Products in Other Parts & Components

ORTHOPHTHALATES OP1017 is a Resin for SMC/DMC.

Semi-crystalline thermoplastic with high Hardness, rigidity and mechanical strength as well good creep resistance. By adding a it has a special, homogeneously distributed solid lubricant, compared to pure PET, improved sliding properties and higher abrasion resistance.

SIVIC® 2870 is low acryonitrile based multipurpose grade polymer with good extrudability and cold flex properties for industrial hose, cable and conveyor belt.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

FORMPOLY® N46CF15L offers a range of Nylon46 grades from unfilled, glass fiber reinforced, mineral reinforced to flame retardant including FORMPOLY N46CF15L which is Carbon Fiber Reinforced Nylon 46 with heat stabilizatiion.

Eeonomer 200F are a new class of thermally stable, pH neutral and electrically conductive composites made by in situ deposition of polyaniline or polypyrrole on carbon black. Eeonomers are more stable (up to 300 C) than doped intrinsically conductive polymers and more easily processed with thermoplastics than carbon black.

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Nizhnekamskneftekhim High-Impact Polystyrene 740M is an high impact polystyrene is intended for injection molding and extrusion applications. The polymer is used for fast cycle injection molding of parts for household and electronic appliances.

AFT Fluorotec AF001 Virgin PTFE is one of the most chemically inert materials known. It is used in many different applications and industries.

SynFoam HTC is a castable syntactic foam that has exceptional dielectric and low loss properties. SynFoam HTC can be used at temperatures up to 180oC and is resistant to water, chemcicals, and hydrocarbon fluids. The castable nature of the product eliminates the need for machining and is suitable for use with standard RTM and mix-meter equipment. The surface finish of parts molded from SynFoam HTC varies from high gloss to matte depending on the finish of the mold. SynFoam HTC has been used in the fabrication of radomes, antennas, reflectors, and radar absorbing coomposites. SynFoam HTC is available as 1, 2, and 5 gallon kits. Each kit contains an A and B side that must be mixed together prior to casting. SynFoam HTC will require a temperature of 150oF to cure with higher postcure temperatures recommended to reach the maximum service use temperature. Please consult the appropriate instructions prior to using HTC. If you have a specific mold for use with SynFoam HTC we also provide final casting and fabrication services.

3B Fiberglass 108F-14P is specifically designed to reinforce polycarbonate PC compounds with low glass fiber loading (5-15%).Its unique sizing technology results in exceptional performances in terms of dimensional stability, dispersion, mechanical properties and color. This product is not sensitive to flame retardant additives. 108F-14P is also very effective for the reinforcement of PVC resins. An innovative manufacturing technology provides 108F-14P with a very good strand integrity and bulk density. As a result, this product exhibits very good feeding properties with low fuzz generation compared to other glass fiber materials.

AFT Fluorotec AF115 Reinforced PTFE material specifically developed for slide bearing and skidway applications. This material comprises a unique blend of filler compounds to give optimum compressive strength whilst retaining very low frictional coefficients. The load bearing characteristics are greatly improved over conventional PTFE materials and the unique blend of fillers means maximum compressive strength whilst still having an extremely low coefficient of friction, regardless of conditions, surpassing other filled PTFE materials. AF115 is also unaffected by UV.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PC DP113/X5 is a thermally conductive, electrically insulating polycarbonate compound, combining good thermal conductivity with high HDT and good processability.

Carbon Fabrics 38178 is made of carbon fiber by 4/4 Twill weaving style.

Chemraz XCD is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XCD include engineering/industrial parts and sealing applications.Characteristics include: Heat Resistant High Purity

Nylene Glass and ceramic fiber reinforced nylon 6 injection molding material Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products Suitable for such uses as valve bodies, pump housings, hydraulic fittings and couplings, and other applications which require this unique set of characteristics

GEHR PBT® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

POULOY® 2001B is applied in communication products, audio & video products, E/ E parts.

Polymer Tailoring PTFA 12 is a tough and rigid halogen-free compound designed for injection molding engineering components.

Ponyl® 4001G40 is applied in structural parts, shells of power tools,etc.

PA6 functional compound for the production of plastic-bonded magnets

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

ESTOPLAST EP 1500WW06 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Emulprene 10140 is a product manufactured by mixing a cold styrene –butadiene copolymer containing 5.5% bound styrene (80%) with high styrene resin latex (20%), coagulated by salt– acid system and stabilized with a non-staining antioxidant.

Kaofu Chemical HPS-800 is used for making of containers, toys, appliance parts, electronic packing material.

Dongguan SUGO Plastics Technology B1399D has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process. Plastazote® 5SPK80SGY-0889 is a high rigidity polyethylene foam.

AGITAN 296 has a wide formulation lattitude due to its ease of emulsification in water. It can be effective in clear coats and low viscosity systems.

A soft, colorable copper stabilized halogen free flame retardant (HFFR) thermoplastic vulcanizate, TPV (EPDM/PP) with superior UV – Ozone resistance.

Enflame750 is a non-halogenated flame retardant which develops its effectiveness through phosphorus/nitrogen synergism. When incorporated into thermoplastics, it shows high processing stability. Enflame 750 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect, reduces further oxygen access and prevents dripping of the thermoplastic.

IBA Kimya San. ve Tic. A.S. FF35 is a thermosetting powder coatings based on epoxy and polyester resins designed for interior applications. It has good yellowing resistance combined with excellent overall performance.

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

Voltoid® HP-450 is a high density composite designed to provide superior flame barrier properties and dimensional stability at high temperatures. Composed of aramid fiber, filler, and polymeric binders, it features low water absorption and exhibits outstanding electrical and mechanical properties.