Products in Rail & Mass Transit Coatings

HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne coating systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems. It may also be used as a metal pretreatment additive.

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

HALOX® SZP-395 is a white, non-refractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-395 is the most efficient and versatile corrosion-inhibiting pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin film applications (<1 mil or 25 microns).

HALOX® 550 WF is a water-free (WF) corrosion inhibitor and adhesion promoter that uses a sol-gel-based formula. It is designed to protect a variety of coatings, including waterborne and solventborne clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. This product is suitable for use in low-pH and acid-catalyzed systems.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

SYNTHALAT A 077 is a polyisocyanate-curing acrylic resin. Used in 2-pack coatings, in combination with aliphatic polyisocyanates, for industrial coatings that offer good mechanical properties along with resistance to chemical attack. It has applications in marine transportation, rail and mass transit coatings, coatings and markings, and also in infrastructure road paving.

Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.

Crystic® Brush Mouldguard (B) is a flexible pre-accelerated thixotropic coating material for mold protection. It has been formulated for brush application and is available in a restricted range of colors. It has been specifically developed for the protection from composite molds when put into storage or for transportation. The cured coating has been designed to give easy stripping from stored moulds prior to re-use.

Crystic® Sandable Spray Gelcoat 44PA is an isophthalic sandable spray gelcoat for post painting application. This pre-accelerated, isophthalic, filled gelcoat has been specifically designed for applications that are to be post-painted mainly for transport industry. Crystic Gelcoat 44PA has been formulated for spray application.

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.

Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.

Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.

Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Fireguard Gelcoat 73PA is a new technology fire retardant brush gelcoat that is halogen free. It has a number of fire approvals with different crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Brush Gelcoat LS 31PA is a superior weathering iso/NPG brush gelcoat offering better color stability than all other competitive iso/NPG gelcoats tested in Florida for 12 months. It has been formulated for ease of use in production, easy to repair and can be used in all market sectors including marine. It has excellent water resistance and has Lloyds approval.

Crystic® Low Viscosity Gelcoat 64PA is a high performance isophthalic gelcoat, pre-accelerated and formulated for brush or roller application. It is recommended for use in all markets including marine, land transport and building applications and is also suitable for general molding requirements. Crystic® Gelcoat 64PA is approved by Lloyd'™s Register of Shipping.

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Crystic® Sandable Brush Gelcoat 42PA is an orthophthalic sandable gelcoat, filled, pre accelerated and formulated for brush application. It has been specially designed for applications that are to be post-painted. This gelcoat is available in a limited range of colors.

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

ADDITOL® P 891, designed as a flow promoter, offers versatile solutions for clearcoat and powder coating applications. ADDITOL® P 891 proudly claims to be TMA-free and VOC-free, adhering to stringent environmental standards. Its applications extend to the building and construction sector, specifically decorative paints. Available in solid granules with a pale appearance, ADDITOL® P 891 ensures ease of use and effectiveness in promoting flow, contributing to superior results and reliability in coating applications.

CeraSPERSE 87NS is a polymeric compound for non-skid applications. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

Catana™ EPOX 2015 is a distilled min. 98% grade of 2-ethylhexylglycidylether. Catana™ EPOX 2015 main use is as reactive diluent for high viscosity epoxy resins applied in high solids coatings, tooling, flooring, adhesives, etc.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

TACorr G50 is a novel, polymeric corrosion inhibitor, offering multi metal protection, e. g. On alumina alloys, iron & steel, non ferrous metals, zinc and others. It was developed through a combined R&D project with Fraunhofer IFAM, Bremen.