TBA Protective Solutions ECP 537 Static Dissipative High Temperature Paint

Enhanced TDS

Chemical Family: Acrylics & Acrylates,
Mixtures & Blends
Product Type: 1K (1 component) Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings
Composition: Phenylmethyl polysiloxane resin/acrylic resin/conductive mineral additive/titanium dioxide.

Ready-to-Use Product Features: Anti-Static,
Corrosion Resistant,
High Temperature Performance,
Static-Dissipative
Overview: ECP 537 Static Dissipative High Temperature Paint

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Packaging & Assembly
Electronics Coatings
Application Area: Electrical Components
Application Method: Brush,
Spray
Applications: Oven interiors, flow solder machines etc.

Physical Properties

Application: Surface preparation: All contaminants including mold release, grease and dirt must be removed. A suitable primer may be necessary on certain substrates.

Mixing: Some settling may occur in the can so care must be taken to mix in all solids. Should any dilution be necessary ECP 537 thinners should be used.

Application: ECP 537 can be applied either by a conventional spray gun (40 - 50 psi pressure) or by brush coating.

Stoving: Allow parts to air dry for a minimum of 24 hours then oven cured at a temperature of 100 celsius for approximately 10 minutes.

Precautions

Highly flammable. Keep away from heat, sparks and open flames. Keep all containers closed when not in use.
Use under well-ventilated conditions. Personal respiratory protection should be worn under spraying conditions. Such deviced must be used in accordance with the manufacturer's instructions.
Avoid contact with skin. Wear protective gloves and clothing. Wash thoroughly with soap and water after use. If accidentally swallowed seek medical advice.