Products in Wire & Cable: Good Mechanical Properties

SLL318 is a linear low density polyethylene, copolymer of butene-1, developed specifically for cast film extrusion applications. Films produced with this product exhibit excellent mechanical properties and enhanced sealability. With a minimum biobased carbon content of 87%, as determined by ASTM D6866, this grade aligns with sustainable practices. Additionally, it contains oxidant additives to further enhance its performance.

For more information regarding REACH, please visit Braskem's site

SLH218 is a LLDPE Hexene copolymer, expertly crafted by Braskem. This grade delivers an optimal balance of optical properties, mechanical properties (especially stretchability), sealability, and processability. It contains very low gel content, ensuring smooth processing. With a minimum biobased carbon content of 84%, determined according to ASTM D6866, SLH218 upholds sustainable practices while offering versatile performance in various applications.

For more information regarding REACH, please visit Braskem's site

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

Elastomers EPR is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

POWERSIL® 740 Dark Gray A/B is a paste-like, two-component compound with short curing times. It is designed to form vulcanizates with exceptional properties, including high tracking and erosion resistance. The material exhibits excellent mechanical properties, particularly high tear strength, and demonstrates outstanding dielectric behavior.

POWERSIL® 190 MH is a one-component silicone rubber compound that is peroxide-curing and ready to use. It is specifically formulated for high voltage applications. When used to extrude or mold insulators, POWERSIL® 190 MH provides excellent resistance to arcing and tracking. This enhanced resistance helps improve the reliability of electrical systems and reduces power interruptions.

GENIOPLAST® Fluid FR is a high-viscosity silicone formulation specifically designed as a polymer additive for polyolefins and other thermoplastic resins. It is composed of a linear silicone fluid with a dissolved silicone resin, resulting in a clear and colorless formulation. The primary application of GENIOPLAST® Fluid FR is in plastic additives.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.

POWERSIL® 735 Light Gray A/B is a two-component compound with low viscosity, offering excellent processing properties. The resulting vulcanizates exhibit remarkable resistance to tracking and erosion, along with favorable mechanical properties such as high tear strength. Additionally, they demonstrate excellent dielectric behavior, making it a reliable choice for various applications.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

POWERSIL® 466 A/B is a ready-to-use, two-component system of liquid silicone rubber. It exhibits medium conductivity and offers stable electrical properties along with good mechanical properties. The material is characterized by high elongation at break and low tension set, ensuring flexibility and durability in applications.

POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

POWERSIL® 466 LV A/B is a ready-to-use, two-component system of liquid silicone rubber. It offers medium conductivity and exhibits excellent mechanical properties. The material has high elongation at break and low tension set, providing flexibility and resilience. Additionally, it maintains stable electrical properties, making it suitable for various applications.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

POWERSIL® 464 A/B is a ready-to-use, two-component system of electrically conductive liquid silicone rubber. It exhibits medium conductivity and possesses good electrical and mechanical properties. It is specifically designed with excellent bonding features on RTV-2 rubber, ensuring stable electrical properties and reliable mechanical performance.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

POWERSIL® 740 Light Gray A/B is a paste-like, two-component compound with short curing times. When cured, it forms vulcanizates that exhibit remarkable properties such as high tracking and erosion resistance. The material also demonstrates good mechanical properties, including high tear strength, and exhibits excellent dielectric behavior.

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

POWERSIL® 440 MH is a ready-to-use electrically conductive silicone rubber grade suitable for all types of molding applications. It is specifically designed for field grading in cable accessories and other electrically conductive parts. This material provides excellent conductivity and is ideal for applications requiring electrical conductivity.

ELASTOSIL® R 757/60 is a high-consistency silicone rubber (HCR) known for its exceptional resistance to hot air, especially when a heat stabilizer is added. The material exhibits excellent tear resistance, a low compression set, and high elasticity. It is suitable for use in appliance cables that comply with UL 758 and have a temperature rating of 250 oC.

SABIC's Specialties Business ULTEM™ Resin 1010R is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg of 217°C), improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The material is available in opaque colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 1000 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS-compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance needs to be checked case by case for colored variants. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 2300 resin is a standard flow 30% glass fiber reinforced polyetherimide resin.ULTEM 2300 resin is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance.ULTEM 2300 resin may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C.ULTEM 2300 resin is opaque and can be custom colored.FeaturesAmorphousChemical ResistantDimensional StabilityFlame RetardantGeneral PurposeGood AdhesionGood FlowGood Mechanical PropertiesHeat ResistanceHigh Hydrolytic StabilityHigh StiffnessHigh StrengthLow CreepLow Smoke EmissionLow ToxicityVery Good Heat ResistanceWide Temperature Operating RangeApplicationsConsumer Appliances & ElectronicsAutomotive LightingAutomotive Electrical & Electronic SystemsAutomotive Interior, Exterior & BodyPowertrain & UTHGlazing & Window ElementsInterior FixturesArtificial TurfAutomotive ElectronicsDisplaysIndustrial AutomationFurnitureHousewaresLawn & GardenMedical Devices & AssembliesNon-Food Consumer PackagingConnectorsPrinted Circuit Boards (PCBs)Semiconductor ManufacturingSwitches & RelaysPower & UtilitiesRenewable EnergyConsumer Goods for Sports & RecreationTextile ManufacturingAerospace & AviationOff Road & Recreational Vehicle (RV)Rail & Mass TransitOptical Fiber & Telecom This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

SABIC's Specialties Business Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method) This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.