Products in Other Electrical & Electronics Applications

NIRETAN B 30 N is regionally available in Europe.

PALDUR® R 15 GF30 FR 0 is a Injection Molding.is a Flame retardant. it is General Chemical Resistance.

Light Diffusers are used in plastic applications requiring high light output and dramatically increased light transmission, compared to standard sign whites.

NIRETAN B EXL is delivered in Natural color form.

Disheng Technology Ultraviolet absorber UV-1577 is suitable for polyetheramine, polybutylene terephthalate, polycarbonate, polyetherester, polymethyl methacrylate, acrylic copolymer, polyamide, polystyrene, styrene-acrylonitrile resin and polyolefin etc.

Potassium sulphite solution is a The use of sulfur chemicals in industry is subject to strict conditions. This serves for product safety and requires an interlinking manufacturing process on the part of the producer. Potassium sulfite solution from TIB Chemicals is used in particular for photo chemicals such as developer solutions, but also as a reducing agent in water treatment or as a food additive. The product is versatile and can be used for wine production

Karntner Montanindustrie Wollastonite LAR 325# is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

PA66 glass fiber reinforced Impact modified

ROTEC® ASA T 115/04 is ASA, extrusion and injection molding grade, high-impact, good weather resistance, high heat resistance.

Stellarchem AB845EM TPE Compound is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material. AB845EM is specially used for bonding with ABS, PETG, PC/ABS, PC, etc.

PEROXAN PB M-20 is tert-Butyl peroxybenzoate 75%, Solution in promotor.PEROXAN PB M-20 is used for the curing of unsaturated polyester resins.

CLR1157 is a heat cure, low stress, extremely tough, epoxy casting compound. The product was specifically designed for casting electrical motors. the cured material exhibits excellent thermal stability and thermal cycling characteristics.

TEP is a additive flame retardant. Use as fire‐retardant,strength agent of rubber,plastic and the material of pesticides,aging and steady agent of resin.

Disheng Technology UV absorber UV-360 is a high-efficiency ultraviolet absorber that can absorb 300-400nm ultraviolet rays and is widely compatible with a variety of resins.

Vibrant Colortech Black VB 9010-S is based on PE, PP, ABS, EVA and other base polymers. The product range comprises specially selected carbon blacks for high jetness, food contact approval and for better dispersion.

Navajo Brand® ½ pumice products are available in particle size distributions ranging from 6-mesh to 5 microns. Their high brightness, purity, and low specific gravity offer formulators unique opportunities for superior performance.

KEBABLEND / TC FE 191604 PA66 is a functionalized compound based on PA 66 with high thermal conductivity. Electrically insulating, good value for money.

PERGAPROP BIB-10 PP-EG is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 10%, Granules with Polypropylen.PERGAPROP BIB-10 PP-EG is used for the production of controlled rheology polypropylene (CR-PP).

Weifang Jahwa Chemical Decabromodiphenyl Oxide (FR-DBDPO) First Grade is an additive flame retardant with high bromine content and fine thermal stability,it can be used widely for Rubber,Textile,Electronics and Plastic industry,especially suitable for ABS,PA,PBT,PC,PE,etc and other synthetic materials.

SIROPOL 7130 resin is a high viscosity, non­promoted, chemical and water resistant, Neopentyl Glycol Isophthalic Resin.

Polifil® M series compounds are homopolymer polypropylene resins reinforced with mica. They combine an improved range of high-stiffness values with low mold shrinkage.

Eracure L is a high performance curative that can be used to cure TDI based prepolymers. It provides significant improvements in dynamic and high temperature properties compared with commercially available systems. It provides improvement in dynamic performance, increased service temperature of elastomers by at least 25°C, increased abrasion resistance, improved resilience, low toxicity and it imparts transparent qualities.

AMAPLAST® Yellow Y Solvent Yellow 33i is ABS and PMMA.

Lindride 52 consists of a group of anhydrides based on 4-methylhexahydrophthalic anhydride.

Pau Tai Industrial Lead stearate has excellent lubricant and good heat Stability.

Champion Tape S1017 has a 1 mil polyester and a high ack silicone adhesive.

Neelanjana Polymers Yellow Pigments provides a very pleasing color that is evoked by the light stimulating both the long (L) and medium (M) wavelength cone cells of the retina. Though it equally stimulates the L and M cone cells, it does not stimulates the S (short-wavelength) cone cells of the retina. The wavelength of the Yellow light is 570–580 nm, which is suitable mixture of green and red.

CompaDur® 121 natural (001) is a PBT, injection molding grade, non-reinforced, high viscosity, easy release.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Grupo Repol B1S25 G35 is 35% Glass Reinforced Nylon 6.

Air Atomized Copper is copper and copper alloy powders produced by disintegration of a stream of liquid metal through an atomizing nozzle by compressed air. This gas atomization process produces a spherical particle shape for copper and depending on the other elements, a spherical or irregular shape for alloyed powders.

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

Guangzhou Hoten Chemical Barium Sulfate Modified HTM-A is a high precision innovative function filler of nanometer class, HTM is specially developed for electronic printing ink and writing ink industry. The use of complete and uniform film coating technology enables it to have highly efficient pigment dispersibility and to fully retain each pigment crystal grain around it and well distribute in resin and solvent so that the intrinsic hiding power and optical performance of each pigment crystal grain may be maximized to exhibit a purer color image and vividness. HTM further reduces its oil absorption by complete film coating treatment, thereby reducing the resign and solvent consumption in formulas. As a result, a better quick drying property is achieved and volatility be reduced.

BARLOG plastics GmbH Kebablend® / MW FE 161001 PPS is a development product based on PPS for the production of soft magnetic components. The achievable permeability is approx. 10 (at 1MHz).

E-SPHERES® SL500 are Coarse Grade White Hollow Ceramic Microspheres.