Products in Other Building Materials: Epoxy & Epoxy Derivatives

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. The fast hardener TGS is used for thin laminates and small-volume back fillings.

Ebalta AH 110 / TG is a High strength general purpose resin.

B1 Primecoat™ is designed as a high-performance sealer and coating formulated for concrete. B1 Primecoat™ is supplied in a convenient one-to-one mix ratio. B1 Primecoat™ is capable of penetrating and filling the porous structure of concrete in order to provide an effective subsurface barrier to prevent moisture migration, out-gassing, and chemical penetration. Epoxytec B1 Primecoat™ exhibits highly penetrating properties which provide porous filling and strengthening of the top concrete layer to form a sufficiently strong base for subsequent top coats.

Paceline EAR1 Resin has an optimized molecular weight which gives a lower viscosity and decreased surface tension providing a superior fiber wet out.

Paceline Composite Matrix Resin is effortless to work with, and finishing edges is easy and smooth.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Features Clear and transparent Rigid and tough Great for headlamps, bottles and transparent assemblies Excellent humidity/moisture resistance

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. Due to its almost odorless skinfriendly hardener GL this mixture is also suitable as laminating resin. The good wetting properties allow fast laminating and lead to high glass contents of the laminate. This way you get solid and dimensionally stable parts.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Paceline Nano-Res Resin exhibits higher strength and rigidity than competing epoxy acrylic resins, and provides superior fiber wet out and working characteristics. It is excellent for use with Carbon Fiber, and other new age composite materials such as Kevlar, Spectra, Synthex, Basalt, etc.

Razeen® LR 1140 B is a versatile unmodified liquid epoxy resin similar to Razeen® LR 1100 but with lower viscosity.

Lattice Composites LCWR250-TT is highly toughened, single component, long shelf life winding resin.

CHS-EPOXY 512 is a Solvent–free epoxy system with high chemical resistance. Special solvent–free epoxy system, low temperature, wet condition, very fast hardening. Epoxy bonding agent for fixing of metal parts into mortar constructions. Epoxy resin modified with non-reactive modifier, flexibilized.

Features Clear and transparent Rigid and strong Great for investment casting patterns Headlamps, bottles and transparent assemblies

CHS-EPOXY 525 LA is a BPA type with low α-glycol content.

BC 7053 is an iron filled epoxy casting system. This system is a high iron content material that provides unsurpassed wear resistance. BC7053 was designed for use in constructing core boxes, holding and trimming fixtures, foundry patterns, etc.

MS7125 5minute Steel Putty, is a two part, epoxy compound that cures quickly at room temperature. MS7125 5minute Steel Putty is designed for Bridging large gaps or holes and Vertical surface applications. The mix ratio of MS7125 5minute Steel Putty resin to hardener is 100:60 by weight and 1:1 by volume.

45 Primecoat™ is a single-component epoxy primer formulated to provide a base coat prior to coating concrete, steel and other substrates. Provides an excellent cross-link with added adhesion. Formulated to assist in the adhesion of coating applications, adhesives, and other epoxies; particularly improves the adhesion of urethane materials as well. Being in the epoxide family, as a penetrating and thin-mil surface sealant, it also performs as base protection for chemical resistance and extended water immersion.

APCM DA 4518 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 250°F (121°C) for one hour and or a cure of 350º F (177ºC) for 1 hour. This material needs to be post cure or cured to 350ºF to get the 350º properties.

Razeen® LR 1100 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

CHS-EPOXY 517 is a Solvent-free system with high chemical resistance. Solvent-free system, low temperature, wet conditions, very fast hardening. Epoxy resin modified with reactive diluent, flexibilized.

CHS-EPOXY 590 Is BPF type.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Razeen® LR 2302 is a medium viscosity Bisphenol A/F based liquid epoxy resin, with a reduced risk of crystalisation on storage at low temperature.

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

Ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. AH 100 / TGL is preferentially used for big volume backfillings.

APCM DA 409U/G35-150 is a tough, versatile, modified epoxy resin prepreg that cures at 250°F, a standard modulus 150 g/m2 carbon prepreg tape which can also be supplied as a 200g/m2 or a 300 g/m2 prepreg.

CHS-EPOXY 200 M 75 is a Solution of low molecular weight epoxy resin in methylethylketone.

Razeen® LR 2282 is a general purpose unmodified epoxy resin based on Bisphenol F with medium viscosity.

Araldite® GY 6010 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

Ebalta AH 110 / TGS is a non-filled epoxy resin with high strength and dimensional stability, even at increasing temperature. It also can be used as casting resin with powder fillers as aluminum powder, as laminating resin with glass fabrics and as binding resin with granular fillers as aluminum granules. Depending on the application if just needs to use a different hardener for the mixture. As laminating resin AH 110 / TGS is suitable for thin high solid laminates.

CHS-EPOXY 411 is a Semisolid epoxy resin based on Bis A

CHS-EPOXY 520 is a BPA type.