Products in Composite Materials: Prepreg

HexPly® F655™ is a bismaleimide resin that cures via an addition reaction in a toughened two-phase thermoset matrix with no condensation by-products. HexPly® F655™ is a controlled flow polyimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing.

PolyWeb has superior capacity and performance with high open area up to 45 percent and reduced operating and maintenance costs from long life and ease of installation.

HexPly® M10E is an epoxy resin system preimpregnated into aramid, glass or graphite multiaxial fabrics and unidirectional fibers. HexPly® M10E prepregs are recommended for the production of low cost, large thicksectioned industrial structures.

AtenPly CPPS35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Resinoid Compound 1322 is a glass reinforced, two step molding compound. It may be preformed. Recommended for transfer, injection or compression molding

PREGNIT TP-PA12 has high strength, rigidity and toughness.

GMS Composites EP-282 is a formulated epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-282 is a resin film available on a lightweight scrim or without a scrim. The EP-282 resin is compatible with GMS Composites pre-pregs. The resin film has good flow and the tack of EP-282 can be varied.

AX-3270 is a Structural Epoxy Fiberglass Prepreg.

IM Carbon Fiber UD100 H60-MR60H is a E3 Matrix System with a precursor as PAN.

AX-5202HT is a High Temp Cosmetic Epoxy Carbon Prepreg.

Shanghai Sunwise Chemical MTC510FRB is a flame retardant epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened, flame retarded epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. This resin system color is black.

AX-5110 is a flame retardant laminates, honeycomb and foam panels.

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg (250°C) results in low Z-direction expansion for resistance to PTH failure during PWB processing, and minimizes risk of latent PTH defects in-service. Reduced temperature and time to cure offers improved throughput compared to traditional polyimide cycles.

LC196 is an advanced, snap curing phenolic prepreg system that is self-adhesive to aramid/phenolic and aluminum honeycomb core. LC196 offers very good and consistent adhesion property values (climbing drum peel strength) over a wide range of curellaminating conditions. LC196 is self- extinguishing, and meets flammability requirements for use in aircraft interiors.

Toray TC264-1 is a flame-retardant epoxy prepreg that has been developed for oven cure composite fabrication processes utilizing either expendable or reusable lay-up mandrels. This epoxy-based prepreg system is ideal for use in Applicationss where flame retardency is needed such as air management system ducting, decorative enclosures, and fire-retardent composite panel assemblies. 127°C (260°F) Cure, Fire Retardant Epoxy Prepreg

Deltapreg DT197 is a Automotive with heat managment Application.

TG43/5 is a B-staged epoxy prepreg based on a fine weave glass fabric suitable for the manufacture of tubes and laminates.

OTS65 Tooling Prepreg has been formulated to give a robust surface finish with out of autoclave processing. It can be supplied on carbon or glass formats.

Park’s E-770 is a 350°F (176°C) curing, flame resistant modified epoxy system for 200°F (93°C) service and meets the requirements of Mil R-9300-B, Type I. It has excellent green strength developing properties quickly and doesn’t need a post cure to maintain its 200°F (93°C) properties.

33N is a flame retardant (UL94 V-O) polyimide laminate and prepreg system where the excellent high performance properties of polyimide need to be combined with flame retardance. High Tg (250°C) results in low overall z-axis expansion, and minimizes risk of latent PTH defects in-service.

Ecotechnilin L-FLAXPREG-T-UD-110-5m² is a unidirectional (UD) fibers - FLAXPREG T-UD 110.

Renegade Materials Corporation RM-2005 is a 350°F Curing Toughened Epoxy Prepreg system. In response to widespread aerospace market demand for an alternative to industry-standard toughened epoxies, has developed the NEXT generation Toughened Epoxy Prepreg, optimized for both hand-lay-up and automated fiber placement (AFP) processing. RM-2005 is supported by an extensive mechanical property database on both carbon tape and fabric. Excellent mechanical performance and damage tolerance makes RM-2005 a superior choice for military or commercial structural applications. RM-2005 is readily available with no minimum order quantities and the fastest lead times in the industry.

Toray RS-3 is a modified cyanate ester prepreg resin developed to provide a good balance between toughness and high temperature/wet performance. RS-3 has been evaluated and qualified in the areas of satellite, airframe/missile, and dielectric structures. RS-3 is also available in several modified formulations including: RS-3C, a controlled-flow vacuum-bag/oven-cure version; and RS-3M, an extremely low-flow autoclave version. 177°C (350°F) Service Toughened Cyanate Ester Resin

EF 14 are Flame Retardant, Highly Toughness and high energy transfer and applied in ballistic, Hard Body Armor.

Renegade Materials Corporation RM-6001 fire walker is a Polyceramic resin, supplied as prepreg using glass insulation fabric, or Quartz fabric.

Toray BTCy-1A is a toughened version of the BTCy-1 cyanate ester prepreg resin system. Its proprietary toughening mechanism and controllable flow make it an ideal product for use not only as a high performance prepreg resin system, but also as an accompanying resin system for film adhesives. BTCy-1A’s straight-up, easy processing at 177°C (350°F) (under low pressures) reduces curing time and production costs, while the system’s negligible volatile emission upon cure allows low void laminates. 177°C (350°F) Cure Toughened Cyanate Ester

AtenPly GPE35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

HexPly® M21 is a high performance, very tough epoxy matrix for use in primary aerospace structures. It exhibits excellent damage tolerance, especially at high energy impacts. HexPly® M21 is a toughened epoxy resin system supplied with unidirectional or woven carbon or glass fibers. HexPly® M21 was developed as a controlled flow system to operate in environments up at 121°C (250°F).

Shanghai Sunwise Chemical OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of OPS75 surface ply and 1 layer of PSB75 bulk ply.

Lectromat Glass Cloth and Mats DG-610 is applied in shrinkable coil armor tape.

HexPly® M81 is a high performance tough epoxy matrix for use in industrial applications requiring good impact resistance and damage tolerance, such as the automotive industry. HexPly® M81 is based on the highly successful HexPly® 8552 toughened epoxy resin system, used widely around the world for the manufacture of aircraft structures. Non-aerospace customers now have the opportunity to benefit from the excellent performance of this resin system presented with reinforcements specially adapted for industrial markets.

7356 PTFE-Glass Fabric is a Economy Grade PTFE-Glass Fabric is designed for large volume applications that require cost-efficiency and high performance. Applications include leaders for processing paper, plastics, metallic foils and cloth, separator sheets for processing uncured rubber and manufacturing of abrasive wheels.

PREPREG system BD (epoxy resin) are based on modified epoxy resins with high impact strength and excellent dynamic properties. They can be processed into high-strength structural components using all common methods. The hardening range is between 85 ° C and 140 ° C ; the max. heat resistance is 125 ° C . The delivery program with fabric, laid and unidirectional reinforced PREPREGS allows the load-based design of your components.

AX-3611 is a MDA-free Condensation Polyimide Fiberglass Prepreg.

7109 PTFE-Glass Fabric is a Premium Grade PTFE-Glass Fabric offers optimum release and durability in harsh environments. Applications include reusable pan liners for cooking and baking, laminate separator sheets, tortilla and pizza crust belts, heat sealing and applications where fabric weave impression is undesirable.