Products in Repair & Rehabilitation: Epoxy & Epoxy Derivatives

ARCOR® EE-96 is a solvent-free, two-component rebuilding compound specifically formulated to provide high wear and abrasion resistance. It serves as an ideal rebuilding and repair material for metals that have been damaged by corrosion, erosion, abrasion, or cavitation. With its exceptional durability, ARCOR® EE-96 is particularly well-suited for high-wear flooring applications in aggressive wear and impact zones, offering a reliable non-skid surface. This non-sagging compound maintains its integrity up to 200 mils without shrinking during the curing process. It exhibits excellent adhesion to both metal and concrete surfaces, ensuring a robust bond. As a Novolac Epoxy, ARCOR® EE-96 demonstrates excellent resistance in a wide range of chemical environments and can withstand heat up to 450ºF. Choose ARCOR® EE-96 for a dependable rebuilding compound that provides exceptional wear resistance, protects against corrosion and erosion, and maintains structural integrity in demanding environments. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

Alchemy Spetec AP NS950 EPOXY is a two component, non-sag structural epoxy designed to offer exceptional mechanical strength in anchoring/ bonding applications. Due to its high bond strength to concrete, it is ideal to use for anchoring threaded rod or rebar dowels. The consistency of AP NS950 EPOXY is good for capping for crack injection or general surface repairs. AP NS950 EPOXY is 100% solids, VOC free and Butyl Glycidyl Ether (BGE)* free.

Polygem Sinmast 4 Regular is a high performance industrial epoxy formulated for industrial concrete patching and repair. Mix Polygem Sinmast 4 Regular with sand or aggregates to make epoxy grouts.

Applied Technologies 5933 Silver Epoxy is a 100% solids, two component, silver filled epoxy designed for easy non-critical 1:1 mixing and quick cure responses at room temperature (20-25°C). Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/grounding, rear window defroster attachment, and use as a general conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety of substrates including ceramic, glass, metal, and plastic.

Anchor Seal SY5822D* Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is rapid cure, low color, mercaptan (sulfur) odor and is not recommended for underwater use..

Polygem Sinmast 4 Rapid is a fast-setting, fast-curing industrial epoxy formulated for concrete patching and repair. Mix Polygem Sinmast 4 Rapid with sand or aggregates to make epoxy grouts. Polygem Sinmast 4 Rapid is also an excellent choice for fiberglass lay up and laminating applications. Polygem Sinmast 4 Rapid does not contain solvents or toxic styrenes.

MS4310A/MS9235B, is a two part, epoxy compound that is designed for composite laminate repair at temperatures up to 440⁰F. MS4310A / MS9235B has a long working life of 60-90 minutes at 25°C (75°F), for 100g of mixed product. When exposed to higher temperature, substrates and applications, MS4310A/MS9235B retains its’ designed strength properties with a shortened work life. Please note that the working life is significantly decreased when masses greater than 1 lb are mixed before application.

Applied Technologies 5995 Silver Epoxy is a 100% solids, two component, silver filled epoxy designed for quick cure responses at room temperature (20-25C). Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/grounding, rear window defroster attachment, and use as a general conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety of substrates including ceramic, glass, metal, and plastic.

Anchor Seal SY5300* Amber is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is honey-like, low health hazard, general purpose electrical adhesive.

Applied Technologies 5978-14 Silver Epoxy is a high solids, one-component, silver filled epoxy designed for screen printing. Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/grounding, windshield bus bars and use as a general conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety of substrates including ceramic, glass, metal, and plastic.

DuraPatch EPX is a specially formulated, three-component, l00% solids epoxy patching system for resurfacing and repair of concrete substrates. DuraPatch EPX contains a quartz aggregate blend for heavy duty, industrial floors.

Anchor Seal SY5822P* Straw Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is fast cure, general purpose and slight mercaptan (sulfur) odor.

QuakeBond™ 320LV (Low Viscosity Resin) is a two-component, high strength, low viscosity structural epoxy. The low viscosity makes this an ideal product for gravity feed. It can be used as a liquid binder for sand, aggregate or other mineral fillers to form cost-effective material to fill the annular space around piles when PileMedic® laminates are used. The resin cures underwater, making it suitable for the repair of submerged piles. The high compressive and tensile strength of this epoxy provides structural strength for the pile or pole in repairs using PileMedic® laminates. QuakeBond™ 320LV can be used in the repair of concrete, masonry, and wood structures. QuakeBond™ 320LV is a 100% solids formulation with low toxicity and low odor during the cure.

Applied Technologies 5902 Silver Epoxy is a high solids, two component, silver filled epoxy designed for easy noncritical 1:1 mixing and quick cure responses at room temperature (20-25 °C), or low heat (100°C). Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/ grounding, thermal dissipation, and use as a general electrically conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety or substrates including ceramic, glass, metal, and plastic.

ManuSpec MS2110A / MS9298B, is a two part, low viscosity epoxy compound that is designed for composite laminate repair. ManuSpec MS2110A / MS9298B has a working life of 60 minutes at 25°C (75°F), for 100g of mixed product. When exposed to higher temperature, substrates and applications, ManuSpec MS2110A / MS9298B retains its’ designed strength properties with a shortened work life. Please note that the working life is significantly decreased when masses greater than 1 lb are mixed before application.

Bonstone® Crack Repair 28 is a two-component, exterior grade, clear, medium viscosity epoxy.

CPP™ Gel: Crack Injection is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength epoxy paste and reinforced structural-grade epoxy. Similar to “standard” CPP once cured, this version is packaged more conveniently for Crack Injection and repair by extrusion. Contains no solvents. CPP™ Gel: Crack Injection bonds to concrete, steel, wood, brick, some plastics and most construction materials. Application temperature range is between 40°F and 100°F.

Anchor Seal SY5650* Amber is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is low health hazard - general-purpose, limited drip / thixo version of SY5300.

CPP™ Sprayliner™ is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength and reinforced epoxy. Equal to “standard” CPP once cured, this version is packaged more conveniently for spray applicators seeking to utilize plural-component heated spray application. The material can be sprayed ultra-high build, between 1/16” - 1/4” (62.5 - 250 miles) per pass. Blended with reinforcing agents and various fibers, the Epoxytec CPP™ Sprayliner™ when cured creates reinforcement lining as a fiber-reinforced-polymer (FRP), with high strength and flexural properties for partially or fully deteriorated structures.

K Pro UC Epoxy Grout is a three-component, 100% solids, extended-pot life, and moisture-insensitive marine epoxy grout system. The extended pot life of K Pro UC Epoxy Grout sets it apart from the competition. This unique feature greatly enhances the ability to pump K Pro UC Epoxy Grout longer distances. K Pro UC Epoxy Grout can also easily be poured or used in tremie applications. No fillers, non-reactive diluents, or solvents are used in K Pro UC Epoxy Grout. Additionally, K Pro UC Epoxy Grout may be used in fresh, salt, or brackish water, and will bond effectively to wood, concrete, steel, and fiberglass.

Anchor Seal SY5300ML Mber is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It has bonds hammer handles, tough impact resistance and colors available.

Armor Plate 990 All Purpose Epoxy Putty is a trowelable grade epoxy grout that is ideal for a variety of maintenance and construction projects. AP 990 is versatile because it forms an impervious chemical and moisture barrier that inhibits corrosive and oxidizing processes at rebar and anchor bolts. AP 990 is primarily used for grouting rebar and anchor bolts. It is also used as a putty material, as a patching compound for concrete, steel, and wood, and as a repair material for pump housings. AP 990 is recommended for anchoring equipment such as compressors, diesel engines, printing presses, power generators, hydraulic presses, turbines and pumps.

CPP™ Gel™ is a two-component, high strength, extremely forgiving/tolerant, vertical and overhead, non-sag. fast set epoxy paste, packaged in a convenient 1-to-1 mix ratio to use as needed and restock. The Epoxytec CPP Gel provides a point-of-use application to save time and material. The material has a wide variety of applications and is often sought for concrete, steel, and other substrate repairs, filling, patching and as an adhesive. Epoxy-based material is a sealed and protective solution to combat corrosion.

Armor Plate 991 Anchor Bolt and Rebar Grout For Vertical Holes is a pourable grade epoxy grout that is ideal for a variety of maintenance and construction projects. AP 991 is so versatile because it forms an impervious chemical and moisture barrier that inhibits corrosive and oxidizing processes at the rebar and anchor bolts. AP 991 is primarily used for grouting rebar and anchor bolts. It is also used as a patching compound for concrete, steel, and wood. AP 991 will also bond new concrete to old concrete. AP 991 is recommended to anchor equipment such as compressors, diesel engines, printing presses, power generators, hydraulic presses, turbines and pumps.