Products in Other Parts & Components

Polysulphone (PSU) based compound. Glass fibres. Low smoke density and low toxicity index. Very high dimensional stability.

Thermax® N990UP Ultra Pure has extremely low levels of elemental impurities.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

POM copolymer unreinforced, medium viscosity

Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Nylene Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using Nylene 5130 PT15 provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 PT15 is suitable for applications such as bushings and bearings, wear plates, and other parts where high strength with maximum wear resistance is required.

Procotex CF.LS-MLD150 is a mixture of all origin carbon and graphite ex-PAN fibers,obtained from pure carbon fibers, selected and milled for compounding. Its very low sizing level, which can vary, is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK is an electrically conductive composite material comprising of silicone elastomer and silver plated copper particles. It is designed to be easily applied to panel joints &seams and/or the small clearances that result from non-continuous mechanical fixing in sheet metal enclosures. On application it cures at room temperature to form a highly conductive elastomeric section / joint that has good adhesion to most commonly used metals &substrates. When fully cured it will prevent water ingress and improve the EMI shielding performance of panel joints &overlaps.

Dhara Petrochemicals Dpnor UF-M-010 is mPPE Compounds, Unfilled for injection molding. Dpnor UF-M-010 is widely used for submersible pump parts like bowls, impellers & diffusers, automotive parts, appliances parts, industrial parts. This product is available in Natural, Black & other colors.

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications

Flame resistant grade

Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface esthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and mar resistance, and resistance to some aggressive chemical agents. Buckeye Polymers can also customize these materials through the addition of UV packages, custom color matching, and processing additives.Features: Increased Stiffness and Heat Deflection UV Resistance, Good Industrial, Appliance, Construction Markets Scratch and Mar Resistance, Good

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

ISOVAL® 11 HKB (EP GC 306 & 308) is a High tracking resistance (CTI 600) glass filament fabric, construction material in electric appliances and switchgear, especially for applications where surface contamination occurs, Thermal Class H (180 °C). It an epoxy-glass-hard fabric made of a glass fabric, impregnated with a special, tracking current-resistant epoxy resin. This gives the material excellent heat resistance and chemical resistance.

AI-42 grade of syntactic has been formulated specifically to meet the require-ments outlined in NAVSEA Drawing number 5856846 REV B defining the re-quirements for rigid syntactic foam for acoustic isolation and pressure release applications.

Kotex K-30FR is a Non-brominated & non-chlorined flame retardant. Medium viscosity, Transparent

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

POM copolymer unreinforced, very low viscosity

NuSil™ R-1082 is a RTV silicone coating.

Paraclean 36L45 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Nylon 6 A1030BRL is a standard Nylon 6 grade with medium viscosity. It is used for injection molding applications.

menzolit® SMC 2600 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Grupa Azoty S.A Tarflen® SG1 is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compression molding.Important attributes of Tarflen® SG1 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

Kotex KGN-30MRA Polycarbonate is a food contact, high flow, mold release which is transparent.

UNISOFT TPE™ ST-55A-BK-3-01 is a black colored thermoplastic elastomer (TPE) grade based on styrene-ethylene/ butylene-styrene block copolymer. Exhibits improved outdoor resistance, shows soft touch and adhesion to polypropylene. Is suitable for processing by injection- and extrusion molding. Applications include electronic and automotive industry.

Nylacast Peek is a high performance engineering thermoplastic. It is very strong and rigid. The characteristics of PEEK show that it has the highest tensile strength in the plastics family. It can be used on a continuous basis in temperatures of 480°F (250°C) without any loss of its properties.

Techno Compound PBT2 FR Natural (9984) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Dongguan SUGO Plastics Technology B3400D has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

AI-24 of syntactic has been formulated to take advantage of the inherent insulative properties of the material due the cellular structure resulting in interesting acoustic properties. The high strength and stiffness means these properties do not change at depth allowing use in acoustic windows and transducer isolators and de-couplers.

Ultra Purge™ 5150 by Chem-Trend is an odorless, general purpose, ready-to-use purging compound with ULTRA-X™ technology. Compatible with crystalline resin. Insoluble in water while soluble in organic solvents. It can be processed using injection molding (hot runners), extrusion, blow molding without accumulator, blow molding with accumulator and sheet extrusion. Designed for color changes, material changes, carbon build-up and shut- downs. Ultra Purge™ 5150 complies with GRAS (Generally Recognized As Safe) by FDA, TSCA (Toxic Substances Control Act), RoHS (Restriction of Hazardous Substances), REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), DSL (Canada Domestic Substance List), IECSC (the Inventory of Existing Chemical Substances), KECI (Korea Existing Chemicals Inventory) and WGK (German water hazard class).

NuSil™ R-2200-6 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Mold MakingComment: Casting, Creating Molds.

Procotex CF-MLD250 is a mixture of all origin carbon and graphite ex-PAN fibers, obtained from pure carbon fibers, selected and milled for compounding. Its sizing, wich can vary is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints..; its compatibility needs to be checked on each new batch and for each new application.

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves