Products in Composite Materials: Pipes

NORSODYNE® H 16239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

Rhino Linings USA, Inc. 1314 Resin is a Marine Laminating, Low Viscosity Epoxy Resin/ Offsets:West 105. Used for marine applications such as laminates, adhesives, sealers and fairing compounds. Also used where a low viscosity, quick curing epoxy system is desired. Very low mixed viscosities quickly wet thick reinforcements. Exhibits very low exudation, allowing secondary bonding with minimal preparation.

Taishan Fiberglass T980, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Aekyung Chemical CW-220 is an iso type UPR.

C-TAPE™ U600P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 651 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. *Disponible également en fiber FOE

D3-110-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

4,533 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® H-485 - isophtalic resin for PVC adhesion. It is generally used in industrial sector applicatons.

Epovia Optimum® KRF-1051 - novolac epoxy vinyl ester resin, chemical and heat resistance, low color, low foaming, fast cure. Main applications areas are building and construction, chemical industry, industrial sector etc.

Polynt Group SMC LS 3200 R20 C20 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R20 C20 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R20 C20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group 22-010LV clear series gelcoat is formulated from high quality iso-npg polyester resin, and is suitable for use in the manufacture of sanitary applications and cultured marble. This gelcoat provide quality finishes which deliver good water resistance, gloss retention and resiliency. The 22-010lv series gelcoat are sag resistant and have a fast curing system.Formulated for spray and roll applicationfast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Permit to fabricator to meet requirements of the canadian standard association b45, 5-02 parts that have to be assembled should be sanded before, to obtain a good adhesion. The 22-010lv series gelcoat may be applied by brush, roller or spray.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® G-689SY is general purpose orthophthalic resin for hand lay up and spray up. It is generally used in industrial sector applicatons.

Norsodyne® 3210W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Stypol® ACPW4000 is crystalline polystyrene shrinkage control additive. For use in SMC and BMC appliations. Excellent pigmentation for a wide range of colors. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

SKAPS DB 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

3B Fiberglass W 3030 are specifically designed to provide significantly higher modulus, strength and enhanced fatigue performances versus traditional E-glass for wind tur-bine blades made out of unsaturated polyester, vinylester or Epoxy resin. HiPer-texTM W 3030 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics. The sizing W 3030 is purposely for-mulated for excellent adhesion with polyester, vinylester and Epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Guangzhou Lushan New Materials EP252 is maleic grafted polyethylene. It’s mainly used for reinforced PE spiral corrugated steel pipes and steel wire with large caliber. Adhesive resin Lushan EP252 solves the adherence problems between plastics and plastics, plastics and metal, glass and other materials.

Rhino Linings USA, Inc. 1401-21 Resin is a 1401-21 Resin is a Epoxy System for Infusion. Multifunctional epoxy and cycloaliphatic-amine blend hardener for high performance composite parts.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.