Products in Rail & Mass Transit Coatings

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Kraton D1163 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1163 JSP supplied as dusted, dense pellet. Kraton D1163 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Polymac® 2090 is a medium to low reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins EEW = 700-850 in 60:40 ratio, this resin offers excellent flow, good corrosion resistance, good overall chemical resistance, and very good mechanical properties for interior decorative or primer coatings.

Leveling agent for powder coatings Lu'An Jietonda New Material K7567 is a white powder based on an acrylate polymer active ingredient. It has good leveling properties for powder coatings.

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

Araldite® GT 6750 N is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

Kraton D1184 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: Kraton D1184 AS - supplied as porous pellets dusted with amorphous silica Kraton D1184 AT - supplied as porous pellets dusted with talc Kraton D1184 ASM - supplied as powder dusted with amorphous silica Kraton D1184 AIM - supplied as powder dusted with calcium carbonate for supply to the North American market Kraton D1184 A polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

Mascoat® 250P is a high solids aluminum epoxy mastic primer that provides excellent corrosion protection over marginally clean substrates up to 250°F. It is intended for use under Mascoat’s insulating coatings, but can also be top-coated with epoxies and/ or polyurethanes. It is predominantly used on structural steel, steel tanks, barges, refineries, petrochem plants, power plants, railcars, pulp & paper mills, and other facilities as recommended.

Technicure® TDU-200M is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

Polypol 613 has high Solids, excellent hardness, gloss & flexibility and also excellent weather & chemical resistance.

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

Lu'An Jietonda New Material K7656 is a Degassing agent for powder coatings.Jietonda® K7656 is a specific degassing agent designed for eliminate bubbling of powder coated on porous substrates.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.

Ply-Guard PSC8 is a newly engineered two-component Polysiloxane coating technology offering the combination of technologically advanced siloxane resins and special ultraviolet inhibitors resulting in an industrial finish coat providing exceptional long term durability. Ply-Guard PSC8 provides extremely long-term performance and a wide range of uses such as exterior coatings for bridges, marine vessels, offshore structures, railcars, tanks, pulp and paper mills, chemical plants, refineries, and other steel structures exposed to the most corrosive environments.

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

T Astral Pink 1 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Kraton D4153 E is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40 phr paraffinic oil which is classified as not hazardous. Information on the CAS and EINECS registry numbers of the paraffinic oil used for this grade is available on request. The product is supplied from Europe in the physical form identified below. Kraton D4153 ES - supplied as porous pellets dusted with an amorphous silica Kraton D4153 ESM - supplied as powder dusted with an amorphous silica Kraton D4153 E is used in formulating compounds for footwear, technical and general purpose applications. It can also be used in formulating adhesives, sealants and coatings and as a modifier of bitumen.

Lu'An Jietonda New Material SA300 is a Glycidyl functional acrylic resin for powder coatings.Jietonda® SA300 is a glycidyl containing-solid acrylic resin capable reactive with carboxyl or amine compound, which is designed to be used in combination with other curing agents to provide powder coatings with higher crosslink density, improved mechanical properties, heat and chemical resistance.

Reacrone PCL-650 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Kukdo Chemical KD-176X80 is high solid epoxy resin.

Razeen® SR 5143 is a Solid epoxy resin “type 2½” based on bisphenol-A, containing 2.5% flow agent.

EpoxyGrip® 2900 is used as a rapid recoat high build primer to provide excellent corrosion protection for steel substrates. Designed to be used in interior and exterior heavy-duty service in corrosive, industrial atmospheres. Excellent for use on structural steel, steel tanks, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Used as a shop primer for OEM applications.

Razeen® SR 5357 is a Solid epoxy resin based on bisphenol A and phenol novolac for powder coating.

Kraton D1124 P is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 PT - supplied as a dusted dense pellet Kraton D1124 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

T Comet Blue 60 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

T Arc Chrome 6 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Consolidated Coatings Polyaspartic Acrylic Urethane Gloss 52-7000 is a high build, high performance, two component aliphatic urethane.,.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.