Products in Consumer Goods: Industrial Applications

Elastocon® CLR15 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR15 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability.Elastocon® CLR15 is supplied as ready to use pellets in 40 lb. bag quantities.

Sylvin™ 8280-65FUV White 1556 is a vinyl compound formulated for outdoor extrusion applications. This compound contains an antimicrobial and an ultra violet stabilizer.

POM copolymer unreinforced, medium viscosity, UV stabilized

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Sylvin™ 8915-60 Natural is a vinyl compound formulated for profile extrusion applications.

Sylvin Technologies Sylvin™ 86022-85UV Clear is a vinyl compound formulated for extrusion applications that require resistance to oil and greases. This compound also has a ultra violet stabilizer for good weathering resistance.

Sylvin™ 8200-90 Clear 876 is a vinyl compound formulated for general purpose extrusion or molding applications.

Sylvin™ 9796-66 Yellow 4167 is a vinyl compound formulated for molded gas pump handles.

Polimersan Plastics Politef ( P.T.F.E. ) is highly resistant to chemical liquids and solvents.

Z-PEI 1010 is a blend of PEI slightly stronger than Z-PEI 9085 and with higher heat deflection temperature. The material can withstand temperatures reaching 208° C. It is also harder than Z-PEI 9085 which makes it perfect for scenarios where high rigidity is of paramount importance. Moreover, it offers broad chemical resistance to automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions among others.

Sylvin™ 4240-48FR Black is a vinyl compound formulated for extruded industrial belting that requires a flame retardant.

Sylvin™ 8729-90 Black is a highly filled vinyl compound formulated for sinkable hose applications.

Domamid® XS 66G60H1 is a polyamide 66 alloy, 60% glass fiber, heat stabilized, is used for injection molding.

Sylvin™ 8330-65D Natural is semi-rigid vinyl compound formulated for extrusion applications.

Sylvin™ 4260-70 Black is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Sylvin™ 8225-85 Black is a vinyl compound formulated for general purpose extrusion or molding applications.

Sylvin™ 83010-60D Natural is a vinyl compound formulated for general purpose extrusion applications that require PROP 65 compliance.

Sylvin™ 4225-75 Red 6314 is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Sylvin™ 8764-65 Brown 7364 is a vinyl compound formulated for profile extrusion applications to improve adhesion to rigid.

Sylvin™ 8621-60 Clear is a vinyl compound formulated for extrusion applications.

Sylvin™ 8716-65 Natural is a vinyl compound formulated for extrusion applications that require low die drool.

Sylvin™ 9600-100UV Clear is a vinyl compound formulated for clear injection molding applications.This material also contains a UV stabilizer for outdoor weathering.

Sylvin™ 8240-60 Black is a vinyl compound formulated for general purpose extrusion or molding applications.

Sylvin™ 9925-65 Natural is a vinyl compound formulated for molding applications.

Sylvin™ 4200-85 Gray 9633 is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Sylvin™ 4299-75 Black is a low cost vinyl compound formulated for extrusion or injection molding applications.

Sylvin™ 9083-53 Brown 7148 is a vinyl compound formulated for general purpose injection molding applications.

Sylvin™ 8280-90FU Natural is a vinyl compound formulated for extrusion or molding applications that require an antimicrobial.

Sylvin™ 84003-85 Black is a vinyl/nitrile rubber alloy formulated for extruded elevator chain coatings.

Sylvin™ 8200-45 Black is a vinyl compound formulated for general purpose extrusion or injection molding applications.

OKULEN® PP H - natural - FN0000 is a natural polypropylene homopolymer with high melt viscosity for compression molding. The product has a high heat- and extraction stability.

Sylvin™ 8707-84 Blue 8455 is a vinyl compound formulated for extrusion applications. This compound contains an antimicrobial and an ultra violet stabilizer.

Sylvin™ 9053-50 Natural is a vinyl compound formulated for molding applications.

Sylvin Technologies Sylvin™ 4200-88UV Clear Green 3213 is a vinyl compound formulated with a non ortho phthalate plasticizer for molding or extrusion applications that require an ultra violet stabilizer.

Sylvin™ 9711-70 Natural is a vinyl compound formulated for injection molding applications.

Sylvin™ 4200-85 Brown 7443 is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.