Products in Polymers & Resins: Hand Lay-up

NORSODYNE® H 44281 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Norsodyne® G-713BT - thixotropic, preaccelerated, high grade yacht, high strength, impact resistance, lloyd's approved. It is generally used in marine applicatons.

AOC's Vipel F764 Series is a high cross-linked isophthalic polyester resin.AOC's Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels.BENEFITSUL RecognitionAOC's Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III.Corrosion ResistanceVipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Aekyung Chemical LS-123 is an ortho type UPR.

Epovia Optimum® KRF-1001MVHV is bisphenol-A epoxy based vinyl ester resin with low color, chemical resistance, low foaming, fast cure and it is generally used in building and construction, chemical industry, industrial sector applicatons.

LAM-125 / LAM-226 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Norsodyne® 3310W has general purpose, excellent water resistance, promoted and waxed version of Norsodyne® 3310. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polydyne® 6084 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Rhino Linings USA, Inc. 1319 Resin is a Press Molding Resin Modified for Improved Flexibility and Adhesion. Press molding epoxy system, modified for added flexibility and adhesion. All listed hardeners cure very quickly at standard process temperatures (160°F – 210°F).

Norsodyne® SG-550 - for acrylic backup. Main applications areas are home and domestic applications etc.

ENYDYNE® H 66132 TAP - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Norsodyne® G-613BTR - thixotropic, preaccelerated, fast hardness build up, good mechanical property. It is generally used in marine applicatons.

Norsodyne® G-689STY - thixotropic, preaccelerated, fast cure, crack resistance. It is generally used in industrial sector applicatons.

NM Laminering 650 is a two pack, solvent‐free, epoxy laminating system with a high TG and very high strength values. Wetting and adhesive properties are very good to all kind of fibers.

Polydyne® 7215 - low viscosity, high reactivity for RTM process. Main applications areas are composites, mass transports etc.

AOC's Vipel F007 is a low VOC, bisphenol A, epoxy-based vinyl ester resin dissolved in styrene.BENEFITSVersatileThe Vipel F007 Series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.Wide formulating capabilities allow for use in many processes and for optimization of cost/performance.Corrosion ResistantRefer to AOC's "Corrosion Resistant Resin Guide under product F007" for corrosion resistance information. For questions regarding suitability of a resin to any particular chemical environment, contact AOC.

Norsodyne® 2116F - thixotropic, promoted and non-waxed, food grade, lloyd's approved. Main applications areas are industrial sector, marine etc.

Polydyne® 6010 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

NORSODYNE® S 81302 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.

NORSODYNE® S 83111 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

NORSODYNE® H 44173 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats,pipes and tanks through centrifugal casting,filament winding,hand lay up and spray up,injection molding,rtm,press and vacuum molding,pultrusion method.

The Vipel F085 series is an epoxy novolac vinyl ester resin dissolved in styrene. 085 series is ideally suited for applications where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.BENEFITSCorrosion ResistanceThe epoxy novolac backbone chemistry provides resistance to acids and bases and has superior resistance to many organic solvents. The F085 series is generally resistant to liquids and vapors at higher temperatures than standard bisphenol-A epoxy vinyl ester resins.The F085 series is well suited for use in the field of chlorine-alkali electrolysis. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment, contact AOC.Mechanical PropertiesThe F085 series is suitable for moldings that are subjected to particularly high static and dynamic loads. It is resistant to internal stress cracking under high loading.VersatileSuitable for various fabricating methods such as hand lay-up, filament winding, etc.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

DISTITRON® VEef 220 STZ - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats through hand lay up and spray up method.

Resin-SA Pty Ltd SHCP 268 BQTN-WS-FL is a general purpose ortho resin for which is used for spray up/ hand laminating.

Norsodyne® G-650BY - preaccelerated, lining. It is generally used in marine applicatons.

NORSODYNE® H 15238 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® G-650ABY is general purpose orthophthalic resin for hand lay up and spray up with fast cure and it is generally used in industrial sector applicatons.

AOC's Vipel F282 series resins are high molecular weight, bisphenol-A fumarate, unsaturated polyester resins. Vipel F282 series has an excellent shelf life and is ideal for filament winding and spray-up applications. One unique version is Vipel F282-ZZZ-00 which is the powdered alkyd product that can be shipped abroad and blended locally with styrene and other monomers. Please see the Vipel F282-ZZZ-00 product data sheet for additional information.BENEFITSCorrosion ResistanceAOC's Vipel F282 is designed to make parts for a broad range of chemical environments such as acidic, bleach, hydrogen peroxide, oxidizing media and caustic.Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information. For questions regarding suitability of a resin to any particular chemical environment contact your AOC representative.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up and filament winding.It is the fabricator's responsibility to be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing, laminate should be washed with soap and water and then rinsed. winding, etc.