Products in Other Devices & Assemblies

Sylvin™ 9077-75 Yellow 4109 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Wellamid® 6000 GVS 10/20 HWCP by CP-Polymer Technik is comprised of Polyamide 6 and Thermoplastic (unspecified). It is commonly used

Cosmoplene® AY564 by The Polyolefin Company (TPC) is comprised of Polypropylene (unspecified). It is commonly used Cosmoplene® AY564 is certified as UL Flame Rated.

Sylvin™ 9067-90LMW White 1254 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Glass Sphere Reinforced Nylon Resin (PA6)

PP Copolymer Industrial Black 20% Talc filled

Cromex PE-AO 50015 is used in films and bottles for content protection and parts subjected to high temperatures.

Haiplen™ H10 T8 HT by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H10 T8 HT is certified as UL Flame Rated. It is available in Pellets form.

KEBATRON C 2065X3 is a crosslinked PPS with reduced chlorine content that also is reinforced with 40% fiber glass filling or mineral fiber.

A210 is a Ground ATH is used in SMC, BMC.

LiNNOTAM with solid lubricants, additives and stabilizers finely distributed in the material. LiNNOTAMGLIDE Pro T has self-lubricating properties due to the added components and shows excellent wear resistance at very high low coefficient of friction.

Sylvin™ 90690A-80 Black is a vinyl compound formulated for electrical molding applications.

Sylvin™ 7833-75 Green 3177 is a vinyl compound formulated for electrical molding applications.

Da/Pro Rubber Conductive Elastomers are rubber compounds that have been specially compounded and modified to make the rubber electrically conductive. The level of conductivity of rubber ranges from Insulative to Antistatic to EMI/RFI Shielding to Highly Conductive. The base polymer is an insulating material. Ingredients added to make a rubber compound effect the level of conductivity.

Sylvin™ 7833-80 Blue 8450 is a vinyl compound formulated for electrical molding applications. This compound is listed as a recognized component by unrderwriters laboratories.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025IR(F) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025IR(F) resin grade is used in film and sheets. Medium viscosity. Transparent colors only.

Larderel® Zinborel Fine has its applications in the plastic industry as flame retarder and smoke suppresser; in the wood industry as preserver and flame retarder; in the wood-plastic composites industry.

INFINO VB-5300GS by LOTTE Advanced Materials is comprised of Polybutylene Terephthalate. It is commonly used

Sylvin™ 9604-95 Yellow 4186 is a vinyl compound formulated for electrical molding applications. This compound has a underwriters laboratories listing as a recognized component.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3026B(Q) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3026B(Q) resin grade is used for extrusion blow molding components. High viscosity. Transparent colors only.

Melinex® 238 FI 13020 is a flexible, white polyester film with a matt surface. Melinex® 238 FI 13020 has a relevant according to UL classification Temperature index of 140 ° C a mechanical RTI of 130 ° C and has a excellent aging behavior compared to standard polyester films, which have a higher oligomer content. Furthermore, Melinex® 238 FI 13020 high dielectric strength, little change in dielectric values, special mechanical properties and very good hydrolytic stability determined. The half-life of the mechanical properties is comparative doubled.

Fainplast Compounds Fainplast™ PVC FK 0656/1 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is low temperature resistant.

Hesgon Company 100% Polyester Heat Shrink Tape 54-36P is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

Shenzhen Xinghua Pigment Masterbatch Solvent Green 28 is green colored anthraquinone dye. This grade offers high heat resistance, very good migration fastness and excellent light fastness. Solvent Green 28 is designed for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PC and PBT. It can be used in PA6 and PA66.

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Everaox® 168 has excellent hydrolytic stability, good thermal stability, low volatility.

Toray Amilan® HF3064G15 is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, flame retardant, good toughness and halogen free.

Neviester B1 V30 NATURALE is a natural color. Its used in Electric & Electronic Consumer Goods.

Flame resistant grade, Weather resistant grade

GEHR PA® 6 C is a high-molecular and stress-reduced PA 6, which shows a very tough behavior and which was produced by casting. Our round rods and sheets in natural color comply with the food contact regulations according to 10/2011/EC.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3027PJ(M) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Granule Type - Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3027PJ(M) resin grade is designed for Compounding. High viscosity. Transparent colors only.

PP Homopolymer Natural 40% Mixed Mineral filled

Sylvin Technologies Sylvin™ 9812-65 Yellow 405 is a vinyl compound formulated for general purpose electrical molding applications that require better flammability resistance. This compound has a UL listing as a recognized component and a dielectric strength of 514 volts.

Fainplast Compounds PVC PH 80/8-UV is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .