Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Base Chemicals Features
- CASE Ingredients Features
- Features
- Tin free
- High biobased content
- Good impact resistance
- Low skin sensitivity
- High tensile strength
- Relatively low color (<50 APHA)
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Base Chemicals End Uses
- Coating Type
- Applications
- Biobased nail coating top coats
- Tough 3D printing resins
- High biobased content
- Tin free
- Relatively low color
- Good impact resistance
- Low skin sensitivity
- High tensile strength
- Good balance of toughness and flexibility
Properties
- Typical Properties
Value Units Test Method / Conditions Density (at 25°C) 1.1 g/cm3 - Durometer Hardness 80D - - Elongation at Break 35 % - Nominal Viscosity (at 60°C) 8900 cP - Nominal Viscosity (at 25°C) 8900 cP - Refractive Index (at 25°C) 1.49 - - Tensile at Break 23 MPa - Glass Transition Temperature (DMA) 89 °C - Viscosity (at 60°C) 8900 cP -
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cured Mechanical Properties
Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi** 3,300 5,000 7,300 4,200 5.7 3,100 Elongation, 6** 35 20 2.9 6.3 6.9 40 Elastic Modulus, ksi* 160 270 360 170 200 130 Durometer Hardness 80D 850 89D 80D 830 820 Water Absorption, 96 (24 hrs) 0.47 0.27 0.48 0.63 0.4 2.32 MEK Double Rubs (#) 186 26 >200 129 >200 37 Tg(DMA)=89°C; Peak tan delta; cured with 2 phr of Omnirad® 184 ** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Typical Formulations
Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 8,900 1,100 5,500 1,000 400 2.7 * Brookfield – CAP 2000+ @ 25°C.
- Adhesion Properties
Substrate I30 I50 TM50 TP50 H50 HE30 ABS *** ** Aluminum Cold Rolled Steel
Glass * HDPE PET * *** ** *** *** PMMA *** * * Polycarbonate * *** *** *** Polypropylene PVC Stainless Steel *Recommended ** Highly Recommended *** Strongly Recommended
- Viscosity Reduction with Reactive Diluents
Safety & Health
- Safety
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes.
For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.
Packaging & Availability
- Packaging Type