Products in Water Treatment Additives

MultiTech Corrosion Inhibitor A is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

MultiTech Difunctional B is a product that is specially developed for the formation of active chlorine dioxide generated by mixing powdered inputs that are indicated for higher flows and systems of medium or high complexity. It is used in applications that demand safety, metering accuracy, and reliability. This product is a blend of water-soluble salts, making it 100% soluble, and easy to handle and apply. It also has a low operating cost.

DiTech Coagulant is widely accepted as the preferred polyaluminum chloride for cost-effective improvement of finished water quality. As a coagulant, it enhances filter performance, potentially eliminates the need for pH adjustment with alkalis, and decreases sludge residuals. It meets the specifications of American Water Works Association Standard B408-18 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dosage of 250 mg/L.

IAM Oxidizing Agent is an enzyme that presents in the cells of plants, animals and aerobic (oxygen requiring) bacteria. It promotes the conversion of hydrogen peroxide, a powerful and harmful oxidizing agent, into water and molecular oxygen. It is widely used for removal of H2O2 in textile industry, semiconductor and electronics factory. It saves time and energy and is environmental-friendly.

DiTech Multifunctional C is an economical form of reactive sulfur that is typically a light-yellow colored solution with the accompanying odor of rotten eggs. Hydrogen Sulfide (H‚‚S), a toxic gas, is evolved upon contact of Sodium Hydrosulfide with acids.

IAM Coagulant A is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

DiTech Rheology Modifier is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals.

IAM Coagulant B is a highly viscous liquid solution that consists of high- to very high-molecular-weight polymer components. This amino-methylated polyacrylamide is an effective tool in wastewater treatment. It functions as a coagulant aid for flocculants in clarification processes and as a drainage and retention aid in sludge dewatering processes.

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

STEPANQUAT® 200 is a quaternary used for odor control in water reclamation. Stepanquat 200 is miscible with soft and hard water (400 ppm caco3) in all proportions, as well as with alcohol and acetone in all proportions. Stepanquat 200 is insoluble in ether, benzene, petroleum, and/or chloroform. Stepanquat 200, at the recommended use level, does not contribute to the corrosion of metal compounds.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

SILFOAM® SE 1060 is a versatile antifoam emulsion with a high concentration of emulsifier. It offers excellent resistance to alkalis and acids, making it suitable for various applications where pH is a critical factor. Its wide range of uses makes it a highly adaptable solution.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

PULPSIL® 822 E is a medium-viscous, highly effective silicone antifoam emulsion developed specifically for use in pulp mills. It is characterized by its very good knock-down efficiency, long-term efficiency, compatibility, and excellent stability. PULPSIL® 822 E acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

DYNOL® 607 is a high-performance, non-ionic superwetter capable of delivering the exceptional equilibrium and dynamic surface tension reduction synonymous with the Dynol name. It also boasts improved ease-of-incorporation and formulation compatibility compared to the more hydrophobic DYNOL® 607 Surfactant. Furthermore, comparative wetting performance tests have confirmed that DYNOL® 607 Surfactant is a valuable replacement for conventional fluorosurfactants and offers a cost-effective, non-persistent alternative to emerging fluorosurfactant technology.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

TMT 15® is an environmentally friendly solution used to separate and remove heavy metals from wastewater generated in numerous industrial applications. It enables compliance with strict environmental regulations and offers high effectiveness in various applications. TMT 15® is non-toxic, non-hazardous, has good ecological properties, and can be handled safely without unpleasant odors. It benefits from experienced application and technical competence.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

TEGO® Antifoam KE 600 is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

DYNOCEL® 900 is a 20 x 50 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOCEL® 600 is a 14 x 28 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

TEGO® Antifoam KE 600 EC is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

DYNOCEL® 900 is a 28 x 48 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

USALCO Dry Aluminum Sulfate (Iron Free Grade) is manufactured using a state-of-the-art process and high-quality raw materials, which ensures that the product meets the highest quality standards. USALCO also produces dry alum in various other grades (low-iron and FCC-grade) and in specialty granular sizes to satisfy even the most difficult applications. USALCO's dry alum is used in water treatment, colors and dyes, leather tanning, papermaking, and many other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 150 mg/L.