Products in Building & Construction: Surface Finish

Schmelzer Industries PEARLVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Schmelzer Industries PEARLVEIL 1/2 Ounce is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Nord Composites GC 181 is a gel coat based on isophthalic resin, thixotropic and pre-accelerated product, for quality applications, without sagging on vertical walls, gel coat with good mechanical, impact and UV resistance.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

Polycor® 947 Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, 947 series gel coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Polynt’s 947 series gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

KarpatSmoly UMF Resin Grade A is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% of melamine by weight.

Hollingsworth & Vose Co. 8000018 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group 224X series clear gelcoats are enamel like coatings developed for the composites and fiberglass industry. These gelcoats are used as an enamel coating, similar to paint and are often used as a translucent coating. The 224X series gelcoat can also be used to protect the laminate against u.V. Rays. 224X series gel coats are sag resistant and have a fast curing system. This coating system is ready to spray, requiring only the proper addition of an appropriate methyl ethyl ketone peroxide to cure.Formulated for spray and roll application.Fast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Resistant to thermal change and weathering for parts in contact with water, severe conditions we recommend an iso/npg base gelcoat for marine applications. Parts that have to be assembled should be sanded and cleaned, to obtain a good adherence.

POLYCOR® LP BR WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.

Hollingsworth & Vose Co. 8000130 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Sogel Clear Gel coats have been formulated from ISO / NPG resin to provide a clear finish with very good long-term abrasion and stain resistance. These gel coats have very good application properties and surface finish.

Hollingsworth & Vose Co. 8000015 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

AeroWindTech AWTPP 601 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-601 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish -N or the -SRG crosslinked Polymer for superb release.

Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.

Sogel Aquaguard Gel coats are developed from a proprietary ISO/NPG resin with high quality pigments and special additives. These gel coats provide excellent resistance to chlorine, blush/blister resistance, weathering resistance, and gloss retention. They have very good flexibility and crack resistance at demold.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Polycor® Mesmeric is the most recognizable fiberglass swimming-pool finishes range in australia: it is unbeatable in terms of performance, practicality and value for money, as well as esthetically beautiful. Formulated on Polycor® 943 gel coats, Polycor® mesmeric pool finishes offer exceptional water and chemical resistance, as well as long lasting UV stability. Available in three distinct styles, there is a color and texture combination that will co-ordinate with any architectural or exterior setting. Mesmeric stargaze has a brilliant deep sparkling lustrous finish that looks fabulous from a distance. The tiny sparkles change color as the direction of light changes. A fantastic effect as wave action changes the sparkle in sunlight or by pool light at night. Mesmeric granitea has a slightly more restrained finish, still with a beautiful lustrous gloss, but with a fascinating stone texture enhancement, giving a subtle natural look. Mesmeric silken has a deep, lustrous gloss finish but without any texture effects – designed to blend into more traditional architectural surroundings. It is generally used in composites applicatons.

Schmelzer Industries PEARLVEIL 7 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

AV10AF is a adhesive film prepreg and Adhesive film prepreg for metal-metal, metal-thermoset, thermoset-thermoset, thermoset-honeycomb bonding applications.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

KarpatSmoly UMF Resin Grade B is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% of melamine by weight.

Polynt Group 32X series are barriers type coatings developed for the composites and fiberglass industry. The 32X series have been formulated to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. This barrier coat was primarily developed for parts that are in conditions with prolonged contact with water and reduce the risk of water blistering. The 32X barrier coat are formulated to result with a fast cure, sagging resistant and ready-tospray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide catalyst. Normally, dark Colors help to detect and eliminate air bubbles. However, it also can affect the quality of the final product. Contact you representative to have more details on Colors available. Because these 32X series barrier coat are formulated with special additives they have a fair resistance to UV and are not recommended for direct sunlight exposure. It would result in rapid chalking and fading.

L & L Products L-9060 Part A is a fire, smoke, and toxicity (FST) compliant, two-component light weight epoxy formulation designed for panel finishing and reinforcement of aircraft interiors.

KarpatSmoly MUF Resin is an aqueous suspension, non-flammable, non-explosive. The finished product contains 10% – 24%of melamine by weight.

The formulation of our high performance Marine ISO/NPG Gel coats are based on a special ISO/NPG polyester resin. These products were developed to provide good durability and superior flexibility, while keeping high quality finish and minimal maintenance. Additionally, their excellent Air Dry times make them suitable for repairs and repainting. The combination of neopentylglycol and isophtalic acid provides excellent resistance, not only to water blistering and osmosis, but also to the UV light.

GELCOATS TP1001 is a Orthophthalic based gelcoat.

Schmelzer Industries PEARLVEIL 30 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Hollingsworth & Vose Co. 8000030 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

Lavecoat FT Represents an evolution in the flame retardant gelcoat range since thanks to its intumescent properties it provides high fire protection combined with a very low smoke emission. In combination with Lerpol RS61, it enables the manufacturing of parts rated class HL3 in R1 and R7 according to EN 45545 norms.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

POLYCOR® LP PA WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

Sogel Sanitary Gel coats have been developed from an ISO/NPG resin in combination with pigments and high quality additives. These high performance gel coats offer high resistance to osmosis, making them ideal for sanitary applications. Our line of Sanitary Gel coats are in compliance with the requirements of the American National Standard for plastic baths and showers as well as with the MACT standard of the EPA for the manufacture of composite materials.

Schmelzer Industries FLEXIVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for compound curved composite parts. Process applications include Compression Molding, Continuous Lamination, ,Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG), Other unique applications.