Products in Polymers & Resins: Hand Lay-up

Biresin® CR172 is an epoxy resin system designed for the hand lay-up process and injection processes and is especially for applications when a very high thermal resistance is needed.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Lerpol RS 10 FRN is a filled resins, tixo, preaccelerated suitable fo HLU. It is specifically designed for civil transportation ships interior parts.

Enydyne® H 650 - preaccelerated, medium viscosity, low shrinkage, thixotropic, high reactivity with cure indicator. High solids with good wettability. Main applications areas are composites, marine, mass transports etc.

Sika RSF 816 G can be combined with natural fibers and fabrics such as flax, hemp or cellulose based materials fo greener composite solutions.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

Ilkalem AS P-192 TA is ortho unsaturated polyester resin for GRP applications.

Lerpol 302 is a ISO-NPG high performance resin. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

AOC's Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes.BENEFITSInternationally RecognizedVipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc.Corrosion ResistanceThis resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Biresin® CR132 FR is a fi lled epoxy resin system suitable for the production of fi re resistant high performance fiber reinforced composites with thermal properties up to 150°C.

LAM-135 / LAM-237 has Medium viscosity for good wet out of all synthetic composite fabrics and core materials.

Ilkalem AS PV-300 is Bisphenol-A epoxy vinylester resin for GRP applications.

The Biresin® CR84 system is a lightly thickened epoxy resin system having a pot-life up-to 10 hours and a reduced tendency to drip or spray from reinforcing fibers during processing. The resin system can be fully cured at 80°C.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Ilkalem AS IR-110T is ISO thixotropic unsaturated polyester resin for GRP applications.

EASYLAM® LSE - Unsaturated polyester resin in styrene,special. It is used as general purpose in hand lay up and spray up method.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

Ilkalem AS PV-200 is Bisphenol-A epoxy vinylester resin for GRP applications.

EPOLAM 2500 meets the requirements of AIRBUS HELICOPTERS specifications ECS 2196 Rev.B for interior fittings manufacture and repair.

EPOVIA RF-2000SEM is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

EPOVIA RF-2050SE is Chlorendic anhydride (HET acid) based unsaturated polyester resin. Main Applications areas are Building and Construction,Chemical Industry,Industrial sector etc.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

NORSODYNE® H 16239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

Resin-SA Pty Ltd RES IS006- UTA is a isopthalic resin which is used for spray up /hand laminating.

Enydyne® GP-210A PT - thixotropic, preaccelerated. Main applications areas are industrial sector, marine etc.

Polydyne® 6023 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Norsodyne® H-370T - iso-NPG resin for hand lay up and infusion, good chemical and water resistance. It is generally used in marine applicatons.

Norsodyne® VUP-3518T - tooling resin, thixotropic, excellent impact resistance. It is generally used in industrial sector applicatons.

Sicomin SR GreenPoxy 28 / SD 3304 is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. SR GreenPoxy 28 Epoxy resin is produced with 28% of carbon originating from biomass. The combination of SR GreenPoxy 28 with SD 3304 hardener yields a low viscosity epoxy resin system of medium reactivity, with outstanding wetting-out properties on glass, carbon and aramid fibers. Due to its excellent impregnation properties, it is a preferred resin for the production of highly resilient composite fiber structures using filament winding technique, hand lay-up or pultrusion.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

EPOVIA KAYAK KF3202L Series - Elastomeric BPA-epoxy vinyl ester resin. Main Applications areas are Aeolian,Aeronautical,Agrochemical,Agrobusiness,Automotive,Building and Construction,Composites,Consumer Products,Home and Domestic Applications,Industrial sector,Marine,Mass Transports,Railway Sector etc.