Products in Polymers & Resins: Hand Lay-up

DISTITRON® 100 CV2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through hand lay up and spray up method.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

NORESTER 912 TPAV is a Orthophthalic lamination resin, Thixotropic and pre-accelerated product, Resin with low styrene emissions, Several versions available ( White tint, Different gel times ),

NM ME 585 is a low viscosity, room temperature curing solvent free epoxy resin with all-round properties, i.e. modeling and production of molds.

Resin-SA Pty Ltd SHCP 3254 BQTN-WS is a isopthalic resin which is used for spray up /hand laminating.

Norsodyne® 2625TI - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

AOC's Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes.BENEFITSInternationally RecognizedVipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc.Corrosion ResistanceThis resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Lerpol 4388 is a DCPD high HDT. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

DISTITRON® 1629 NT - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Polydyne® 6043 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

Havelpol 4-UV + pure Polyester resin is light stabilized polyester resins containing styrene and methyl methacrylate. Its use is recommended in the manufacture of maximally clear manually GRP-produced film or casting and potting art objects. Fully cured laminates made from Havelpol 4 and powder associated mat of glass fibers "E" in quality for the production of films can exhibit light transmittance of more than 80%. They exhibit excellent resistance to weathering and stable appearance even after prolonged exposure.

Sicomin SR 1700 / SD 280x / 7820 / 2802HT is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. It is high mechanical performance epoxy system use to long working time with a variety of reinforcements such as glass, aramid and carbon.

Epovia Optimum® KRF-2000SE is brominated vinyl ester resin for hand lay up-filament winding with low color, low foaming, fast cure and it is generally used in building and construction, chemical industry, industrial sector, railway sector applicatons.

NORSODYNE® P 44070 L - Unsaturated polyester resin in styrene,Isophthalic. It is used as general purpose in hand lay up and spray up,pultrusion method.

NORSODYNE® H 36238 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks,pools through hand lay up and spray up method.

LAM-125 / LAM-239 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Ilkalem AS PV-300T is Bisphenol-A epoxy vinylester thixotropic resin for GRP applications.

Norsodyne® HG-5689BTY - thixotropic, preaccelerated. It is generally used in industrial sector applicatons.

DISTITRON® 135 SX - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

LAM-135 / LAM-226 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

DISTITRON® 429 BSX25Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats through hand lay up and spray up method.

EPOLAM 2022 is a Variable reactivity by addition of an accelerator Tg ~80°C

Resin-SA Pty Ltd RES GP 005 WTA Black is a general purpose ortho resin black pigmented hand laminating.

Norsodyne® UPE-1679ENC - thixotropic, preaccelerated, with LSE system, good chemical, heat and water resistance. It is generally used in marine applicatons.

NORSODYNE® FIREBLOCK H 81381 TFA - Unsaturated Polyester Resin in styrene filled,without halogeneous component and antimony trioxide. It is used as general purpose in hand lay up and spray up method.

ENYDYNE® H 89295 FA - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Lerpol 902 is a Pure Vinylester. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

AOC's Vipel F701 Series resins are high molecular weight, two-stage isophthalic, unsaturated polyester resin with the wet out, cure and handling characteristics of general purpose resins.They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below including the high viscosity base resin, Vipel F701-FHG-00.BENEFITSCorrosion resistanceAOC's Vipel F701 series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.

LAM-125 / LAM-224 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

DISTITRON® 1629 XYQ - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Enchuan 6120TWA contains thixotropy, wax and accelerator. 6120TWA is a general purpose resin, suitable for hand lay-up application in producing bathtubs, water tanks, and other similar FRP products.

Fiberglass (A/Asia) Sales Pty 6060 LSE Resin is a promoted orthophthalic laminating resin exhibiting low styrene emission. This grade shows excellent glass fiber wet out and is designed for use in general spray depositing and hand lay up. Long green time, low exotherm and low color in thick sections make this resin ideal for large structures or multiple laminates. 6060 LSE contains an ingredient which reduces styrene emission during lamination and in the period prior to gelation. Low styrene emission resins alone will not enable the molder to comply with the recommended atmospheric styrene levels, but with appropriate ventilation, these resins may assist in reducing the level of styrene in the workshop to which workers are exposed. Tests carried out to TP 261.2 (Interlaminar adhesion) show no loss in adhesion after one day delayed lay-up.

Eager Polymers EP4117 is a room temperature curing, rigid, translucent, polyester resin for use with fiberglass fabric. It is an air-inhibited resin so additional layers can be applied without sanding between layers. Consequently, EP4117 is often called bonding resin or laminating resin. Successful applications include boat-building, auto body construction, mother mold production and other reinforced plastic parts by hand lay-up or chopper gun.