Products in Building Materials: Prepreg

PREPREG system BD (epoxy resin) are based on modified epoxy resins with high impact strength and excellent dynamic properties. They can be processed into high-strength structural components using all common methods. The hardening range is between 85 ° C and 140 ° C ; the max. heat resistance is 125 ° C . The delivery program with fabric, laid and unidirectional reinforced PREPREGS allows the load-based design of your components.

HS Carbon Fiber UD600H60 is a E3 Matrix System with a precursor as PAN.

HS Carbon Fiber UD250H60 is a E3 Matrix System with a precursor as PAN.

THINPREG™ TP 190 is a system designed for aeronautic structural part, combining high strength and high toughness with a very good thermal stability. The PES-toughened epoxy system shows outstanding compression and fatigue properties.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Australian Composites Auspreg UV is a range of UV curable resin impregnated fiber glass prepregs which have been especially designed to cure from a wet plyable form to a completely hard product within minutes through exposure to either outdoors sunlight or high intensity artificial light. The technology is useful for repairing a whole range of surfaces and parts as a long term structural solution to wood, bitumen, concrete, metals and enables repair of damaged materials without the need for costly replacement. It is also highly effective in creating and manufacturing products in place of traditional hand lay up manufacturing, infusion systems, and oven cure methodologies.

Natex P-Preg PP UD 750 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polypropylene with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 750 g/m2.

IM Carbon Fiber UD150H60-T1000 GRADE is a E3 Matrix System with a precursor as PAN.

Unidirectional CARBON FIBER PRE-PREG TAPE may be stored at 72°F for 30 days and for maximum shelf life, store in a freezer and bring up to room temperature for fabrication.

Plain weave CARBON FIBER PW 3K PRE-PREG may be stored at 75° F for a shelf life of 90 days and for maximum shelft life, sotre below 10° F for a maximum of 2 years and bring to room temperature for fabrication.

Natex P-Preg PA11 P1/1 900 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polyamide 11 with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.

PREPREG system BE (epoxy resin) are based on a temperature- resistant modified epoxy resin . Its processing is hot pressing or PREPREG winding. Its tack has no to little stickiness.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

IM Carbon Fiber UD100 H60-MR60H is a E3 Matrix System with a precursor as PAN.

FIBERGLASS 7781 PRE-PREG may be stored at 70° F for a maximum shelf life of 7 days and for maximum shelf life, store below 40° F for a maximum of 6 months and bring to room temperature for fabrication.

HS Carbon Fiber UD125H60 is a E3 Matrix System with a precursor as PAN.

THINPREG™ GF736 is a toughened epoxy adhesive film, with excellent tack and drape characteristics, supplied on a paper backer either in an unsupported format or with an embedded ultra-lightweight glass carrier to aid handling. GF736 offers many advantages for bonding composite laminates, either to other laminates, or to structural cores, including; consistent bond-line thickness and weight, high strain to failure, high toughness, handling convenience, controlled flow and a 6 week out-life at ambient temperature (18-22ºC/64-72ºF).

PSR133 is a high performance phenolic resin available in neat resin and prepreg form. Prepregs manufactured with PSR 133 meet the stringent requirements of MIL-R-9299C, Grade B. PSR133 is the most cost effective phenolic available and offers excellent char yield for carbon/carbon applications and does not exhibit micro-cracking in high modulus composite structures.

IM Carbon Fiber UD100H60-MR70 is a E3 Matrix System with a precursor as PAN.