Products in Composite Materials: Pipes

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Norsodyne® 2112 - thixotropic, promoted and waxed, lloyd's approved.

SKAPS L 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

DISTITRON® 412 SV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce windmill blades,reinforced plastics,general purpose through injection molding,rtm method.

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Guangzhou Lushan New Materials EP252 is maleic grafted polyethylene. It’s mainly used for reinforced PE spiral corrugated steel pipes and steel wire with large caliber. Adhesive resin Lushan EP252 solves the adherence problems between plastics and plastics, plastics and metal, glass and other materials.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® H-485 - isophtalic resin for PVC adhesion. It is generally used in industrial sector applicatons.

1521 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

Norsodyne® G-689SY is general purpose orthophthalic resin for hand lay up and spray up. It is generally used in industrial sector applicatons.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

EPOVIA OPTIMUM® RF 5000 UV - Urethane Epoxy Resin based vinyl ester in styrene. It is used to produce relining,cipp,pipes and tanks.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® 3210W - modified with mma and UV absorber contained resin for solid surface, good scratch and weathering resistance. Main applications areas are building and construction, industrial sector etc.

Stypol® ACPW4000 is crystalline polystyrene shrinkage control additive. For use in SMC and BMC appliations. Excellent pigmentation for a wide range of colors. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.

Polynt Group SMC LS 3200 R20 C20 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3200 R20 C20 meets mechanical and thermal properties with reduction weight of the final parts. SMC LS 3200 R20 C20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Epovia Optimum® KRF-1051 - novolac epoxy vinyl ester resin, chemical and heat resistance, low color, low foaming, fast cure. Main applications areas are building and construction, chemical industry, industrial sector etc.

Polynt Group 22-010LV clear series gelcoat is formulated from high quality iso-npg polyester resin, and is suitable for use in the manufacture of sanitary applications and cultured marble. This gelcoat provide quality finishes which deliver good water resistance, gloss retention and resiliency. The 22-010lv series gelcoat are sag resistant and have a fast curing system.Formulated for spray and roll applicationfast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Permit to fabricator to meet requirements of the canadian standard association b45, 5-02 parts that have to be assembled should be sanded before, to obtain a good adhesion. The 22-010lv series gelcoat may be applied by brush, roller or spray.

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Norsodyne® G-650STHY - thixotropic, preaccelerated, good workability. It is generally used in industrial sector applicatons.

D2-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Polynt Group 755-3109 is flame-retardant RTM vinyl ester resin based on brominated bisphenol-a. Main applications areas are agrochemical, agrobusiness, building and construction, chemical industry, composites, industrial sector, paper industry etc.

DISTITRON® 183 B1 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

NORSODYNE® P 46074 - Homogeneous system comprising a very high reactivity resin and a shrink control agent,in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through pultrusion method.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

DISTITRON® 100 CV2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through hand lay up and spray up method.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.