2 Viscosity, 25C 5,100 600 3,600 600 240 1,400 * Brookfield – CAP 2000+ @ 25°C.
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type