Products in Other Parts & Components

Lattice Composites LCMC-C1 is a low cost carbon fiber BMC with high strength, lightweight applications.

Guarniflon G412/GRAPHITE is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Paracril 45110 is a copolymer of butadiene and acrylonitrile, cold polymerized and non-staining stabilized.

BARLOG plastics GmbH Kebablend® / WR 04/1310/2115 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

Sekisui Plastics CELPET F is more environmentally-friendly, fuel-saving alternative made primarily from used PET bottles (PET bottle flakes).

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Neoplast™ 180 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

Paraclean 31L35 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

AGITAN 150 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 150 is resistant to alkaline environment. It can be used between pH 6 and 11.

PA12 functional compound for the production of plastic-bonded magnets

NuSil™ GEL-3500 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: GelComment: Fuel Resistant Gel, Durometer -Type '00' 50.

Normal viscosity polyamide 6, modified with 25% PTFE

Starex NH-1101 by LOTTE Advanced Materials is comprised of PC/ABS Engineering Resin, Polycarbonate and Acrylonitrile Butadiene Styrene. It is commonly used

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

Petroz™ 375 durometer general purpose FFKM with exceptional compression set properties and excellent chemical resistance.

Yildiz Kolor AF-10 is an antifogging mastermatch group and Antifogging Agent additive.

DBDPE is a kind of broad-spectrum,high efficiency fire retardant with the features of low additive quantity.It is widely used in rubber,textile,electronic,plastic industry etc. Especially used in polyethylene,polypropylene,ABS resin,PBT resin and rubber fiber etc.

Formalen PP-Homopolymer 30% glass fiber reinforced Natural is used for mechanical, aeronautical, electric and construction applications. It has good stiffness, good resistance to chemicals, and good electrical properties.

RIALENE P 101 SGF40plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

Formacrom PC is used for electric, construction and metal replacement applications. It has good transparency, impact resistance and dimensional stability.

VYPET™ VNT-2530 BK is an injection moldable, black, 30% glass-reinforced polybutylene terephthalate (PBT) /polyethylene terephthalate (PET) compound non-halogenated flame retardant grade designed for electrical applications. Minimum 25% post-consumer recycled content (Ocean-bound PET).

NIRETAN B F25 is regionally available in Europe.

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

NuSil™ EPM-2410 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and SealantsComments: Ideal for Static Mix and Dispense Applications. Available in Black and White.

Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.

Comco PLAVIS G40 is a self-lubricating grade with low thermal expansion. Modification: 40% graphite.

Procotex CF-120mm is a mixture of all origins carbon and graphite ex-PAN fibers, obtained from spools of pure carbon fibers, cut for the widest range of short fibers applications. Its original sizing, which can vary, is generally compatible with the widest range of thermoplastic and thermosetting matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

PAR Group Nylon 6 Cast Black Sheet is a popular engineering plastic due to its ease of machinability, high strength, stiffness and hardness. It has good wear resistance and is resistant to the majority of chemicals, fuels and oils. Nylon 6 Sheet - Cast Black also has good heat aging properties and is electrically insulating. The table below shows our standard sheet availability, which are manufactured in-house utilizing our own Nylon Casting facilities. Many of these sizes are available to buy online by clicking the link above. We can also manufacture rods, tubes or bespoke shapes upon request. Nylon 6 sheet - cast black is available to buy online at PAR Direct by clicking the link above.

ProPolymers PPS 4010 GZ-BK is a polyphenylene Sulfide resin designed for wear resistance and reduced friction. It offers a superior combination of mechanical, electrical, and thermal properties. It provides outstanding processability and chemical resistance.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process. Plastazote® 5SLD30SDBK-0232 is a static dissipative low density polyethylene foam.

menzolit® SMC 0160 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Foreverest Resources Hydrogenated Rosin H106 is one of the dominant varieties of modified rosin with light color, high oxidation resistance and high thermal stability. It is soluble in ketones, esters, hydrocarbons, alcohols and chlorinated solvents and insoluble in water. Conjugated unsaturation of abietic resin acids can be removed through catalytic hydrogenation to overcome the shortcomings of oxidation and color degradation in rosin, is compatible in useful proportions with alkyds, natural and synthetic rubbers, natural resins, ethylcellulose; waxes; plastic polymers, elastomeric polymers, metallic pigments, and many other raw materials.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.Plastazote® 5SLD33RD-0094 is a low density polyethylene foam.

Liquid-O-Ring® 3500 Red Gear Oil provides lubrication for bearings and gears, particularly those operating under severe service conditions. 3500 Red Gear Oil, is a 85/140 wt. oil, forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is waterproof, nonfoaming, and resistant to oxidation and corrosion. 3500 Red Gear Oil also reduces wear as much as 60%. It has a drain interval of 4 to 5 times longer than commercial gear oils.