Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 68891-29-2
- EC No.
- 500-233-2
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Biodegradability
Product is readily biodegradable.
- Stepan Gypsum Foamer Technologies
- Wide range of coalescing abilities to obtain desired bubble size
- High flash point options
- Low actives (30-40%)
- High actives (50-60%)
- Formaldehyde-free options
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- Applications
CEDEPAL FA-406 is a unique surfactant that provides maximum foaming power in soft and hard water, saturated brine, and gypsum solutions. It is a good all purpose foaming agent. CEDEPAL FA-406 is used as a foaming agent for wall board. It is also useful for drilling in gas and oil fields and concrete admixtures.
Properties
- Physical Form
- Appearance
- Clear yellow liquid
- Typical Properties
Value Units Test Method / Conditions pH (in 10% aqueous solution) 7.0 - 7.5 - - Actives Content (EW 338) 58 - 60 % - Pour Point -25 °C - Freeze Point -28 °C - Cloud Point 25 °C - Color max. 5 - Gardener Scale Viscosity (at 25°C) 20 cPs - Viscosity (at 60°C) 10 cPs - Flash Point 28 °C - Density 1.03 g/ml - Critical Micelle Concentration (CMC) 3.15 mg/L - Regulated Volatile Organic Chemicals (Ethanol) 13-16 % U.S. EPA
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) of CEDEPAL FA-406 can be found in Section 15 of the Safety Data Sheet (SDS).It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Toxicity
Alkyl ether sulfates are practically non-toxic orally (LD50 >5 g/kg) and minimally irritating to skin and eyes at 1%.
Packaging & Availability
Storage & Handling
- Storage & Handling
Handle CEDEPAL FA-406 with care; use away from sparks and open flame. Use in well ventilated area. Contact with eyes, nose or prolonged skin contact should be avoided. Use gloves and safety goggles when handling CEDEPAL FA-406. Wash thoroughly after handling material. It is recommended that CEDEPAL FA-406 be stored in sealed containers and kept in a cool, dry place. Polyethylene drums are recommended for storage of CEDEPAL FA-406. CEDEPAL FA-406 should be stored in 316 stainless steel. Atmospheric storage with flame arrestor is recommended. All fittings should be electrically grounded. Material can be stored between 80 - 90 °F. An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316 stainless steel.