Products in Wall Panels

Composite Materials Surface Finish A Base White have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, Composite Materials Surface Finish A coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Composite Materials Surface Finish A gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

MultiTech MultiFunctional T is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. MultiTech MultiFunctional T recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

Composite Materials Core Material B is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

DiTech Core Material is a 6.0 lb/ft3 (96 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

MultiTech DiFunctional C is used as In-can and Dry-film Preservative in paint and coating applications. It also possess anti-bacterial properties and is effectively used for treatment of household sponges. It has its use in controlling growth of odor causing microorganisms in textiles, for dry film preservation of adhesives, caulks, sealants, non-marine paints, foams and coatings, powder coatings, residential paints. It has also application for control of mildew and bacteria in styrene butadiene, natural rubber, resins. It has application to inhibit growth of bacteria and fungi in dry walls, ceilings, wall p

MultiTech MultiFunctional U is our recycling additive for polyolefins MultiTech MultiFunctional U recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. MultiTech MultiFunctional U for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

DiTech Binder & Resin is a Patented fiber engineering technologies developed by Zelfo Technology can transform 100% renewable or recycled cellulose fibers into self-binding Zelfo® materials.

ALPHA FOAMER® is an anionic foaming agent that plays a vital role in gypsum wallboard, firefighting foam applications, and the creation of foam-forming products. It is categorized under the alkyl ether sulfates chemical group and serves as a gypsum foaming agent.

CEDEPAL® FA-406 is a unique surfactant known for its remarkable foaming capabilities across various conditions, including soft and hard water, saturated brine, and gypsum solutions. It serves as a versatile foaming agent applicable for multiple purposes. Widely used in wallboard applications for its foaming power, it also proves its worth in gas and oil field drilling operations, as well as concrete admixtures.

ALPHA FOAMER® G stands out as an anionic surfactant tailored for maximum foaming in diverse conditions, including challenging scenarios like hard water and gypsum solutions for gypsum wallboard production. Primarily utilized as a gypsum foaming agent, it finds application in the construction market, specifically within gypsum-based material production.

SILRES® BS 1705 is a high-quality water-thinnable emulsion that is solvent-free and based on a mixture of silane and siloxane compounds. It is specifically designed to act as a specialty water repellent for impregnating cement-based products, including fiber cement. By impregnating cement-based materials, such as fiber cement, with SILRES® BS 1705, their water repellency is significantly enhanced, providing long-lasting protection against water absorption and related problems. This makes SILRES® BS 1705 an excellent choice for improving the durability and performance of cement-based products in various applications.

SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Noblen® HGZ 1200 Natural is a polypropylene, high crystalline homopolymer with ultra high melt flow, making it great for thin wall molding applications. Applications: Packaging Trim requires excellent balance of flow and stiffness.   Features: Which has high surface hardness Good scratch resistance.

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures.   Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts   Features: Excellent impact performance at low temperatures well-balanced mechanical property   Benefits: Mold-in-Color Recyclable

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

SILRES® WH 100 A is a water-reducible, solvent-free emulsion of a functional silicone resin. It is a water-based product that offers several properties and benefits. When applied, it creates an eye-catching water beading effect, enhancing the appearance of the treated surface. Additionally, it significantly reduces capillary water absorption, providing protection against moisture. SILRES WH 100 A can be used over various substrates, including metals, concrete, and others, to impart its water-repellent properties.

SILRES® BS 1703 SQ (000010587) is specifically designed for the in-plant water-repellent treatment of fiber-reinforced cement products, including fiber-cement boards. Its main purpose is to greatly reduce the capillary water absorption of these construction materials once they have set and reached equilibrium moisture. The use of SILRES® BS 1703 SQ provides enhanced protection against water damage, contributing to the longevity and quality of fiber-reinforced cement products.

SILRES® BS 1703 SQ (000096394) is also primarily intended for in-plant water-repellent treatment of fiber-reinforced cement products, such as fiber-cement boards. It exhibits a higher flash point and increased storage stability compared to SILRES® BS 1703. While it may have a slightly opalescent appearance with a slight yellowish discoloration, it does not affect the excellent performance of the product.

VINNAPAS® eco 4023 N is a versatile dispersible polymer powder designed for dry-mix mortars. It is particularly suitable for applications such as tile adhesives, ETICS (External Thermal Insulation Composite Systems), and self-leveling compounds. This product is based on a flexible copolymer of vinyl acetate and ethylene, belonging to the VINNAPAS® N product class. As a member of this class, it has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for a wide range of formulation possibilities.

SILRES® BS 2410 A is a highly active, functional epoxy silicone macro-emulsion. It is designed for use in the hydrophobation of paper backing for gypsum board. It is particularly suitable for permeating through paper backer fibers without affecting the adhesion properties of gypsum. It does not cause shade change and has no concerns about the yellowing effect.

Dragonpovol Polyvinyl Alcohol (26-98 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-24E, and PVA-124, some benchmark bands in the market. It has been widely used as a sizing agent in paper manufacturing, a warp sizing agent in textiles, and as a raw material for PVA panels or PVA thin films. This product can also be used in adhesives, paints, and coatings.

Dragonpovol Polyvinyl Alcohol (26-88 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BP-26, the benchmark band in the market. It has been widely used as a paper sizing agent, warp sizing agent in textiles, and as a raw material for PVA panels and thin films. It can also be used in the adhesive, paint, and coatings industries.

Dragonpovol Polyvinyl Alcohol (26-88G Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BP-28, the benchmark band in the market. It has been widely used as a paper sizing agent, warp sizing agent in textiles, and as a raw material for PVA panels and thin films. This product can also be used in the adhesive, paint, and coatings industries.

Dragonpovol Polyvinyl Alcohol (26-98G Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-24E, and PVA-124, some benchmark bands in the market. It has been widely used as a sizing agent in paper manufacturing, a warp sizing agent in textiles, and as a raw material for PVA panels or PVA thin films. This product can also be used in adhesives, paints, and coatings.

Dragonpovol Polyvinyl Alcohol (24-99 Grade) is a normal band of the PVA family, which can generally be used as an equivalent for BF-24, PVA-124, and JF-25, some benchmark bands in the market. It has been widely used as a sizing agent in paper manufacturing, a warp sizing agent in textiles, and a raw material for PVA panels, or PVA thin films. It can also be used in adhesives, paints, and coatings.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.