Products in Composite Materials: Pipes

MultiTech B is designed for high wear and tear resistance and is well suited for lining and protective coverings in the mineral, metal, material handling, and mining industries.Features/BenefitsHigh abrasion resistance.Excellent wear and impact resistant properties.

DiTech Core Material is a 6.0 lb/ft3 (96 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

JetFil® 575P is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M600 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetWhite 7D is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M700c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® P150 COR is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 750C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M500c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 3CC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 7C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M700 is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® T-FDC is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® M600c is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 575C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 625H is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Cardolite® Lite 2002 is a light-colored, very low viscosity 100% solids curing agent.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.

Crystic® Polyester Resin 198 is a medium-viscosity orthophthalic polyester resin with good heat and chemical resistance properties. This product was developed for use in the chemical industry (tanks, pipes, fume stacks, etc.), where heat and chemical resistance are both required, but it can also be used in industrial, transportation, and building and construction applications. It can be used with glass fiber-backed polypropylene and suitably treated uPVC. This product has a high HDT of 112°C and a 12-minute gel time.

Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.

Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.

Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.

Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces. 

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Pipe Relining Resin PD10098T is a thixotropic, non-accelerated, high-reactive orthophthalic neopentylglycol unsaturated polyester resin. It is specially developed for the production of liners in the pipe relining industry. Fully cured laminates of this product offer high chemical resistance and mechanical properties, as well as excellent long-term property retention.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® CiPP Resin D5101 is an unaccelerated, thixotropic, isophthalic polyester resin ideally suited for use in the production of liners for pipe relining. Thanks to Cured-In-Place-Pipe (CiPP) technology, this resin can be used to create a new pipe lining within an existing pipe structure, making it efficient and easy to use. Once fully cured, the laminates have good chemical resistance and mechanical properties, as well as long-term property retention. This resin is therefore ideal for heavy duty, high frequency, and industrial applications. This resin should be allowed to reach workshop temperature before use, at which point its gel time will be between 3 and 6 minutes. It requires the addition of a catalyst for the curing process to begin. However, further additives such as pigments and fillers may affect its natural properties, and their effects should be evaluated before use.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.