Products in Polymers & Resins: Spray Lay-up

espol™ 12.51 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable, making it ideal for laminates that require very fast curing. It provides excellent mechanical strength, rigidity, and long-term durability.

espol™ 12.23 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin specifically designed for non-critical and general-purpose applications. It is thixotropic by nature and has anti-sagging properties. It is designed for hand laminating, spray-up, and casting applications.

espol™ 30.01 is a pre-accelerated isophthalic polyester resin that rapidly wets out reinforcements. espol™ 30.01 has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

espol™ 17.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for rooflite applications and offers excellent light transmittance and weather resistance. Additionally, it provides excellent mechanical strength and rigidity, as well as long-term durability. This resin is commonly used in the production of greenhouses, translucent roofing, domes, and architectural panels.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.

espol™ 41.00 is a non-accelerated isophthalic neopentyl glycol (ISO-NPG) polyester resin suitable for aggressive marine applications. The resin has been approved by the IRS (Indian Registrar of Shipping) for usage on ships and other marine transport vehicles. It has been specifically formulated for resistance to seawater, offering superior osmotic stability alongside excellent mechanical properties.

Crystic® Laminating Resin 406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a gel time of 18 minutes and Lloyd's approval. This product is suitable for use in marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 2.420PA is a long gel time, low styrene emission, pre-accelerated orthophthalic polyester resin. This laminating resin has a 45-minute gel time and low exotherm, making it suitable for the molding of large structures and thick laminates. Crystic® Polyester Resin 2.402PALV is the low-viscosity version of this product. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications.

espol™ 12.20 is a non-accelerated orthophthalic clear polyester resin formulated with medium reactivity for specialized casting processes. It has been specifically designed for casting and cold press molding applications associated with quartz agglomerated blocks and sheets. End products made using espol™ 12.20 have excellent strength, rigidity, water resistance, and long-term durability.

Crystic® Laminating Resin 4252.4 TEPA V01 is an orthophtalic, pre-accelerated, low styrene emission (LSE), thixotropic unsaturated polyester resin. This product can be used for spray application or for contact molding when fast mold turn-around or thick laminates are required. It is an incredibly versatile laminating resin, and its excellent mechanical properties make it ideal for bonding on acrylic sheets for sanitary use.

espol™ 31.00 is a non-accelerated terephthalic acid-based polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and exhibits good mechanical and electrical properties, along with good chemical resistance compared to general-purpose resins. It is designed for hand laminating, spray-up, and casting applications.

Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.

espol™ 39.00 is a novalac-based epoxy vinyl ester resin designed to provide exceptional mechanical and chemical resistance properties at high operating temperatures. Its novolac-based backbone imparts it with excellent resistance to aggressive chemicals and oxidizing environments. It brings in enhanced durability, showing excellent long-term retention of strength and toughness at elevated temperatures.

Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces. 

espol™ 29.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a superior grade, especially for automotive applications intended for a Class-A surface finish. It is designed for hand lamination, spray-up, and casting as manufacturing processes. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials.

Crestamould® T29 Extrudable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and it can be extruded up to a thickness of approx. 15mm (0.6”). It provides a homogenous substrate that prevents print from the underlying structure.

espol™ 27.01 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is specially formulated for use in the dough molding impregnation (DMC) process and is highly reactive. It is suitable for products that require good end-product manufacturing efficiency and finish. It is designed for hot mold processes such as SMC and DMC with good catalyzed stability.

Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.

Crestafire® Bio P1-8001 is a versatile bio-resin with excellent fire, smoke, and toxicity properties and good mechanical properties, due to which the product can be used in the most demanding FST applications in the railway, building and construction, and other public transport industries. It is designed for applications where fireproof performance and natural origins are key to the final product.

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 2.406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin with low styrene emission. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a 16-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications.

espol™ 12.10 is a non-accelerated orthophthalic polyester resin with low viscosity that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications. This resin is formulated as an extra-clear grade, providing excellent mechanical strength, rigidity, and long-term durability. It is designed for hand lamination, spray-up, RTM, and casting applications.

espol™ 19.00 is a non-accelerated orthophthalic polyester resin suitable for the resin transfer molding (RTM) process. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable. It is designed for laminates that need a very fast cure under closed-mold conditions.

Crystic® Polyester Resin 990PA is a pre-accelerated, low-viscosity, modified orthophthalic polyester resin containing styrene and methyl methacrylate. It was developed for use as a filled system in reinforcing ABS acrylic-lined baths, sinks, and shower trays and is designed for spray laminating. This product has a 6-minute gel time.

Crystic® Polyester Resin 1124PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give a sufficient pot life for contact molding using Andonox® KP9 at normal ambient temperatures. It has been formulated to give a rapid cure time while retaining a usable pot life and a normal peak exotherm temperature. For an extra-rapid cure, the use of acetoacetonyl peroxide (Andonox® PD40) is recommended.

Crystic® Polyester Resin 2.446PA is a pre-accelerated, thixotropic, spray viscosity, orthophthalic polyester resin with low styrene emission. This laminating resin's rapid wet-out, low exotherm, and fast hardening characteristics make it ideal for rapid mold turnaround. It has a 26-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications. A low-viscosity version of this product is also available.

espol™ 30.00 is a non-accelerated isophthalic polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

espol™ 12.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that has been specifically designed for non-critical and industrial applications. However, it is not suitable for boat construction, chemical resistance, or moldings in contact with food products.

espol™ 38.05 is a non-accelerated, non-thixotropic vinyl ester resin that rapidly wets out reinforcements. It exhibits excellent resistance to a wide range of corrosive chemical environments at room and elevated temperatures. It is specifically designed for pultrusion applications. Due to its high elongation and flexibility, espol™ 38.05 can also be used in tooling and mold making.

Crystic® Thixotropic Resin LS 451PA is a pre-accelerated thixotropic resin. It is suitable for brush or spray application in the marine industry or general molding market. This product has reduced styrene emissions, typically 20 - 30% lower than conventional lower styrene resins. It has Lloyd's approval but is also suitable for use in building and construction, transportation, and industrial applications. This product has a 20-minute gel time.

Crystic® Laminating Resin 1122PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give sufficient pot life for contact molding using Andonox® KP9 catalyst at normal ambient temperatures. It is suitable for a wide range of applications. This product has been specially formulated to give rapid wetting and impregnation of reinforcements and to aid in the elimination of air. It is almost colorless when cured.

espol™ 12.12 is a non-accelerated orthophthalic clear polyester resin formulated to be medium reactive with low exotherm. It also offers superior impact and crack resistance. It has been specifically designed for casting and cold press molding applications associated with cultured marble and marble chips. Agglomerated marble made using this resin has excellent strength, rigidity, water resistance, and long-term durability.

Crestamould® RTR 4010PA is a new, improved rapid tooling resin which incorporates better handling properties, lower viscosity, improved shrinkage control and is catalysed with standard MEKP catalyst. It is a thixotropic, filled, low profile resin which helps to achieve faster mold making and eliminates surface distortion. This product was formulated for hand-lay mold making applications.