Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
The mix ratio of MS4310A/MS9235B resin to hardener is 100:26 by weight and 100:33 by volume. When fully cured, the material produces a durable, resilient bond that has strong environmental resistance to strong acids, bases and aggressive solvents. MS4310A/MS9235B was designed primarily for composite repairs to ferrous and aluminum substrates.
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Instructions for Use
Combine the proper proportions of resin and hardener in a clean container. Mix both components thoroughly until a uniform mixture is achieved. The work life of the mixture will vary with temperature and the quantity of material.
Caution: Mixed material evolves significant heat when quantities greater than 1 lb are mixed well, not applied, and remain in a concentrated mass.
Properties
- Appearance
- Pale Yellow (Visual), Clear (Visual)
- Component A
Value Units Test Method / Conditions Brookfield Viscosity approx. 675 - 750 cP ASTM D2393 Density approx. 1.16 g/cc ASTM D792 - Component B
Value Units Test Method / Conditions Brookfield Viscosity 50 - 65 cP ASTM D2393 Density approx. 0.97 g/cc ASTM D792 - Typical Properties
Value Units Test Method / Conditions Compressive Strength Modulus (8hr, 66°C) 725.0 ksi ASTM D-695 Compressive Strength Yield (8hr, 66°C) 14700.0 psi ASTM D-695 CTE (<Tg) [4hr, 66°C] 26.0 e-06/°C TMA (10°C/min) CTE (>Tg) [4hr, 66°C] 181.0 e-06/°C - Glass Transition (4hr, 66°C) 88.0 °C TMA (10°C/min) Modulus (2hr, 121°C) 13200.0 psi ASTM D-695 Tensile Strength and Percent Elongation (4hr, 66°C) 8500.0 psi ASTM D-638 Tensile Strength and Percent Elongation (2hr, 121°C) 13000.0 psi ASTM D-638 Yield (2hr, 121°C) 16500.0 psi ASTM D-695 - Mixed Material Properties
Value Units Test Method / Conditions Brookfield Viscosity approx. 500-600 cP ASTM D2393 Density approx. 1.11 g/cc ASTM D792 - Cure Schedule
Cure Schedule Option 1 Option 2 *7 days at 25°C X (S) 24hr at 25°C X (S) 8hr at 66°C X (S) X (U) 6hr at 82°C X (S) 4hr at 93°C X (S) X (U) 2hr at 121°C X (S) X (U) 2hr at 149°C X (S) X (U) 2hr at 177°C X (S) X (U) *For full cure at ambient temperature, S = Supported U=Unsupported
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
MS4310A/MS9235B is packaged in pints, quarts, gallons, pails, and drums. The hardener is packaged according to the container size of the resin.
Storage & Handling
- Pot Life (100g mass, 25°C)
- approx. 60 - 90
- Storage and Handling
The shelf life of ManuSpec MS4310A/MS9235B is 12 months at 25°C. MS4310A / MS9235B exhibits no signs of crystallization For best results, store in original, tightly closed containers in a cool, dry place out of direct sunlight. Containers should be loosely covered during the heating process to avoid pressure buildup. Allow contents to return to room temperature before mixing resin and hardener.