Products in Consumer Goods: Industrial Applications

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Aegis® MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H60ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials1 while providing the same top performance and processability as Aegis® PIR-H60ZI, its standard, non-recycled counterpart. Aegis® PIR-H60ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for compounding, filament and carpet fiber applications.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Dianhydrides & Imides BISDA (4,4-bisphenol A dianhydride, dianhydrides of BPA) are flakes that can serve as a comonomer in polyimide synthesis or as an anhydride curing agent in epoxy applications. When utilized as an epoxy curative, it can enhance thermal performance compared to monoanhydrides and aromatic amine curing agents. Its application areas include electronics encapsulation, composites, and adhesives. Dianhydrides & Imides BISDA-derived polyimide varnishes, coatings, adhesives, films, and wire enamels offer desired solubility and stability in organic solvents even after complete imidization, heat resistance, flexibility/softness, dimensional stability, and adhesion properties for the ever-increasing design complexity of electronic devices. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LEXAN JK2500 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant.

SABIC's Specialties Business LNP™ STAT-KON™ DE0021E compound is based on Polycarbonate (PC) resin containing 10% carbon fiber. Added features of this grade include: Easy Molding, Non-Brominated, Non-Chlorinated Flame Retardant, Electrically Conductive.

SABIC's Specialties Business LNP™ STAT-KON™ DEL139P compound is based on Polycarbonate (PC) resin containing 15% carbon fiber, 5% PTFE. Added features of this grade include: Electrically Conductive, Exceptional Processing, Flame Retardant, Wear Resistant.

SABIC's Specialties Business LNP™ STAT-KON™ DE0029EC compound is based on Polycarbonate (PC) resin containing 10% carbon fiber. Added features of this grade include: Flame Retardant, Electrically Conductive, Easy Molding.

SABIC's Specialties Business LNP LUBRICOMP UFL36SXC compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized.

SABIC's Specialties Business LNP KONDUIT PX10323 compound is based on Nylon 6 resin containing glass fiber and proprietary thermal filler. Added features of this grade include: Thermally Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business Transparent/translucent PC for light diffusion special effects. Color package may affect performance. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 25 MFR LEXAN™ High Flow Ductile Copolymer This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP LUBRICOMP UL002S compound is based on Polyphthalamide (PPA) resin containing 10% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

SABIC's Specialties Business 40 MFR LEXAN™ High Flow Ductile Copolymer This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP™ STAT-KON™ WX06322 compound is based on Polybutylene Terephthalate (PBT) resin containing glass fiber and carbon fiber. Added features of this grade include: Electrically Conductive, Flame Retardant, Low Warpage.

X-Pro® PP 4220 is a general-purpose, medium-flow, 98% recycled content polypropylene copolymer suitable for injection molding applications. It provides a low-cost alternative to virgin resin while maintaining comparable quality and processability. This product can be used in various application areas, such as general-purpose, industrial, housewares, and construction.

X-Pro® PP 4620 is a general-purpose, medium- to high-flow, high-impact polypropylene copolymer used in injection molding applications where good melt and high impact strength are important. It is a 98% recycled content grade that provides a low-cost alternative to virgin resin, while maintaining comparable quality and processability.

X-Pro® PP 4910 is a general-purpose, lower melt flow, no break, 98% recycled content, polypropylene copolymer suitable for injection molding applications. It provides a low-cost alternative to virgin resin while maintaining comparable quality and processability.  Produced from: post industrial recycled polypropylene  Color: Black  Applications:  Composite Wheels  protective guarding  lawn and garden  automotive  industrial  construction  Processing Method: Injection molding  Melt Flow: 8 -12 g/10 min  Izod Impact - 44 min KJ/M2  Tensile @ Yield - 21 min MPa  Flexural Modulus 0.05 in / min - 828 min  Ash Content - <5% 

X-Pro® 10% GF PP is a polypropylene (unspecified) material with 10% glass fiber reinforcement. It is commonly used in various applications such as automotive, construction, consumer, and industrial. The material is suitable for injection molding processing method. It features general purpose properties and has a black color. Additionally, it contains PCR and PIR resin and includes glass fiber as a filler.

X-Pro® SP200 TF30 3033 is an automotive-certified, general-purpose black polypropylene with 30% talc reinforcement and 98% recycled content, designed for non-visual injection molding applications. This resin is applicable in various industries, including automotive, industrial, construction, consumer, lawn, and garden products.

X-Pro® PP 4212 is a general-purpose, medium-flow polypropylene copolymer suitable for both injection molding and extrusion applications. It serves as a low-cost alternative to our other resin grades, providing comparable quality and processability.Produced from: Recycled post-industrial polypropyleneColor: BlackApplications: industrialwire and cable constructionProcessing Methods: Injection Molding Melt Flow 10-17 g/10 min Izod Impact 1.5 ft lb/in Tensile@ yield 2000 psiFlexural Modulus 0.05 in/ min 100,000 PSI

X-Pro® PP 4230 is a high-flow, 98% recycled-content, general-purpose black polypropylene copolymer suitable for houseware applications and thinner-walled parts in injection molding. It can be used as a low-cost alternative to virgin resin while providing comparably good quality and processability.

X-Pro® 20% GF PP is a polypropylene (unspecified) material reinforced with 20% glass fiber. It belongs to the category of basic thermoplastics under the plastics technology hierarchy. The material is commonly used in various applications, including automotive, construction, consumer, and industrial sectors. It is suitable for injection molding processing method. With its general purpose properties, this black-colored material is known for its versatility.

X-Pro® PP 4420 is a general-purpose, medium-flow, medium-impact, 98% recycled polypropylene copolymer that is suitable for injection molding applications. It is a low-cost alternative to virgin resin while maintaining comparable quality and processability. This product is applicable in various areas, such as general-purpose, industrial, housewares, and construction.

X-Pro® PP 4225 is a medium-impact, high-flow general-purpose polypropylene copolymer made with 98% post-industrial recycled material. It can be used as a low-cost alternative to virgin resin while maintaining comparable quality and processability and is suitable for use in various injection molding applications.

X-Pro® PP 4920 is a general-purpose, higher-flow, no-break, 98% recycled content polypropylene copolymer that is suitable for injection molding applications. It provides a low-cost alternative to virgin resin while maintaining comparable quality and processability. This product is applicable in various areas, such as general-purpose, industrial, housewares, and construction.

XECARB® 37-C30 is a 30% carbon fiber reinforced PA46

XECARB® ST 29-C30 is a 30% carbon fiber reinforced PA4.10

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.

XECARB® ST 20-C30 is a 30% carbon fiber reinforced PA11

XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66

XECARB® HM 29-C40 is a 40% carbon fiber reinforced PA4.10

XEGLASS™ 17-G50-P3 is a 50% glass fiber reinforced PEBA