Products in Ready-to-Use Products: Mixtures & Blends

Ferrnsol Wire Cleaner is a concentrated cleaner and degreaser for use after or during the final steps of the wire drawing process. It is made from biodegradable surfactants that easily remove the residual film of lubricant on wire surfaces. It can be used on both ferrous and non-ferrous metals.

JTM Products - Soaps and Cleaners Skid-Daddle is a specially formulated cleaner. It is designed to remove rubber tire marks from epoxy or other polymer floor coating systems without damaging the floor coating. Skid-Daddle® is a blend of special cleaning agents with a pale yellow color and a fresh citrus fragrance.

ECP 537 static dissipative high-temperature paint is a single component static dissipative silicone/acrylic coating that provides excellent anti-static protection in addition to its anti-corrosion properties. Continuous heat resistance is provided up to 3500C. Used in areas where ESD (electrostatic discharge) is to be avoided.

Biosynthetic® Motor Oil 5W-30 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

Biosynthetic® Motor Oil 5W-20 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

SERVICE PRO® API SP-RC ILSAC GF-6A 0W-20 are high performance synthetic motors oils specially formulated to meet the stringent lubrication requirements of today's engines. These oils provide maximum protection against rust, corrosion, acid formation, sludge and varnish while yielding exceptional oxidation and low temperature performance. The API SP Resource Conserving specification protects against low speed pre-ignition and chain wear found in newer modern engines, while maximizing fuel economy. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

Thermaflo® A is a high performance synthetic heat transfer fluid designed to meet the demands of liquid or vapor phase systems and indirect heat transfer. Operating temperature is 12°C to 400°C (54°F to 750°F) for liquid phase systems, 257°C to 400°C (495°F to 750°F) for vapor phase systems.

Valvoline 101S is blended from selective mineral base oils, emulsifier and other additives to provide a stable well dispersed milky emulsion with water. It is suitable for mid to heavy duty cutting and it extends tool life and improves surface finish.

MDS Lubricant Suppliers FF114PC - Powder Coating Repair Spray 400ml Aerosol is the world’s first Aerosol repair compound for Powder Coated surfaces, the only product to use when a professional finish matters. Don't paint - repair and renovate powder coating with FF114PC. Specifically developed to effectively repair damaged or cut powder coated surfaces, one-step repair spray for the protection and color coding of powder coated and/or galvanized metal components, cladding or sheet. May also be applied to plastisol sheeting. FF114PC is ideal for the restoration of the finish of powder coated surfaces after cutting, welding and grinding. FF114PC is totally unique, easy to use and permanent one coat repair finish for powder coated components and sheeting. Unlike paint touch ups which will crack and/or peel away within a relatively short period, allowing corrosion to form, FF114PC forms a permanent vinyl resin flexible coating which will not become brittle and crack or peel away from the surface which has been repaired. This product ensures a permanent repair which will provide years of service in any conditions. Resistant against aqueous alkaline and acid solutions FF114PC will ensure a long lasting professional repair to a wide variety of surfaces. This product contains no nut derived, genetically modified, soya, animal derived or vegetable derived ingredients.

WINTREX® heat transfer fluid is an inhibited ethylene glycol designed for use in hydronic systems for freeze and corrosion protection. The effectiveness of WINTREX® heat transfer fluid in preventing corrosion has been proven both in use and in laboratory testing. Using WINTREX® in place of brine solutions or uninhibited glycol/water solutions lowers maintenance costs and improves heat transfer efficiency.

Five Star Liquid Circulation Cleaner is heavy-duty, liquid, caustic. Removes beer and beverage soils and other off-flavor producers from beer lines. Low-foaming. Can be used in both and cold applications. Will withstand storage temperatures as low as 32°F.

Lubriplate® Darl No. 2 ISO Grade 46, Mineral oil is a combination sulfurized-fatty type mineral oil produced under exacting conditions, offering superior tool life and finish as a multi-purpose dark cutting oil. LUBRIPLATE Darl No. 2 Cutting Oil is recommended for all types of machining operations, working with both ferrous and non-ferrous metals. It is especially recommended for difficult low carbon steel work, such as tapping, threading, broaching, gear cutting and piercing. Ideal for working with a wide variety of metals such as carbon steel, copper, brass and aluminum. One of the special features of LUBRIPLATE Darl No. 2 is that it is non-corrosive. This product will not stain or discolor copper, brass or aluminum. Also, it does not harm bearings in machines having leakage of cutting oil into the lubricating system, such as automatic screw machines.

Mighty Lube® Type ML is a heavy duty, thin film, anti-wear lubricant formulated to protect against wear and corrosion in temperature ranges of -65°F to 500°F.

Camie® 573 High Performance Adhesive Low VOC is a unique formula prevents soak in of the adhesive on porous surfaces. It offers the user very high coverage with a fast tack time for general purpose bonding of a wide variety of substrates.

K-FLEX® K-FONIK GK ST is a smooth elastomeric sound insulation panel in various thicknesses, coupled with a high density elastomeric sheet. The product is lead-free and therefore does not represent a health risk. K-FONIK GK ST combines the features of K-FONIK GK with a layer of our elastomeric sheet. Flexible It is a elastomeric foam with high-density elastomeric material.

Valvoline ANTI-WEAR HYDRAULIC OILS VG 68 have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives.

Lubriplate® Cut-N-Cool ISO Grade 68, Mineral oil combines the machining efficiency of a cutting oil with the cooling ability of water all in one product. LUBRIPLATE CUT-N-COOL is a heavy duty water extendable sulfur-chlorinated metalworking coolant formulated to offer outstanding performance in difficult machining and grinding operations involving hard-to-work metals such as stainless steel, tool steels and high nickel alloys. LUBRIPLATE CUT-N-COOL may be used on all metals except magnesium, copper and some bronze alloys, which may be stained. LUBRIPLATE CUT-N-COOL will perform as well as straight oil in most applications.

Mighty Lube® Type GPC 220* is a pure synthetic, water soluble high temperature conveyor lubricant specially formulated for the lubrication of chains, rollers and bearings of automotive paint line conveyors and other mechanical systems where water solubility and paint compatibility are essential. This product contains no silicone and will not adversely affect paint finishes.

Lubriplate® GPO Motor Oil SAE 10W-30, Motor Oil is an engine oil developed for use in four-stroke cycle diesel engines designed to meet 2007 and later EPA on-highway exhaust emissions standards. It is specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs), diesel oxidation catalysts (DOCs) and selective catalytic reduction (SCR) systems. It is backward serviceable for use in pre-2007 diesel engines and may be used in mixed fleets with both diesel and gasoline-fueled vehicles.

Camie® 500 General Purpose Spray Adhesive provides temporary or permanent bonds.

WINTREX® HD heat transfer fluid is an inhibited ethylene glycol designed for use in hydronic systems for freeze and corrosion protection. WINTREX® HD is designed to extend fluid life where service temperatures are higher and the likelihood of thermal degradation is greater. It is sometimes also used in less demanding applications because the heavy duty inhibitors last longer, and maintenance requirements can be reduced.

POLYTECH® Neoprene Blend Foam (PNB-F41) is a Neoprene/EPDM/SBR closed cell blend foam with good resistance to weather, oxidation, and ozone. This is an economical closed cell foam for a variety of uses.

SERVICE PRO® Premium Full Synthetic SAE 0W-16 Motor Oil is a premium synthetic motor oil specifically formulated to deliver increased fuel economy. The science of using synthetic base stocks in SAE 0W-16 viscosity grade translates into outstanding engine protection when operating in both high and low temperature environments. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

Cutting and Grinding Fluids CG 4230 is a rust preventative formulated to protect parts stored indoors for up to 1 year. The product has good water displacing characteristics (CG 4230 will rapidly separate from water and displace moisture from metal surfaces after machining operations or after alkali cleaning), is non-staining, and is practically odorless. CG 4230 is a solvent cutback which works by depositing a thin, transparent, polar film over the parts after the solvent evaporates. The coating is not easily fractured and possesses residual protective characteristics, even if part of the compound is wiped or rubbed from the metal surface. Due to surface-active characteristics in CG 4230, the coating will creep over uneven or unclean surfaces to insure a continuous film. It can thus be used on porous metals and parts with deep crevices, insuring 100% coverage.

Camie® 393 Headliner, Trim & Laminating Adhesive is formulated to bond substrates that require either high bond strength and/or need elevated temperature resistance. Camie® 393 also exhibits excellent green strength and water resistance. Both substrates to be bonded must be sprayed. These substrates can be joined as quickly as 10 seconds - 2 minutes depending on atmospheric conditions; make sure adhesive is tacky to the touch. Maximum open time before bonding is 15 minutes depending on how porous of a substrate is being used; make sure the adhesive is still tacky before bonding. If the adhesive has gone dead, reapply before joining the two substrates together. It is an Aerosol Adhesive.

SERVICE PRO® API SP-RC ILSAC GF-6A 5W-30 are high performance synthetic motors oils specially formulated to meet the stringent lubrication requirements of today's engines. These oils provide maximum protection against rust, corrosion, acid formation, sludge and varnish while yielding exceptional oxidation and low temperature performance. The API SP Resource Conserving specification protects against low speed pre-ignition and chain wear found in newer modern engines, while maximizing fuel economy. Always follow manufacturer’s recommendations for viscosity grade and API Service Category.

Mighty Lube® Type MX Lubricants are heavy duty, anti-wear lubricants, which have been formulated to withstand the most extreme industrial conveyor applications. The use of the Mighty Lube Systematic Lubrication will result in a conveyor system that is protected against wear and corrosion over temperature ranges of -55°F to 550°F.

Mighty Lube® Type MX-HT Lubricants is a heavy duty, anti-wear lubricant, which has been formulated to withstand the most extreme industrial conveyor applications. The use of Type MX-HT lubricant will result in a conveyor system that is protected against wear and corrosion over temperature range exceeding 450°F with limited protection up to 1200°F.

Camie® 575 Screen Printers’ Flash Cure Adhesive Low VOC is recommended to the textile screen printer who is using a flash curing technique on the ink. Camie® 575 is particularly suited for the rapid heat cycles encountered in this process.

Camie® 563 High Strength Fast Tack Spray Adhesive Low VOC is a transparent and pressure sensitive. It provides instant tack, is repositionable, has a web-spray pattern and offers the user a low soak in with a high bond strength. Due to this product’s low soak-in characteristics and high “green strength”, it is especially recommended when bonding polyethylene film to drywall, brick, and concrete block. It is also excellent for use in partitioning and isolating construction areas.

Mighty Lube® Type GPC is a pure synthetic, water soluble high temperature conveyor lubricant specially formulated for the lubrication of chains, rollers and bearings of automotive paint line conveyors and other mechanical systems where water solubility and paint compatibility are essential. This product contains no silicone and will not adversely affect paint finishes.

Valvoline ANTI-WEAR HYDRAULIC OILS VG 32 have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives.

K-FLEX® K 42-N is an open cell Flexible Elastomeric Foam designed for sound absorption. It combines excellent acoustic performances and insulation characteristics.

Cutting and Grinding Fluids CG 5360 is a unique combination of extreme pressure agents, corrosion inhibitors, and ester additives that provide excellent cutting and grinding performance in multiple operations on all types of steels, including stainless. This transparent oil enables the operator to better observe the work in progress, and it has very low misting and odor characteristics as well.

Mighty Lube® Type CSM-2 is a heavy duty, anti-wear lubricant, which have been formulated to withstand the most extreme industrial conveyor applications. The use of the Mighty Lube Systematic Lubrication will result in a conveyor system that is protected against wear and corrosion over temperature ranges of 450°F with limited protection up to 1250°F.

Lubriplate® No. 35 Soluble Oil ISO Grade 46, Mineral oil is a soluble oil concentrate. This product was designed to be extended with water for the machining and grinding of virtually all metals except magnesium.