Products in Building Materials: Epoxy & Epoxy Derivatives

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

Cardolite® Lite 2020 is a low viscosity multipurpose resin modifier designed for use in coatings, adhesives, and other applications. It features a long hydrophobic aliphatic side chain of the cardanol molecule, providing excellent early water resistance and corrosion protection. It can be used as an epoxy diluent, allowing for enhanced workability and higher solids in formulations without sacrificing performance properties. It can also be used in alkyds, urethanes, and acrylics.

BD54750 is a low viscosity polyamine epoxy product. The BD54750 is designed for metals and plastics bonding. This product is ideal for highway and bridge deck repairs, potting, casting, and encapsulation, floor systems, linings of tanks and pipes, and coatings. This product has good chemical, corrosion, and water resistance. It is especially formulated for a 1:1 mix ratio for use in side by side cartridges, or to be used by hand mixing, or use with meter mix equipment. A handling cure is normally achieved at room temperature within 4 hours with a full cure at room temperature within 48 hours. To accelerate the final cure, or to quicken the handling simply elevate the temperature.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.

NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.

NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.

NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.

NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202

LEEBOND 15-93-1 is a two-part, room temperature curing epoxy adhesive designed for bonding oily steel to various substrates.

BECKOPOX™ EP 386W/52WA is an epoxy and epoxy derivative binder and resin from CASE Ingredients, featuring benzyl alcohol-free and VOC-free labeling. Designed with corrosion resistance, improved flexibility, and matte gloss capability, it caters to the automotive, construction, and coatings markets. Ideal applications include automotive OEM coatings, marine coatings, and industrial finishes on metal and plastic substrates.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

ARCOR® 2211 is a highly exceptional repair composite material that stands out as the most unique option available in the market today. This formulation combines various multi-functional resin groups, fine ceramic powders, and an impressive array of 23 different additives, resulting in the ultimate weapon against erosion and corrosion. Its remarkable holding strength allows it to maintain a 3/4" thickness on vertical surfaces, while its creamy texture allows for effortless smoothing, achieving a glass-like finish. With three times the bonding strength and three times the chemical resistance compared to our closest competitor, ARCOR® 2211 outperforms other ceramic-filled rebuilding compounds. It is fully machinable and its non-slumping characteristics make it perfect for molding worn parts in place, eliminating the need for machining. Suitable for a wide range of mechanical repairs, particularly those caused by the combined forces of erosion and corrosion, ARCOR® 2211 is the go-to solution for everyday applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

Grade RT130 meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130 has excellent machining characteristics. RT130 complies with IEC 61212-3-1 EP GC 23.

BECKOPOX™ EP 384W/53WAMP is an epoxy- and epoxy derivative-based binder and resin by CASE Ingredients. Tailored for diverse markets such as automotive and transportation and paints and coatings, it offers corrosion resistance and enhanced chemical resistance. This liquid dispersion, known for its multi-substrate adhesion, is suitable for various applications, including automotive OEM coatings, marine coatings, and industrial coatings on metal surfaces.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

BECKOPOX™ EP 2340W/56WA is a liquid binder and resin within the epoxy and epoxy derivatives family, provided by CASE Ingredients. Notably APEO-free, formaldehyde-free, solvent-free, and VOC-free, it showcases enhanced chemical resistance and hardness. Tailored for the building and construction and paints and coatings sectors, its applications span decorative paints, building envelopes and roofing, and EIFS and insulation. This product, compatible with epoxies, is available as both an epoxy and waterborne coating, eliminating the need for a primer due to its primerless feature.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

BECKOPOX™ EP 2384W/57WA is a dispersion and liquid binder and resin classified under the epoxy and epoxy derivatives family by CASE Ingredients. Notably benzyl alcohol-free, solvent-free, tin-free, and VOC-free, it offers a good balance of properties with features like high film thickness, low odor, matting, multi-substrate adhesion, and reduced surface preparation. Catering to automotive and transportation and paints and coatings sectors, it finds applications in automotive OEM coatings, marine coatings, vehicle refinish, decorative paints, industrial coatings, and metal coatings. This product, compatible with epoxies, is formulated as both epoxy and waterborne coatings suitable for various substrates, particularly metal.

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

BECKOPOX™ EP 387W/52WA is an epoxy and epoxy derivative binder and resin by CASE Ingredients, labeled benzyl alcohol-free and VOC-free. Noted for its corrosion resistance, improved flexibility, and matte gloss capability, it serves the building and construction and paints and coatings sectors. Applications encompass decorative paints, EIFS, insulation, and industrial coatings on both metal and plastic substrates.

EBECRYL® 600, the diacrylate ester of bisphenol A epoxy resin, is distinguished by its light color and rapid cure response. Widely utilized in UV/EB applications, including inks, coatings, and overprint varnishes, EBECRYL® 600 stands out for its versatile performance. This product is particularly suitable for applications involving metal and wood substrates. Key features encompass faster cycle time, low energy consumption, long pot life, improved hardness, high gloss, improved chemical resistance, and low-temperature curing. It finds applications in decorative paints, wood coatings and finishes, EIFS, and insulation, utilizing radiation cure methods.

Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

BECKOPOX™ EP 147W is a liquid binder and resin belonging to the epoxy and epoxy derivatives family from CASE Ingredients. This product is distinguished by its APEO-free, formaldehyde-free, isocyanates-free, solvent-free, and VOC-free labeling claims. Designed for automotive, transportation, and paints and coatings sectors, it offers improved chemical resistance, flexibility, hardness, and a low odor. It serves applications such as automotive OEM coatings, marine coatings, decorative paints, and industrial coatings on metal substrates. Additionally, its formulation allows emulsification in water, making it suitable for primer and waterborne coating types.

Glycidoxy (epoxy) -functional silane that is used as a coupling agent for unsaturated polyester– fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Grade RT130M meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130M has excellent machining characteristics. Certification to IEC standard is pending.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Duresco NU 514 K/NU 514 L is a Flame retardant epoxy molding compound with good mechanical properties, excellent chemical and high tracking resistance.

CHS-EPOXY 531 is a Solvent free system with high chemical resistance to solvents. Solvent free system, low temperature, wet conditions, very fast hardening. Epoxy resin modified with bi-functional reactive diluent.

Razeen® LR 2308 is a Hydrogenated Bisphenol A based cycloaliphatic epoxy resin.

1255 Black Barrier Coal Tar™ is a two component high build Coal Tar Epoxy for use on properly prepared steel, aluminum, galvanized and concrete substrates. Provides heavy duty protection for exposures in marine (ship hulls, tanks, pilings, etc.) petroleum, (refinery tanks, piping, offshore structures, etc.) water and water treatment. Black Barrier Coat meets or exceeds all requirements of the Corp. of Engineers Specification C-200, Government Specification MIL-P 23236 and Steel Structures Paint System SSPC Paint 16-68T.