Products in Adhesives & Sealants: Anaerobic Adhesive

Turbo Fuse 16 HS green wicking grade threadlocker is a fast curing, Green, medium strength, wicking grade, anaerobic thread-locking compound for bonding and sealing threads, and pre-assembled parts. This threadlocker is highly resistant to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock 17 SC is a high strength, slip fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock 17 FC is a fast curing, high strength, slip fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock Series 14 is a fast curing, high strength, permanent, anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassemble with heat and tools.

Turbo Lock Series 11 is a fast curing, removable, medium strength, general purpose anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with hand tools.

Turbo Seal Series 51 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces. Provides resistance to low pressure immediately after assembly of flanges.

Turbo Lock Series 15 is a fast curing, large bolt, high strength, anaerobic thread-locking compound for bonding and sealing threads. Prevents rusting of threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with heat and hand tools.

Palm Labs Adhesives Bearing and Shaft - Series 17 is a fast curing, high strength, slip fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Palm Labs Adhesives Bearing and Shaft - Series 17 - GP is a fast curing, high strength, general purpose, press fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Seal Series 50 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces and will flex with minor flange movements. Provides resistance to low pressure immediately after assembly of flanges.

Palm Labs Adhesives Bearing and Shaft - Series 17 - HT is a fast curing, high temperature, high strength, high viscosity, press fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to high heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock Series 10 is a removable, fast curing, low strength, anaerobic thread-locking compound for bonding and sealing small screw threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Easy disassembly.

Turbo Lock Series 13 is a high temperature, high strength, permanent, anaerobic thread-locking compound. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with high heat and hand tools.

Turbo Lock Series 11 OR is a fast curing, removable, medium strength, oil resistant, primerless, general purpose anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with hand tools.

Turbo Seal Series 53 gasket makers can be used to replace conventional gaskets in a range of demanding industrial applications. The gasket maker compound cures in the absence of air between close fitting surfaces and will flex with minor flange movements. It is designed to prevent movement in rigid assemblies, for example flange assemblies.

Turbo Seal Series 52 is an anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting surfaces. Provides resistance to low pressure immediately after assembly of flanges.

Turbo Lock Series 13 OR is a high temperature, high strength, permanent, oil resistant, anaerobic thread-locking compound. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals,disassembles with high heat and hand tools.

Palm Labs Adhesives Bearing and Shaft - Series 17 - HS is a fast curing, high strength anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Palm Labs Adhesives Bearing and Shaft - Series 17 - OR is a fast curing, high strength, oil resistant, close fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock Series 12 is a fast curing, medium to high strength, permanent, anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals, and is good in a chemical environment. Disassembles with heat and hand tools.

Palm Labs Adhesives Bearing and Shaft - Series 17 - ED is a fast curing, yellow, medium strength, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Fuse 16 LB green wicking grade threadlocker is a fast curing, Green, medium strength, wicking grade, anaerobic thread-locking compound for bonding and sealing threads, and pre-assembled parts. This threadlocker is highly resistant to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Turbo Lock Series 16 is a fast curing, medium strength, wicking grade, anaerobic thread-locking compound for bonding and sealing threads, and pre-assembled parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with heat or hand tools.

Turbo Lock Series 11 HT is a fast curing, removable, medium strength, high temperature, anaerobic thread-locking compound for bonding and sealing threads. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals. Disassembles with hand tools.

Hernon HASA® 722 is a single-component, anaerobic, structural adhesive designed for bonding rigid assemblies. HASA® 722 cure is accomplished when mating surfaces including metal, glass and ceramics are joined together. Accelerated cures are possible with the application of primers or by a short, low temperature heat cycle. Upon cure, HASA® 722 is a highly crosslinked thermoset plastic with excellent properties over a wide range of conditions.

Hernon HASA® 716 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. HASA® 716 cures when it is confined between mating surfaces. Hernon® Primer 50 accelerates the cure.

Sonlok® 3641 is a medium strength anaerobic bearing compound for continuous working temperatures up to 300°F.

SONLOK® 3609 is a fast curing, medium strength anaerobic retaining compound for continuous working temperatures up to 300°F. SONLOK® 3609 retaining compound is ideal for gap distances up to 0.005” diameter.

SONLOK® 3603 is a high strength anaerobic retaining compound for cylindrical fitting parts. This adhesive designed to develop bonds even on surfaces lightly contaminated with oil. SONLOK® 3603 retaining compound is a single component anaerobic adhesive, which develops high strength rapidly when confined in the absence of air between close fitting metal surfaces.

MXLOC® PIPE SEALANT 13577 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

72 Red™ is a very high viscosity, thixotropic, high strength threadlocker. It has excellent high temperature resistance (up to 400F) and can be used on large fasteners, where a high break away torque is desired. Because it is high in viscosity, It will not run out of the joint before it cures and can be used in applications requiring good gap filling abilities.

INSTAbond® 403 Grade D is a high strength medium viscosity threadlocking compound designed for intermediate sized threaded fasteners. It offers moderate chemical resistance and slow fixture time for items requiring adjustment. Parts can be separated using hand tools.

Taoka Chemical RP-7X is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

Taoka Chemical W-50 is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

MXLOC® PIPE SEALANT 13542 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

Taoka Chemical RP-3X is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.