Products in Polymers & Resins: Compression Molding

MITO® E-GO™ RES-1 is a laminating epoxy resin powered with our flagship product MITO® E-GO, a modified graphene oxide additive that makes graphene easy to use and accessible to all.   Designed for Compression molding applications for high-performance sporting goods, it boosts the performance of fiber-reinforced applications, resulting in significantly improved durability while maintaining a lighter weight. Secondary properties such as damping, thermal conductivity, and resistivity are also expected.   This product is sold as a kit consisting of 1 gallon of Resin loaded with 1% of MITO® E-GO® and 1 quart of MITO® standard accompanying hardener. Graphene Council Mito Materials provides in-resin graphene additive for composites Mito Materials provides in-resin graphene additive for composites

LRBG Chemicals USA MF 415 is primarily designed for paper lamination but can also be used to impregnate cloth, synthetic, or glass fibers. It serves as a water-resistant thermosetting binder and in compression wood flour molding to make school furniture. Additionally, this resin has been used successfully as a plaster modifier to increase strength and environmental resistance.

LRBG Chemicals USA MF 812 is a spray-dried melamine resin powder designed as a binder for granulated wood and wood flour to produce high-flow molding composites. This resin is light-colored, and it demonstrates excellent resistance to color change upon UV exposure.

Ecomass® Compound 3602BI54 Nat is a filled polyethylene (MDPE) compound that is used in various applications. The compound is processed through extrusion, making it suitable for manufacturing purposes. It is available in the form of pellets, allowing for easy handling and integration into different production processes.

Ecomass® compound 3608TU96 is a tungsten powder-filled polyethylene compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection and compression molding grade is known for its high specific gravity and rigidity. Additionally, it is a nontoxic thermoplastic lead substitute.

NORSODYNE® M 28077 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

Toray RS-50 is a toughened low viscosity epoxy RTM resin. It features a long 4-hour pot life and a low minimum viscosity for excellent RTM and VARTM processing. It can also be used in wet winding Applicationss. 177°C (350°F) Curing Epoxy RTM Resin

Sicomin SR 1660 / SD 1305 is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. This systems developed for high service temperature tooling from 120°C up to over 200°C continuously depending on the chosen hardener.

DISTITRON® 278 - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding method.

Toray EX-1545 is a 2-part highly modified, tough cyanate ester resin formulated to have extremely low viscosity at room temperature. The low viscosity allows RTM processing with minimal heat to the resin, which extends resin pot life and mold filling time for difficult and/or large RTM’d structures. EX-1545 displays both excellent mechanical and thermal properties in addition to low moisture absorption. Finally, the material is unique in that it develops full mechanical properties from its initial 177°C (350°F) cure. 177°C (350°F) Curing Toughened Cyanate Ester for RTM Applicationss

Toray EX-1510 is a highly modified two-part toughened cyanate ester resin formulated to have extremely low viscosity at room temperature. Its viscosity allows resin transfer molding (RTM) to take place without the Applications of heat to the resin. This feature provides long resin pot life and mold filling time for difficult and/or large RTM’d structures and helps increase manufacturing efficiency and reduces waste. EX-1510 displays excellent mechanical and thermal properties in addition to low moisture absorption. Finally, the material is unique in that it develops full mechanical properties from its initial 177°C (350°F) cure. A freestanding post cure increases the heat resistance.

Maverick Corporation AFR-PE-4 is a high-temperature thermosetting polyimide resin with service capability up to 343°C (260°C wet). Developed by the Air Force and commercialized by Maverick, it is intended for use in the highest temperature applications for structural composites. AFR-PE-4 does not contain the toxic diamine 4,4’-methylenedianiline (MDA) or any other mutagenic or carcinogenic components. Although it is most suited for autoclave processing, its chemistry also allows for the use of compression molding. AFR-PE-4 is available as a PMR-type resin solution from Maverick Corporation, or as a prepreg from Renegade Materials Corporation.

SKYBOND® 703 is a heat reactive aromatic resin which can be thermally cured to a crosslinked polyimide. It is specifically designed for structual, and specialty applications where extended high temperature exposure is required. It represents an excellent balance of processing advantages and high thermal stability .Excellent strength retention is maintained up to temperatures of 650° F.

Super SAP® CPM/CPF is a versatile system designed specifically for the compression molding processes of composite parts. CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus, combined with excellent elongation properties, enable durable yet lightweight composite parts. CPM is a Super Sap® Formulation.

NORSODYNE® M 01070 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding,injection molding,rtm method.

Lerpol RS 48 Alogen free, filled resin suitable for HLU/SLU , RTM , Infusion and press molding.

Sicomin SR GreenPoxy 56 / SD 7561 / SD Surf Clear is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. SR GreenPoxy 56 resin is based on the latest innovations in green chemistry. Resin is produced with a high carbon content of plant origin.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

DISTITRON® 183 CS - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

Maverick Corporation MVK-10 is a high‐temperature thermosetting polyimide resin with service capability up to288°C. Its low melt viscosity (300‐600 cP at 260°C) makes MVK‐10 one of a small number ofpolyimides suitable for use in resin transfer molding (RTM) processes. MVK‐10 compositesproduced produced by RTM exhibit exhibit no voids or microcracking microcracking.Originally developed by Maverick to replace PMR‐15 and its highly toxic diamine 4,4’‐methylenedianiline (MDA), MVK‐10 contains no mutagenic or carcinogenic components. Although it is most suited for RTM processing, its chemistry also allows for the use of autoclaveprocessing or compression molding. MVK‐10 is available as a PMR‐type resin solution or as apre‐imidized imidized powder from Maverick Maverick Corporation. Corporation.

NORSODYNE® M 01075 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding,pultrusion method.

Norsodyne® VUP-6737S - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

Norsodyne® M-0070C - for low profile systems, class a. It is generally used in automotive applicatons.

DISTITRON® 279 - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

NORSODYNE® M 28070 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

Norsodyne® VUP-6800 - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

DISTITRON® 3519 BS - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

DISTITRON® 3584 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

DISTITRON® 186 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Norsodyne® 2321 - promoted and waxed, medium viscosity grade. Main applications areas are building and construction, industrial sector etc.

POLYNT 9153 KA - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through press and vacuum molding method.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

Sicomin SR 8500 / SD 860x is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. It is Germanischer Llyod's certified, this multi-purpose epoxy system is recommended for the construction of large components.