Products in Other Devices & Assemblies

MAST Technologies MR21-0001-20 has the characteristics of The tough material can withstand outdoor exposure. Extremely thin for tight quarters. A flexible elastomeric material will not crack. Support a wide frequency range RoHS/REACH Compliant, Halogen-Free.

Sylvin™ 8948-65 Black is a vinyl compound formulated for extrusion or molding applications that require good low temperature properties.

Sylvin™ 9067-90 White 1198 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Paracril N41 is a copolymer of butadiene and acrylonitrile, cold polymerized with a semi staining stabilizer.

Haiplen™ H50 T5 by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H50 T5 is certified as UL Flame Rated. It is available in Pellets form.

Sylvin Technologies Sylvin™ 916VO-95 Blue 8252 is a thermoplastic compound formulated for electrical injection molding applications. This compound has a underwriters laboratories listing as a recognized component for all colors.

Self-lubricating product based on Polyoximethylene (POM). PTFE.

BARLOG plastics GmbH Kebablend® / WR XB 111001/1 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Starex TX-0510 by LOTTE Advanced Materials is comprised of Methyl Methacrylate / ABS. It is commonly used

Sylvin™ 7833-75 Gray 9280 is a vinyl compound formulated for electrical molding applications.

Sylvin Technologies Sylvin™ 916VO Brown 7415 is a thermoplastic compound formulated for electrical injection molding applications. This compound has a underwriters laboratories listing as a recognized component for all colors.

Sylvin™ 9067-90 Gray 9193 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratoraies listing as a recognized component.

INFINO NH-3200 by LOTTE Advanced Materials is comprised of Polycarbonate. It is commonly used

Sylvin Technologies Sylvin™ 7840-70 Red 683 is a vinyl compound formulated for electrical molding applications. This compound has a underwriters laboroatory listing as a recognized component with a ul 94 v0 flame rating at a thickness of 1.5 mm.

Toray Toyolac® 824V-X01 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and flame retardant.

Sylvin™ 9067-85 Gray 9545 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Resinoid 1365 is a glass reinforced, two-step phenolic molding compound offering excellent mechanical strength as well as good electrical and thermal characteristics. This material is offered as a moderate size pellet suitable for compression and transfer molding. It can be used in injection molding systems with deep flight screws.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020U(H) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020U(H) resin grade is used for Injection molding products. UV stabilized. Low viscosity. Transparent colors only.

Weather Resistant grade

TPE Solutions TPV 160A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Sylvin™ 7868-90 Black is a vinyl compound formulated with FDA sanctioned ingredients for electrical molding applications.

Electroblend® PBT-1801 is a glass fiber reinforced conductive polybutylene te rephthalate compound characterized by high mechanical with lower shrinkage properties.

Sylvin Technologies Sylvin™ 9812-80 Black is a vinyl compound formulated for general purpose electrical molding applications that require better flammability resistance. This compound is RoHS compliant and has a U. L. listing as a recognized component.

LONGHUA PC 870 having velvet – fine matte Film texture is a black - opaque, textured film, recommended for Panel printing purposes, UL94 V-0

Abbott Rubber Company 1/8 TH X 36 60 DURO EPDM COMM GRADE

Fainplast Compounds PVC KL 82/3 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Sylvin™ 7868-80C Black is a vinyl compound formulated with FDA sanctioned ingredients for electrical molding applications.

Sylvin™ 9067-90 Orange 561 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Thermalbright® Polyimide is a High performance white polyimide Thermalbright® Polyimide is a high performance white polyimide with wide ranging uses in display applications, electrical insulators, composites, industrial tapes, space structures, and many others. Thermalbright® Polyimide is useful in thermal control applications requiring low absorptivity, high emissivity, UV stability, and high temperature colorfastness. Thermalbright® Polyimide exhibits high optical density and hiding, making it an excellent high temperature white paint replacement material. Thermalbright® Polyimide is available in two grades: Thermalbright® C for Electrostatic Dissipative (ESD) applications, and Thermalbright® N for applications that require electrical insulation. Thermalbright® Polyimide is available as a liquid casting resin or film product.

Sylvin™ 9077-85 Gray 9470 is a vinyl compound formulated for injection molding applications. This compound has a underwriters laboratories listing as a recognized component.

Idemitsu Chemicals Xarec® C132 is a Syndiotactic Polystyrene (SPS) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PP Copolymer Black 15% Mixed Mineral filled