Products in Building Envelope & Roofing: Surfactant

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

Redicote EM44 is a liquid emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat. Emulsifier for phosphoric acid slurry and micro surfacing systems.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Wetfix 312 is a liquid adhesion promoter for hot and warm mix. It is an adhesion promoter for cold and warm mix based on cut-back bitumen. Adhesion promoter and coating aid for foamed bitumen cold mix.

Diamine HBG Pellets is an active adhesion agent in solid (pellet) form for hot bitumen, cut back bitumen, and soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Diamine OLBS is an active adhesion agent for hot bitumen, cut back bitumens, soft bitumens and emulsions used in surface dressing (chipseal), and cold and warm mixes including those using reclaimed materials.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Redicote EM-44A is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal, tack coat and open-graded cold mix. Emulsifier for slurry surfacing and cold mix when used with phosphoric acid.

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

PEL-SIL™ 9868 is a silicone surfactant that is polyol compatible and especially designed for compatibility with pentane. It is useful in appliance insulation formulations and laminated continuous rigid board foam. PEL-SIL™ 9868 is designed to maximize the k-factor in initial and long term aging in pentane blown foam. With the above blowing agent it will produce foam with excellent flow characteristics, a high percent of closed cells and improved compressive properties.

Amphi® CL is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is both TSCA-approved and REACH-registered, making it ideal for industrial use as a dispersant, emulsifier, and wetting agent. Among its exceptional attributes are its low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. Moreover, it is USDA-certified, readily biodegradable, and free from both prop 65 issues and 1,4-dioxane. Lastly, it is non-GMO, palm oil-free, and boasts a low carbon footprint.

PEL-SIL™ 1315 is an efficient isocyanate or polyol compatible, liquid surfactant especially designed for isocyanurate applications. In isocyanurate formulations, it will produce foam with excellent flowability under a variety of foaming conditions. Other applications include foam for low density appliances. Flame retardant transportation and construction foams, and high density water blown formulations. A good starting point would be 0.5 to 0.9% of PEL-SIL™ 1315 on the total weight of the reactants.

Amphi® CH is an incredibly versatile biosurfactant utilizing the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-approved and REACH-registered, making it prime for industrial applications as a dispersant, emulsifier, and wetting agent. Amphi® CH's exceptional attributes include low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. Additionally, it is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Furthermore, it is non-GMO, palm oil-free, and has a low carbon footprint.

Amphi® M is a highly versatile biosurfactant that utilizes the unique properties of sophorolipids (SLP) in the glycolipid class. This 100% fermentation-produced solution is TSCA-approved and REACH-registered, making it perfect for industrial use as a dispersant, emulsifier, and wetting agent. Amphi® M a number of exceptional attributes, including low HLB, low to no foam, hydrophobicity, and excellent degreasing abilities. It is USDA-certified, readily biodegradable, and free from prop 65 issues and 1,4-dioxane. Additionally, it is non-GMO and palm oil-free, with a low carbon footprint.

PEL-SIL™ 1316 silicone surfactant is compatible with polyols and specially designed for use with pentane in both appliance formulations and laminated continuous rigid board foam. PEL-SIL™ 1316 is designed to maximize the k value both initially and in long term aging. PEL-SIL™ 1316 will produce foam with excellent flowability and a high percent of closed cells.

SULFOROKAnol L327 (Sodium C12-15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Pareth Sulfate), based on synthetic alcohol. The product comes in the form of a 27% water solution, from colorless to light yellow. SULFOROKAnol L327 is preserved with the MIT / CIT derivative, which ensures its microbiological purity.

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.